Belkin F9K1109 v1
abgn (AN750) | |
---|---|
N750 DB WiFi Router | |
Wikipedia | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Belkin F9K1109 v1 |
FCC ID |
none specified |
Type |
wireless router |
CPU1 |
Ralink RT3883 |
CPU1 Type |
MIPS 74Kc |
CPU1 Speed |
500 MHz |
Flash1 Chip |
Macronix MX25L6405D |
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (SPI) |
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (DDR2) |
RAM1 Chip |
Winbond W9751G6JB-25 |
ETH chip1 |
Ralink RT3883 |
Switch |
Realtek RTL8367R-VB |
Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
802dot11 OUI: none specified | |
Stock bootloader |
U-Boot 3.5.2.0 |
Expansion IF types |
USB 2.0 |
USB ports |
2 |
USB Hub Compatible |
Untested |
Power |
12 VDC, 2 A |
Serial Port (UART) |
yes, (57600, 8N1) |
Other | |
| |
3rd Party Firmware Support | |
Retail | |
Availability | End of Life |
Radio 1 | |
Chip1 |
Ralink RT3092 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio 2 | |
Chip1 |
Ralink RT3883 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
3x3:3 |
Wireless Standard |
IEEE 802.11a/n |
802.11n |
up to 450 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented Belkin device with specifications, see Belkin.
Overview
The F9K1109v1 is one of Belkin's N750 dual band N+ routers. It is based on the Ralink RT3883 SoC platform.
Links of Interest
- Belkin F9K1109 v1:
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: rt3883
OpenWrt Package architecture: mipsel_74kc
Support started version: 19.07.0
Current supported version: 23.05.5
Please insert instructions here
JTAG-Serial Info
Serial
Serial Pinouts
The 4 pin header is by “J12” on the board. As usual do not connect the power/volt connection.
GND RX TX 3.3V J12 marking on board
- Belkin
- Embedded system/wireless router
- Embedded System Ralink
- Embedded System RT3883
- Ralink
- Embedded System MIPS 74Kc
- Embedded System
- Embedded System Realtek
- Embedded System RTL8367R-VB
- Realtek
- OpenWrt Supported
- Embedded System RT3092
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System IEEE 802.11a/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation