Belkin WeMo Light Switch (F7C030)
From TechInfoDepot
Jump to navigationJump to searchbgn (N150) | |
---|---|
WeMo light switch | |
![]() | |
Wikipedia | |
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Belkin F7C030 |
FCC ID | |
IC ID | |
Type |
home automation switch |
Series |
WeMo |
CPU1 ![]() |
Ralink RT5350 |
CPU1 Type |
MIPS 24KEc |
CPU1 Speed |
360 MHz |
Flash1 Chip |
Macronix MX25L12835EMI-10G |
Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
RAM1 Chip |
EtronTech EM63A165TS-6IG |
802dot11 OUI: none specified | |
Stock bootloader |
U-Boot |
Expansion IF types |
none specified |
Power |
120 VAC ~ 60 Hz, ? A |
Connector type |
none, direct connection |
Serial Port (UART) |
yes, internal, 4-pin header, unpopulated |
Other | |
Default SSID: WeMo.Light.XXX | |
Manuf/OEM/ODM |
Gemtek WSMR-106 |
3rd Party Firmware Support | |
Retail | |
FCC approval date | 07 May 2013 |
(Est.) initial retail price (in USD): | $49.99 |
UPC |
722868979785 (UPC DB, On eBay) |
ASIN |
B00DGEGJ02 ![]() |
Country of manuf | China |
Radio 1 | |
Chip1 |
Ralink RT5350 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
U.FL |
MIMO status |
1x1:1 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 150 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented Belkin device with specifications, see Belkin.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
"WSMR-106_V01" and "ES0-S07-7901R RoHS" appears to be silkscreened on the SoC board in the FCC photos.
See also: Belkin WeMo
Links of Interest
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
![]() | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
![]() | This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
![]() | OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: unknown
Current supported version: unknown
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: unknown
Current supported version: unknown
Please insert instructions here
Categories:
- Belkin
- Embedded system/home automation switch
- Embedded System Ralink
- Embedded System RT5350
- Ralink
- Embedded System MIPS 24KEc
- Embedded System
- Manuf Gemtek
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation
- Internet of things