CNet CDR-905

From TechInfoDepot
Jump to navigationJump to search
bgn (N150)
11n Download Server Router
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
CNet CDR-905
FCC ID
Type
wireless router
CPU1
Realtek RTL8651C
CPU1 Type
Lexra RLX5280
CPU1 Speed
not specified
Flash1 Chip
Macronix Model?
Flash1 Size
? MiB
RAM1 Size
? MiB
RAM1 Chip
Brand? Model? x 2
ETH chip1
Realtek RTL8651C
Switch
Realtek RTL8651C
Ethernet Port Count
1-100MbE-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types
USB 2.0
USB ports
1
USB Hub Compatible
Untested
Power
5 VDC, 2.5 A
Connector type
barrel
Other

Default SSID: Broadband_Router
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 6 are CNet devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1330 additional devices
of which 5 are CNet devices

Retail
FCC approval date 19 February 2009
Country of manuf Taiwan
Radio 1
Chip1
Realtek RTL8190
Chip2
Realtek RTL8256
Wireless interface OUI
none specified
Antenna Connector Type
RP-SMA
MIMO status
1x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 150 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented CNet device with specifications, see CNet.

150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class


Overview

"EPMBCXR905BCN2ET" is silkscreened on the board in the FCC photos.

This is an Amigo / E-TOP device.

The FCC test report notes the models covered as the...

  • E-TOP BR760n (no USB), DR768n (USB)
  • Amigo BR760n (no USB), DR768n (USB)
  • CNet (w/out USB) CWR-905, WR-905, WR-100N, WR-95N, WR-900N, BR-100N, BR-95N, BR-900N
  • CNet (w/ USB) CDR-905, DR-905, DR-100N, DR-95N, DR-900N
  • SAPIDO (w/out USB) RB1402
  • SAPIDO (w/ USB) WE1412, WE1422, GR1412, GR1422

Default settings (including the SSID..) are per the FCC manual. They could be completely wrong...

The power supplies noted in the test report are...

  • Amigo AMS2-0501500FU (100-240VAC ~ 50/60Hz, 0.5A -> 5VDC, 1.5A)
  • LB M2-I2USG05R-A (100-240VAC ~ 50/60Hz, 0.5A -> 5VDC, 2.5A)