Check Point L-50
Check Point L-50 Network Appliance with 8-Port Gigabit LAN Switch | |||||||||||||||||
WikiDevi.wi-cat.ru | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3rd Party Firmware | |||||||||||||||||
dd-wrt |
Status Unknown | ||||||||||||||||
OpenWrt | |||||||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||||||
Gargoyle |
Status Unknown | ||||||||||||||||
Platform | |||||||||||||||||
Brand • Model • Rev |
Check Point L-50 | ||||||||||||||||
Model Part Number |
CPAP-SG1120-FW | ||||||||||||||||
Board ID |
490ADK00C-1.6MM | ||||||||||||||||
Type |
security appliance | ||||||||||||||||
CPU1 |
Marvell 88F6281 | ||||||||||||||||
CPU1 Type |
ARMv5 | ||||||||||||||||
CPU1 Speed |
1.2 GHz | ||||||||||||||||
Flash1 Chip |
Samsung K9F4G08U0D-SCB0 | ||||||||||||||||
Flash1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (NAND) | ||||||||||||||||
RAM1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR2 SDRAM) | ||||||||||||||||
RAM1 Chip |
Nanya NT5TU128M8GE-AC x 4 | ||||||||||||||||
ETH chip1 |
Marvell 88F6281 | ||||||||||||||||
ETH chip2 |
Marvell 88E1116R | ||||||||||||||||
ETH chip3 |
Marvell 88E6171R | ||||||||||||||||
Ethernet Port Count |
2-1GbE-WAN 8-1GbE-LAN | ||||||||||||||||
Wired Standard |
IEEE 802.3i/3u/3ab | ||||||||||||||||
Stock bootloader |
U-Boot 1.1.4 Check Point version: 983002039 | ||||||||||||||||
Stock FW OS |
Linux 2.6.22.18 | ||||||||||||||||
Expansion IF types |
SD Card slot, ExpressCard/34 (USB), USB 2.0 (Type A) | ||||||||||||||||
ExpressCard slots |
1 | ||||||||||||||||
USB ports |
1 | ||||||||||||||||
SD/MMC Slots |
1 | ||||||||||||||||
USB Hub Compatible |
Untested | ||||||||||||||||
Power |
12 VDC, 2 A | ||||||||||||||||
Connector type |
barrel 5.5 mm (OD) 2.1 mm (ID) 9.5 mm (LEN) | ||||||||||||||||
Serial Port (UART) |
yes, console port, RJ45, (9600 8N1) | ||||||||||||||||
Flags: RTC w/ battery, metal case, heatsink | |||||||||||||||||
Additional chips | |||||||||||||||||
Other | |||||||||||||||||
Default IP address: 192.168.1.1 | |||||||||||||||||
Manuf/OEM/ODM |
SerComm SG-80A | ||||||||||||||||
3rd Party Firmware Support | |||||||||||||||||
Retail | |||||||||||||||||
Availability | End of Life | ||||||||||||||||
End of Life date | June 2022 | ||||||||||||||||
(Est.) release date | April 2013 | ||||||||||||||||
(Est.) initial retail price (in USD): | $600 | ||||||||||||||||
Country of manuf | Taiwan | ||||||||||||||||
|
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
Overview
Check Point L-50 - 8 Port Gigabit Firewall Appliance
- CPAP-SG1120-FW
Hardware specification
- CPU: Marvell 88F6281 ARM v5 (@1.2GHz)
- Memory: 512MB (SDRAM) DDR2
- Storage: 512MB NAND Flash, SD Card Slot
- Network: 12x Gigabit Ethernet
- USB: 2x USB 2.0 ports
Links of Interest
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt Wiki
OpenWrt Target: kirkwood
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_xscale
Support started version: 21.02.0
Current supported version: 23.05.5
Unsupported Functions:
DSL modem
Please insert instructions here