Buffalo WLI-TX4-AG300N

abgn (AN600)
Buffalo AirStation Nfiniti Dual Band Wireless-N Ethernet Converter

Homepage	Product page (EN)
Wikipedia	Buffalo Inc.
InfoDepot Wiki	Buffalo WLI-TX4-AG300N
WikiDevi.wi-cat.ru	Buffalo WLI-TX4-AG300N
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Was Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	Buffalo WLI-TX4-AG300N
FCC ID	FDI-09102074-0
Type	bridge
CPU1	Ralink RT2880
CPU1 Type	MIPS 4KEc
CPU1 Speed	266 MHz
Flash1 Chip	Macronix MX29LV320EBTI-70G
Flash1 Size	4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size	32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip	EtronTech EM639165TS-6G x 2
ETH chip1	Ralink RT2880
Switch	IC+ IP175C
Ethernet Port Count	4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: 00:24:A5 (3 E, 8 W) Ethernet OUI: 00:24:A5 (3 E, 8 W)
Stock bootloader	U-Boot 1.1.3
Stock FW OS	Linux 2.4.30
Expansion IF types	none specified
Power	12 VDC, 1.5 A
Serial Port (UART)	yes, internal, unpopulated, 3.3V TTL, 4-pin header, (57600 8N1)
JTAG Port	probably
Additional chips 3A, 23V, 340KHz Synchronous Rectified Step-Down Converter;MPS;MP2307DN;;1; 1A Low Dropout Positive Voltage Regulator;Richteck;RT9164A;;1; 5GHz Power Amplifier IC;Richwave;RTC6671;;2;
Other
Default IP address: 1.1.1.1 the IP 1.1.1.1 is used by 2 additional devices of which 2 are Buffalo devices Default login user: root Default login password: blank root:blank credentials used by 72 additional devices of which 24 are Buffalo devices
Manuf/OEM/ODM	Gemtek WACR-130N
3rd Party Firmware Support	OpenWrt (Was)
Retail
Availability	End of Life
End of Life date	2017
FCC approval date	19 January 2009
(Est.) release date	01 April 2009
UPC	747464118482 (UPC DB, On eBay)
Newegg	N82E16833162029
ASIN	B001QVN2NE
Radio 1
Chip1	Ralink RT2880
Chip2	Ralink RT2850
Wireless interface OUI	00:24:A5
Antenna Connector Type	U.FL
MIMO status	2x3:2
Wireless Standard	IEEE 802.11a/b/g/n
802.11n	up to 300/300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	2.4 or 5 GHz

For a list of all currently documented IC+ chipsets with specifications, see IC+.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.

For a list of all currently documented Buffalo device with specifications, see Buffalo.

• 300 Mbps - 2SS 5GHz 802.11n (40MHz chan.),

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AN600 class

Links of Interest

High-res images on the DD-WRT forums

Flashing

NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power.

Flashing OpenWrt

This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details.

This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now.

OpenWrt support for this device has ended in 2022.
19.07.10 was the last official build for 4/32 devices.

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: rt288x
OpenWrt Package architecture: mipsel_mips32r2
Support started version: 14.07
Current supported version: 19.07.10
Image too big: snapshot
Unsupported Functions:
Switch module missing so no wired access, unable to save configuration changes.
Comment:
Images are currently broken! See https://dev.openwrt.org/ticket/22318; Image build disabled in master with commit d7d46da938e3

Please insert instructions here