CNet CNAP-711

b (B11)
11Mbps Wireless LAN Access Point
WikiDevi.wi-cat.ru	CNet CNAP-711
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	CNet CNAP-711
FCC ID	IIO-0252WLAP
Type	access point
CPU1	Atmel AT76C510
Flash1 Chip	Atmel AT29LV040A-20TI
Flash1 Size	512 KiB 0.5 MiB <br />524,288 B <br />4,096 Kib <br />4 Mib <br />4.882812e-4 GiB <br />
RAM1 Size	512 KiB 0.5 MiB <br />524,288 B <br />4,096 Kib <br />4 Mib <br />4.882812e-4 GiB <br />
RAM1 Chip	Alliance AS7C34096-10TC
ETH chip1	Atmel AT76C510
ETH chip2	Realtek RTL8201BL
Ethernet Port Count	1-10MbE-LAN
Wired Standard	IEEE 802.3i
802dot11 OUI: 00:08:A1 (2 E, 10 W) Ethernet OUI: 00:08:A1 (2 E, 10 W)
Expansion IF types	none specified
Power	5 VDC, 2.1 A
Connector type	barrel
Additional chips Low-voltage CPLD;Atmel;ATF1504ASV;ATMEL, ATF1504ASV, 15AC44 0238;1; HF LNA/Mixer;RFMD;RF2494;RF, 2494, 0241;1; 2.4GHz RF Synthesizer w/ Integrated VCOs;Silicon Labs;Si4126;SI4126, BM, 0239DC, EA21;1; 1.8GHz to 2.8GHz Linear Power Amplifier IC;RFMD;RF5117;RF, 5117, 24AC;1;
Other
Default IP address: 192.168.0.254 the IP 192.168.0.254 is used by 49 additional devices of which 0 are CNet devices Default login user: blank Default login password: WLAN
Retail
FCC approval date	14 January 2003
Country of manuf	Taiwan
Radio 1
Chip1	Atmel AT76C510
Chip2	RFMD RF3000
Chip3	RFMD RF2948B
Wireless interface OUI	00:08:A1
Antenna Connector Type	none specified
Wireless Standard	IEEE 802.11b
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Atmel chipsets with specifications, see Atmel.
For a list of all currently documented RFMD (Qorvo) chipsets with specifications, see RFMD.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented CNet device with specifications, see CNet.

• 11 Mbps - 2.4GHz 802.11b = B11 class

Overview

"Access Point", "05-01-0484-03", and a date code of 0246 (November 2012) is silkscreened on the board in the FCC photos.

This device would appear to only be configurable via SNMP. Default settings are per the FCC manual.

The sample SSID in the manual is WLAN_AP.

The power adapter shown in the FCC photos is a Spec Lin Enterprise Co., Ltd. SL15A205-U (100-240VAC ~ 50-60Hz, 0.5A max. -> 5VDC, 2.5A).

Additional specs, per the manual

Typical Receiver Sensitivity w/ 11b rates (10E^-5 BER) (more)

• -85 dBm @ 1M
• -81 dBm @ 11M