Belkin F9K1115 v2
abgn+ac (AC1750) | |||||
---|---|---|---|---|---|
AC1750 DB Wi-Fi Dual-Band AC+ Gigabit Router | |||||
Wikipedia | |||||
WikiDevi.wi-cat.ru | |||||
3rd Party Firmware | |||||
dd-wrt |
Status Unknown | ||||
OpenWrt | |||||
Tomato any flavor |
Incompatible | ||||
Gargoyle |
Status Unknown | ||||
Platform | |||||
Brand • Model • Rev |
Belkin F9K1115 v2 | ||||
FCC ID | |||||
IC ID | |||||
Type |
wireless router | ||||
CPU1 |
Qualcomm Atheros QCA9558 | ||||
CPU1 Type |
MIPS 74Kc | ||||
CPU1 Speed |
720 MHz | ||||
Flash1 Chip |
Macronix Model? | ||||
Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||
RAM1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> | ||||
RAM1 Chip |
Winbond W9751G6KB-25 | ||||
ETH chip1 |
Qualcomm Atheros QCA9558 | ||||
Switch |
Qualcomm Atheros QCA8337 | ||||
Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN | ||||
Wired Standard |
IEEE 802.3i/3u/3ab | ||||
802dot11 OUI: none specified | |||||
Stock bootloader |
U-Boot | ||||
Expansion IF types |
USB 3.0, Mini PCIe (oversized) | ||||
Mini PCIe slots |
1 | ||||
USB ports |
2 | ||||
USB Hub Compatible |
Untested | ||||
Power |
12 VDC, 2.5 A | ||||
Connector type |
barrel | ||||
Serial Port (UART) |
yes, 3.3, (115200 8N1) | ||||
Additional chips | |||||
Other | |||||
Default IP address: 192.168.2.1 | |||||
Manuf/OEM/ODM | |||||
3rd Party Firmware Support | |||||
Retail | |||||
Availability | End of Life | ||||
End of Life date | 2016 | ||||
FCC approval date | 02 August 2013 | ||||
UPC |
722868925539 (UPC DB, On eBay) | ||||
ASIN | B004U6NS5Y | ||||
Country of manuf | China | ||||
Radio 1 | |||||
Chip1 |
Qualcomm Atheros QCA9558 | ||||
Wireless interface OUI |
none specified | ||||
Antenna Connector Type |
U.FL | ||||
MIMO status |
3x3:3 | ||||
Wireless Standard |
IEEE 802.11b/g/n | ||||
802.11n |
up to 450 Mbps | ||||
802.11g |
up to 54 Mbps | ||||
802.11b |
up to 11 Mbps | ||||
WiFi Operating Frequency |
2.4 GHz | ||||
Radio 2 | |||||
Radio2 module | |||||
Radio2 module IF |
Mini PCIe (oversized) | ||||
Chip1 |
Qualcomm Atheros QCA9880-2R4E | ||||
Wireless interface OUI |
none specified | ||||
Antenna Connector Type |
U.FL | ||||
MIMO status |
3x3:3 | ||||
Wireless Standard |
IEEE 802.11a/n/ac | ||||
802.11ac |
up to 1300 Mbps | ||||
802.11n |
up to 450 Mbps | ||||
802.11a |
up to 54 Mbps | ||||
WiFi Operating Frequency |
5 GHz | ||||
|
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented Belkin device with specifications, see Belkin.
Overview
There does not appear to be a v1 version of this model. Hooray.
The F9K1119v1 AC1600 shares the same FCC ID as this model, which the FCC Application lists as AC1750 DB Wi-Fi Dual-Band AC + Gigabit Router, AC1600 DB Wi-Fi Dual-Band AC + Gigabit Router
Per the FCC photos...
- The WiSoC used is a QCA9558-AT4A.
- The QCA9880 (QCA9880-2R4E / QCA9880v2 [???]) wireless module appears to be using three Skyworks SE5003L1 / 5003L1 5 GHz Power Amplifier modules.
- "EW-7933MAC V1.0A" and "P/C:C71-011" is silkscreened on the back of the wireless module, implying that the module is an Edimax EW-7933MAC.
- There is also a manuf. P/N of some sort on the board.. but it is not readable in the provided photos. I will, however, presume (erroneously?) that Edimax is indeed manufacturing this device (EW-7933AC ??)...
- An EtronTech EJ168A USB 3.0 controller is on-board.. providing the device with two USB 3.0 ports.
- The GbE Switch is a QCA8337-AL3C.
Per additional FCC docs...
- The device is using Airgain PCB antennas.
- 1x N2420S-T10-B100S2 (3.4 dBi gain @ 2.4 GHz)
- 1x N2420S-T10-W50S2 (3.9 dBi gain @ 2.4 GHz)
- 1x N2420S-T10-G190S2 (4.4 dBi gain @ 2.4 GHz)
- 1x N5x20B-T1-B150U (5.8 dBi gain @ 5 GHz)
- 1x N5x20B-T-G65U (5.3 dBi gain @ 5 GHz)
- 1x N5x20B-T-W85U (5.3 dBi gain @ 5 GHz)
- A Macronix Serial Flash is on the back of the board.
The default SSID patterns are belkin.{last three LAN MAC hex digits} and the 5 GHz radio could be suffixed with .5GHz or .media
The power adapter shown in the FCC external photos is a (Belkin branded) DVE DSA-30PFB-12 FUS 120250 (100-240VAC ~ 50/60 Hz, 0.8A -> 12VDC, 2.5A).
Wi-Fi Certified : WFA19590 (as of 08/05/2013)
Links of Interest
- Manual (may not last at this URL or at this time, currently up as of 08/03/2013
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt Wiki
OpenWrt Target: ar71xx-ath79
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 15.05
Current supported version: 23.05.5
Please insert instructions here
- Belkin
- Embedded system/wireless router
- Embedded System Qualcomm Atheros
- Embedded System QCA9558
- Qualcomm Atheros
- Embedded System MIPS 74Kc
- Embedded System
- Embedded System QCA8337
- Manuf Edimax
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System QCA9880-2R4E
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Wi-Fi Certified
- English Documentation