Buffalo WLA-G54C
From TechInfoDepot
Jump to navigationJump to searchbg (G54) | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
access point | |||||||||||||
![]() | |||||||||||||
Wikipedia | |||||||||||||
InfoDepot Wiki | |||||||||||||
3rd Party Firmware | |||||||||||||
dd-wrt |
Status Unknown | ||||||||||||
OpenWrt |
Incompatible | ||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||
Gargoyle |
Status Unknown | ||||||||||||
Platform | |||||||||||||
Brand • Model • Rev |
Buffalo WLA-G54C | ||||||||||||
FCC ID |
none specified | ||||||||||||
Type |
access point | ||||||||||||
CPU1 ![]() |
Broadcom BCM4702 | ||||||||||||
CPU1 Type |
BMIPS3300 | ||||||||||||
CPU1 Speed |
125 MHz | ||||||||||||
Flash1 Chip |
Brand? Model? | ||||||||||||
Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> | ||||||||||||
RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||||||||||
RAM1 Chip |
Brand? Model? | ||||||||||||
ETH chip1 |
Broadcom BCM4702 | ||||||||||||
Ethernet Port Count |
1-LAN | ||||||||||||
802dot11 OUI: none specified | |||||||||||||
Expansion IF types |
none specified | ||||||||||||
Power |
3.3 VDC, ? A | ||||||||||||
Serial Port (UART) |
yes | ||||||||||||
Other | |||||||||||||
| |||||||||||||
3rd Party Firmware Support | |||||||||||||
Radio 1 | |||||||||||||
Chip1 |
Broadcom Model? | ||||||||||||
Wireless interface OUI |
none specified | ||||||||||||
Antenna Connector Type |
none specified | ||||||||||||
Wireless Standard |
IEEE 802.11b/g | ||||||||||||
802.11g |
up to 54 Mbps | ||||||||||||
802.11b |
up to 11 Mbps | ||||||||||||
WiFi Operating Frequency |
2.4 GHz | ||||||||||||
Radio cor_rev |
5 | ||||||||||||
|
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Buffalo device with specifications, see Buffalo.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Supported by dd-wrt as of = v24 preSP2 13064
initial flash: use ddadder or Tftp flash
Please insert instructions here