Buffalo WLA2-G54C

From TechInfoDepot
Jump to navigationJump to search
bg (G54)
Wireless Compact Repeater Bridge
Buffalo WLA2-G54C.jpg
Wikipedia
InfoDepot Wiki
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
OpenWrt
Tomato any flavor
Incompatible
Gargoyle
Status Unknown
Platform
BrandModelRev
Buffalo WLA2-G54C
FCC ID
Type
access point, bridge, repeater
CPU1
CPU1 Type
MIPS BMIPS3300
CPU1 Speed
200 MHz
Flash1 Chip
Intel TE28F320J3C110
Flash1 Size
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip
Dynachips D98SD6416AH-6
ETH chip1
ETH chip2
IC+ IP101
Ethernet Port Count
1-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types
none specified
Power
3.3 VDC, 2 A
Connector type
barrel
Other

Default IP address: 192.168.11.100
the IP 192.168.11.100 is used by 2 additional devices
of which 2 are Buffalo devices
Default login user: root
Default login password: blank
root:blank credentials used by 70 additional devices
of which 24 are Buffalo devices

Manuf/OEM/ODM
Gemtek WAPB-124G
3rd Party Firmware Support
DD-WRT • (List)
, OpenWrt • (List | Dev | DLs)
Retail
FCC approval date 28 December 2004
UPC 747464109411
(UPC DB, On eBay)
ASIN B0006NMS74 Flag of the United States.svg
Radio 1
Chip1
Chip2
Broadcom BCM2050
Wireless interface OUI
none specified
Antenna Connector Type
MC
Wireless Standard
IEEE 802.11b/g
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio cor_rev
7
 FCC ID
Buffalo WLI3-TX1-G54FDI-09101669-0

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented IC+ chipsets with specifications, see IC+.

For a list of all currently documented Buffalo device with specifications, see Buffalo.

54 Mbps - 2.4GHz 802.11g = G54 class

Overview

OEM Gemtek WAPB-124G (WAPB-124G V01)

Links of Interest

Flashing

Flashing dd-wrt

Supported by dd-wrt as of = v23 SP3

initial flash: use ddadder or Tftp flash

Please insert instructions here

Flashing OpenWrt

On the OpenWrt Forum
Support started version: ?
Current supported version: ?

OpenWrt HOWTO

Please insert instructions here

JTAG-Serial Info

JTAG

JTAG Pinouts

JTAG Pinouts
nTRST   1o o2	GND
  TDI   3o o4	GND
  TDO   5o o6	GND
  TMS   7o o8	GND
  TCK   9o o10	GND
nSRST  11o o12  N/C

Using Universal JTAG Adapter

white    1o o2	 black
  red    3o o4	 GND
 blue    5o o6	 GND
green    7o o8	 GND
yelow    9o o10  GND
orange  11o o12  N/C
  • /noemw switch required

JTAG Recovery

  1. Backup CFE x2 (Compare the files, they must match exactly or there is something wrong with your JTAG setup)
  2. Erase Wholeflash x2
  3. Flash CFE
  4. Unplug Power
  5. Unplug JTAG Cable

TFTP:

  1. Set Rig ip static 192.168.1.10
  2. Plug network cable from rig to port 1
  3. Plug in power
  4. click upgrade.
  5. wait, wait, wait. If you cannot browse the GUI of the router, return to step 1.
  6. Hard Reset 30\30\30