Buffalo WHR-HP-G125
bg (G54) | |||||
|---|---|---|---|---|---|
| Buffalo Technology Wireless-G High Power Router and Access Point | |||||
| Wikipedia | |||||
| WikiDevi.wi-cat.ru | |||||
| 3rd Party Firmware | |||||
| dd-wrt | |||||
| OpenWrt |
Incompatible | ||||
| Tomato any flavor |
Incompatible | ||||
| Gargoyle |
Status Unknown | ||||
| Platform | |||||
| Brand • Model • Rev |
Buffalo WHR-HP-G125 | ||||
| FCC ID | |||||
| IC ID | |||||
| Type |
wireless router | ||||
| CPU1 | |||||
| CPU1 Type |
BMIPS3300 | ||||
| CPU1 Speed |
240 MHz | ||||
| Flash1 Chip |
Winbond W19B320ABT7H | ||||
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> | ||||
| RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||
| RAM1 Chip |
Brand? Model? | ||||
| ETH chip1 | |||||
| Switch | |||||
| Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN | ||||
| Wired Standard |
IEEE 802.3/3u | ||||
|
802dot11 OUI: none specified | |||||
| Expansion IF types |
none specified | ||||
| Power |
? VDC, ? A | ||||
| Connector type |
barrel | ||||
|
Flags: high power | |||||
| Other | |||||
|
Default IP address: 192.168.11.1 | |||||
| 3rd Party Firmware Support | |||||
| Retail | |||||
| FCC approval date | 26 March 2007 | ||||
| Radio 1 | |||||
| Chip1 | |||||
| Wireless interface OUI |
none specified | ||||
| Antenna Connector Type |
RP-SMA | ||||
| Wireless Standard |
IEEE 802.11b/g | ||||
| 802.11g |
up to 54 Mbps | ||||
| 802.11b |
up to 11 Mbps | ||||
| WiFi Operating Frequency |
2.4 GHz | ||||
| Radio cor_rev |
13 | ||||
| |||||
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Buffalo device with specifications, see Buffalo.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Overview
There would seem to be multiple revisions of this device.
- "790BR102200Q" is silkscreened on the board in the FCC photos of FCC ID FDI-09101584-0 (revision 1?) - it's Quanta (QMI) manufactured
- "BCM5354-HPG-BA" is silkscreened on the board in the FCC photos of FCC ID FDI-09101588-0 (revision 2?)
The default IP is 192.168.1.1 is the IP address with the router switch on. The default IP is 192.168.11.100 is the IP address with the router switch off.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Supported by dd-wrt as of = v24-build 7013 20070509
- First flash use Tftp flash
Please insert instructions here
