BeagleY-AI
bgn+ax (AX287) | |
---|---|
Open-source Development Platform | |
Homepage | |
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt |
Status Unknown |
Tomato any flavor |
Incompatible |
Platform | |
Brand • Model • Rev |
BeagleBoard.org BeagleY-AI Rev A |
FCC ID | |
IC ID | |
Type |
single-board computer |
CPU1 |
Texas Instruments AM67A |
CPU1 Speed |
1.4 GHz ( 4 cores ) |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> (MicroSD) |
RAM1 Size |
4 GiB 4,096 MiB <br />4,294,967,296 B <br />33,554,432 Kib <br />4,194,304 KiB <br />32,768 Mib <br /> |
RAM1 Chip |
Kingston B3221PM3BDGUI-U |
ETH chip1 |
Texas Instruments AM67A |
ETH chip2 |
Texas Instruments DP83867CR |
Ethernet Port Count |
1-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
Stock bootloader |
U-Boot 2023.04 |
Stock FW OS |
Linux 6.1.83 Debian 12 |
Expansion IF types |
PCIe x1, USB 3.1 (Gen1), USB 2.0 (OTG), MicroSD Card slot, Micro HDMI |
PCIe slots | |
USB ports |
5 |
SD/MMC Slots |
1 |
HDMI |
1 |
USB Hub Compatible |
Untested |
Power |
5 VDC, 5 A |
Connector type |
USB (Type-C) Female |
Serial Port (UART) |
yes, 3-pin header, populated, (115200 8N1) |
JTAG Port |
yes, 10-pad header |
Flags: Bluetooth 5.4 LE, MicroSD Card slot, Micro HDMI, MIPI CSI/DSI, MIPI CSI, OLDI, RTC, PoE Expansion header, fan header, SPI, I2C, PWM, UART, GPIO | |
Additional chips | |
Other | |
Default IP address: acquired via DHCP | |
Manuf/OEM/ODM | |
Retail | |
FCC approval date | 07 May 2024 |
(Est.) release date | April 2024 |
(Est.) initial retail price (in USD): | $70 |
UPC |
640265311062 (UPC DB, On eBay) |
Country of manuf | China |
Radio 1 | |
Radio1 module | |
Radio1 module IF |
SDIO/UART (module) |
Chip1 |
Texas Instruments CC3301 |
Wireless interface OUI |
10:CA:BF |
Antenna Connector Type |
U.FL |
MIMO status |
1x1:1 |
Wireless Standard |
IEEE 802.11b/g/n/ax |
802.11ax |
up to 287 Mbps |
802.11n |
up to 150 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.
Overview
Beagleboard logo, and "BeagleY-AI Rev A" are silkscreened on board top.
Device PCIe connector, RTC battery, UART, fan connector and PoE
- connector are compatible with RPF_Raspberry_Pi_5_8GB accessories.
Hardware specification
- CPU: Texas Instruments AM67A @1.4GHz
- SoC: Quad-core ARM (Cortex-A53)
- MCU: ARM (Cortex-R5) @800MHz
- DSP/AI:Dual general-purpose C7x DSP w/MMA 4 TOPS
- GPU: Imagination BXS-4-64
- OpenGL ES 3.2, Vulkan 1.2,
- H.265 (HEVC) (up to 4Kp60 decode),
- H.264 (up to 1080p60 decode, 1080p30 encode)
- Storage: TF card (max.512GB)/MMC card slot
- Memory: 4GB (LPDDR4) SDRAM
- Wi-Fi: Texas Instruments CC3301 (1T1R)
- SDIO: Wi-Fi 6 2.4GHz 802.11ax, UART/PCM: BT 5.4 LE
- Network: 1x 1GbE port
- USB: 4x USB 3.0 (Host), 1x USB 2.0 (Type-C) OTG ports
- PCIe: PCIe (Gen3) x1 via ribbon cable
- GPIO: 1x 40-pin headers
- Power Source: 5V via USB (Type-C) port or optional PoE Hat
Links of Interest
- BeagleBoard.org
- Embedded system/single-board computer
- Embedded System Texas Instruments
- Embedded System AM67A
- Texas Instruments
- Embedded System DP83867CR
- Manuf SeeedStudio
- Embedded System CC3301
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Embedded System
- English Documentation