Buffalo Kuro-box Pro
Single Disk NAS Enclosure | |
Wikipedia | |
---|---|
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt | |
OpenWrt |
Status Unknown |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Buffalo Kuro-box Pro |
Type |
NAS |
CPU1 |
Marvell 88F5182 |
CPU1 Type |
ARMv5 Feroceon core |
CPU1 Speed |
400 MHz |
Flash1 Chip |
STMicro NAND02GW3B2CN6 |
Flash1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
Flash2 Chip |
SST 39VF020 |
Flash2 Size |
256 KiB 0.25 MiB <br />262,144 B <br />2,048 Kib <br />2 Mib <br />2.441406e-4 GiB <br /> |
RAM1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
RAM1 Chip |
Elpida E5116ANSE x 2 |
ETH chip1 |
Marvell 88F5182 |
ETH chip2 |
Marvell 88E1118R |
Ethernet Port Count |
1-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
Stock bootloader |
U-Boot 1.1.1 Marvell 1.12.1 TINY |
Stock FW OS |
Linux 2.6.12-6-arm1 |
Expansion IF types |
USB 2.0, SATA, PCIe |
Mini PCIe slots |
1 |
USB ports |
2 |
SATA Ports |
2 |
USB Hub Compatible |
Untested |
Power |
120 VAC ~ 60 Hz, ? A |
Connector type |
C7 |
Serial Port (UART) |
yes, 3.3V TTL, 4-pin header, (115200 8N1) |
JTAG Port |
yes |
Flags: RTC w/ battery backup, fan | |
Additional chips | |
Other | |
Default IP address: 192.168.11.150 | |
3rd Party Firmware Support | |
Retail | |
UPC |
4981254582268 (UPC DB, On eBay) |
ASIN | B000VZWWXW |
Country of manuf | Japan |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Buffalo device with specifications, see Buffalo.
Overview
- Main board silkscreened with "MADE IN JAPAN" and "MVLS2EG-CA"
- PCIe and SATA ports are on sub-board silkscreened with "LSGLSUB-CA" and "MADE IN CHINA"
Links of Interest
Buffalo Wiki alternative firmware