BenQ AWL700

b (B11)
wireless router
WikiDevi.wi-cat.ru	BenQ AWL700
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	BenQ AWL700
FCC ID	JVPAWL700
Type	wireless router
CPU1	Samsung S3C4510B
CPU1 Type	ARM7TDMI-S
CPU1 Speed	200 MHz 32-bit
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	Samsung Model?
ETH chip1	Samsung S3C4510B
ETH chip2	Realtek RTL8201L
Switch	Atan AT8985P
Ethernet Port Count	1-WAN 4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: 00:03:9D (1 E, 1 W) Ethernet OUI: 00:03:9D (1 E, 1 W)
Expansion IF types	PCMCIA (16-bit)
PCMCIA slots	1
Power	5 VDC, 2.5 A
Connector type	barrel
Flags: schematics
Other
Default SSID: BenQ Default IP address: 192.168.1.1 the IP 192.168.1.1 is used by 1324 additional devices of which 1 are BenQ devices Default login user: admin Default login password: admin admin:admin credentials used by 1342 additional devices of which 1 are BenQ devices
Retail
FCC approval date	01 August 2002
Radio 1
Radio1 module	BenQ AWL100
Radio1 module IF	PCMCIA (16-bit)
Chip1	Intersil ISL3873B
Chip2	Intersil ISL3685
Wireless interface OUI	00:03:9D
Antenna Connector Type	U.FL
Wireless Standard	IEEE 802.11b
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

Atan not currently documented.
For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented Samsung chipsets with specifications, see Samsung.

For a list of all currently documented BenQ device with specifications, see BenQ.

• 11 Mbps - 2.4GHz 802.11b = B11 class

Overview

Uses the KS32C50100 / S3C4510.

Default settings (including the SSID) are per the FCC manual.

The FCC label has a MAC label w/ 00:03:9D (Qisida) OUI. This is presumed to be correct.

1464 hits for BenQ w/ 00:03:9D OUIs on WiGLE