Buffalo WMR-300
bgn (N300) | |
|---|---|
| N300 Wireless Travel Router | |
 | |
| Homepage |
Product page (JP) |
| Wikipedia | |
| WikiDevi.wi-cat.ru | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Buffalo WMR-300 |
| FCC ID | |
| IC ID | |
| Type |
travel router |
| CPU1 | |
| CPU1 Type |
MIPS 24KEc |
| CPU1 Speed |
580 MHz |
| Flash1 Chip |
Macronix MX25L6406EM2I-12G |
| Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
SK hynix H5PS5162GFR-S6C |
| ETH chip1 | |
| Ethernet Port Count |
1-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u |
| Stock bootloader |
U-Boot 1.1.3 Ralink UBoot |
| Stock FW OS |
Linux 2.6.36 |
| Expansion IF types |
none specified |
| Power |
5 VDC, 0.5 A |
| Connector type |
USB Male A |
| Serial Port (UART) |
yes, 3.3V TTL, 4-pin header, unpopulated, (57600 8N1) |
|
Additional chips | |
| Other | |
|
Default SSID: Buffalo-G-XXXX (9 addl. devices) | |
| Manuf/OEM/ODM |
Gemtek WRTR-299GN |
| 3rd Party Firmware Support | |
| Retail | |
| Availability | End of Life |
| End of Life date | 2016 |
| FCC approval date | 19 April 2013 |
| UPC |
747464127101 (UPC DB, On eBay) |
| Newegg | N82E16833162079 |
| ASIN |
B00DJ6AFX4  |
| Country of manuf | China |
| Radio 1 | |
| Chip1 | |
| Wireless interface OUI |
B0:C7:45 |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Buffalo device with specifications, see Buffalo.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
"S07-8901R RoHS" and "WRTR-299GN_V01" appears to be silkscreened on the board in the FCC photos.
Default settings are per the FCC sample label.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: ramips
OpenWrt Subtarget: mt7620
OpenWrt Package architecture: mipsel_24kc
Support started version: 14.07
Current supported version: 23.05.5
Please insert instructions here
See also
Series
- Buffalo WMR-300 - 4981254009093
- Buffalo WMR-300S - 4981254018859
- Buffalo WMR-300-RD - 4981254018842
- Buffalo WMR-300S-RD - 4981254018873
- Buffalo WMR-300-WH - 4981254011249
- Buffalo WMR-300S-WH - 4981254018866
