Baicells EP3011

abgn+ac (AC1200)
AC1200 Wireless PoE Router
WikiDevi.wi-cat.ru	Baicells EP3011
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Baicells EP3011
FCC ID	2AG32EP3011
IC ID	20982-EP3011
Type	wireless router
CPU1	MediaTek MT7621AT
CPU1 Type	MIPS 1004Kc
CPU1 Speed	880 MHz ( 2 cores ) 16-bit
Flash1 Chip	Macronix MX25L25635FMI-10G
Flash1 Size	32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Size	128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip	Nanya NT5CC64M16GP-DI
ETH chip1	MediaTek MT7621AT
Switch	MediaTek MT7621AT
Ethernet Port Count	1-1GbE-WAN 2-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Expansion IF types	none specified
PoE	non-standard (otherwise unspecified)
Power	24 VDC, 1 A
Connector type	barrel
Serial Port (UART)	yes, 4-pin header
Other
Default IP address: 192.168.150.1 the IP 192.168.150.1 is used by 2 additional devices of which 0 are Baicells devices Default login user: admin Default login password: admin admin:admin credentials used by 1343 additional devices of which 0 are Baicells devices
Retail
FCC approval date	26 October 2018
Country of manuf	China
Radio 1
Chip1	MediaTek MT7612EN
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11a/n/ac
802.11ac	up to 867 Mbps
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
Radio 2
Chip1	MediaTek MT7603EN
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

• 867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.),

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AC1200 class

Overview

• LTE ODU support (EG7035E/L, EG7010A/C)

MicroSD Card slot (unsoldered)