Calao Systems TNY-A9263
From TechInfoDepot
Jump to navigationJump to search| Single Board Computer | |
| 3rd Party Firmware | |
|---|---|
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Calao Systems TNY-A9263 |
| Type |
single-board computer |
| CPU1 |
Atmel AT91SAM9263 |
| CPU1 Speed |
200 MHz |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (NAND) |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 |
Atmel AT91SAM9263 |
| Ethernet Port Count |
1-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u |
|
| |
| Stock bootloader |
U-Boot |
| Expansion IF types |
USB 2.0 |
| USB ports |
1 |
| USB Hub Compatible |
Untested |
| Power |
5 VDC, ? A |
| Connector type |
USB |
| Serial Port (UART) |
yes, 5, (115200 8N1) |
| Other | |
|
| |
| 3rd Party Firmware Support | |
For a list of all currently documented Atmel chipsets with specifications, see Atmel.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: at91
OpenWrt Subtarget: sam9x
OpenWrt Package architecture: arm_arm926ej-s
Support started version: 17.01.1
Current supported version: 23.05.5
OpenWrt Target: at91
OpenWrt Subtarget: sam9x
OpenWrt Package architecture: arm_arm926ej-s
Support started version: 17.01.1
Current supported version: 23.05.5
Please insert instructions here
