Buffalo WLA2-G54L
From TechInfoDepot
Jump to navigationJump to searchbg (G54) | |||||||
---|---|---|---|---|---|---|---|
AirStation Wireless Access Point | |||||||
Wikipedia | |||||||
InfoDepot Wiki | |||||||
WikiDevi.wi-cat.ru | |||||||
3rd Party Firmware | |||||||
dd-wrt | |||||||
OpenWrt |
Incompatible | ||||||
Tomato any flavor |
Incompatible | ||||||
Gargoyle |
Status Unknown | ||||||
Platform | |||||||
Brand • Model • Rev |
Buffalo WLA2-G54L | ||||||
FCC ID | |||||||
Type |
bridge, access point | ||||||
CPU1 | |||||||
CPU1 Type |
MIPS BMIPS3300 | ||||||
CPU1 Speed |
200 MHz | ||||||
Flash1 Chip |
Brand? Model? | ||||||
Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> | ||||||
RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||||
RAM1 Chip |
Brand? Model? | ||||||
ETH chip1 | |||||||
Switch |
ADMtek ADM6996L | ||||||
Ethernet Port Count |
4-100MbE-LAN | ||||||
Wired Standard |
IEEE 802.3i/3u | ||||||
Expansion IF types |
none specified | ||||||
Power |
3.3 VDC, 1.1 A | ||||||
Connector type |
barrel | ||||||
Serial Port (UART) |
yes | ||||||
JTAG Port |
yes | ||||||
Other | |||||||
| |||||||
3rd Party Firmware Support | |||||||
Retail | |||||||
FCC approval date | 21 September 2004 | ||||||
Radio 1 | |||||||
Chip1 | |||||||
Chip2 |
Broadcom BCM2050 | ||||||
Wireless interface OUI |
00:0D:0B | ||||||
Antenna Connector Type |
MC | ||||||
Wireless Standard |
IEEE 802.11b/g | ||||||
802.11g |
up to 54 Mbps | ||||||
802.11b |
up to 11 Mbps | ||||||
WiFi Operating Frequency |
2.4 GHz | ||||||
Radio cor_rev |
7 | ||||||
|
For a list of all currently documented ADMtek chipsets with specifications, see ADMtek.
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Buffalo device with specifications, see Buffalo.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Overview
The power adapter included with the device is a Buffalo UIA312-3320 (3.3V, 2A).
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Supported by dd-wrt as of = v23 build 1907 20060515
First flash use ddadder or Tftp flash
Please insert instructions here
Pictures
Categories:
- Buffalo
- Embedded system/bridge
- Embedded system/access point
- Embedded System Broadcom
- Embedded System BCM4712
- Broadcom
- Embedded System MIPS
- Embedded System BMIPS3300
- Embedded System ADMtek
- Embedded System ADM6996L
- ADMtek
- DD-WRT Supported
- Embedded System BCM2050
- Embedded System IEEE 802.11b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Embedded System
- English Documentation