Belkin WeMo Smart Switch (F7C027)
From TechInfoDepot
Jump to navigationJump to searchbgn (N150) | |
|---|---|
| Wemo Switch Smart Plug | |
| Homepage | |
| Support | |
| Wikipedia | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Belkin F7C027 |
| FCC ID | |
| IC ID | |
| Type |
home automation switch |
| Series |
WeMo |
| CPU1 |
Ralink RT5350F |
| CPU1 Type |
MIPS 24KEc |
| CPU1 Speed |
360 MHz |
| Flash1 Chip |
Macronix MX25L12835EMI-10G |
| Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip |
Winbond W9825G6JH-6I |
| Stock bootloader |
U-Boot |
| Expansion IF types |
none specified |
| Power |
120 VAC ~ 60 Hz, 15 A |
| Connector type |
NEMA 5-15P |
| Serial Port (UART) |
yes, internal, test points, (57600 8N1) |
| Other | |
|
Default SSID: WeMo.XXX | |
| Manuf/OEM/ODM |
Gemtek WSMR-101 |
| 3rd Party Firmware Support | |
| Retail | |
| Availability | common |
| FCC approval date | 27 December 2011 |
| (Est.) initial retail price (in USD): | $49.99 |
| UPC |
722868842355 (UPC DB, On eBay) |
| ASIN |
B00BB2MMNE  |
| Country of manuf | China |
| Radio 1 | |
| Chip1 |
Ralink RT5350F |
| Wireless interface OUI |
EC:1A:59, B4:75:0E, |
| Antenna Connector Type |
none specified |
| MIMO status |
1x1:1 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 150 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented Belkin device with specifications, see Belkin.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
"WSMR-101 V01" and "ESK-P05-3801R" is silkscreened on the board in the FCC photos.
See also: Belkin WeMo
Links of Interest
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
| This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
| OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 17.01.0
Current supported version: 22.03.7
Comment:
Wifi AC relay, wallwart size
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 17.01.0
Current supported version: 22.03.7
Comment:
Wifi AC relay, wallwart size
Please insert instructions here
Categories:
- Belkin
- Embedded system/home automation switch
- Embedded System Ralink
- Embedded System RT5350F
- Ralink
- Embedded System MIPS 24KEc
- Embedded System
- Manuf Gemtek
- OpenWrt Was Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Internet of things
- English Documentation
