BCM BR-N150
From TechInfoDepot
Jump to navigationJump to searchbgn (N150) | |
|---|---|
| BR-N150 11n Mobile Router | |
| WikiDevi.wi-cat.ru | |
| 3rd Party Firmware | |
| dd-wrt | |
| OpenWrt |
Incompatible |
| Tomato any flavor |
Incompatible |
| Platform | |
| Brand • Model • Rev |
BCM BR-N150 |
| FCC ID |
none specified |
| Type |
3G mobile router |
| CPU1 |
Ralink RT3050 |
| CPU1 Type |
MIPS 24KEc |
| CPU1 Speed |
320 MHz 16-bit |
| Flash1 Chip |
Macronix MX29LV320DBTI-70G |
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip |
ESMT M12L2561616A-6T |
| ETH chip1 |
Ralink RT3050 |
| Ethernet Port Count |
1-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u |
| Stock bootloader |
U-Boot |
| Stock FW OS |
Linux 2.6.21 |
| Expansion IF types |
USB 2.0 |
| USB ports |
1 |
| USB Hub Compatible |
Untested |
| Power |
5 VDC, 1.44 A |
| Connector type |
barrel |
|
Additional chips | |
| Other | |
|
Default SSID: BRN150 | |
| Radio 1 | |
| Chip1 |
Ralink RT3050 |
| Wireless interface OUI |
00:02:6B |
| Antenna Connector Type |
none specified |
| MIMO status |
1x1:1 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 150 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented BCM device with specifications, see BCM.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
Additional specifications, per BCM, follow...
- Dimensions: 136 mm (H) x 92 mm (W) x 24 mm (D)
- Weight: 130 g
"GP200 REV:1.0" and "P/N:66110-002" is silkscreened on the board.
- There is a (USB only) Mini PCIe slot and a SIM Card slot on the unit used to populate this entry.
- The device is using Sanyo and TEAPO capacitors.
The default SSIDs used by the device are BRN150 and BRN150-1.
The power adapter included with the device is a Touch Electronic Co., Ltd. SA01-7US05R-A (100-240VAC ~ 50-60Hz, 0.3A -> 5VDC, 1.44A).
Links of Interest
JTAG-Serial Info
Serial
Info derived from
| boot log |
|---|
U-Boot 1.1.3 (Nov 10 2009 - 14:30:22)
Board: Ralink APSoC DRAM: 32 MB
relocate_code Pointer at: 81fac000
config usb-otg
flash_protect ON: from 0xBF000000 to 0xBF0201A7
protect on 0
protect on 1
protect on 2
protect on 3
protect on 4
protect on 5
protect on 6
protect on 7
protect on 8
protect on 9
flash_protect ON: from 0xBF030000 to 0xBF03FFFF
protect on 10
============================================
Bcmcom UBoot Version : 3.2.1-2
--------------------------------------------
ASIC 3052_MP2 (Port5<->Phy)
DRAM COMPONENT: 256Mbits
DRAM BUS: 16BIT
Total memory: 32 MBytes
Date:Nov 10 2009 Time:14:30:22
============================================
icache: sets:128, ways:4, linesz:32 ,total:16384
dcache: sets:128, ways:4, linesz:32 ,total:16384
##### The CPU freq = 320 MHZ ####
SDRAM bus set to 16 bit
SDRAM size =32 Mbytes
Please choose the operation:
1: Load system code to SDRAM via TFTP.
2: Load system code then write to Flash via TFTP.
3: Boot system code via Flash (default).
4: Entr boot command line interface.
9: Load Boot Loader code then write to Flash via TFTP. 0
3: System Boot system code via Flash.
## Booting image at bf050000 ...
Image Name: Linux Kernel Image
Created: 2009-11-12 6:03:34 UTC
System Control Status = 0x03400000
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 3284513 Bytes = 3.1 MB
Load Address: 80000000
Entry Point: 8030b000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 8030b000) ...
## Giving linux memsize in MB, 32
Starting kernel ...
LINUX started...
THIS IS ASIC
Linux version 2.6.21 (root@BL3100) (gcc version 3.4.2) #1 Thu Nov 12 14:03:08 CST 2009
The CPU feqenuce set to 320 MHz
CPU revision is: 0001964c
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Built 1 zonelists. Total pages: 8128
Kernel command line: console=ttyS1,57600n8 root=/dev/ram0
Primary instruction cache 16kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 16kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
cause = 90800030, status = 1100ff00
PID hash table entries: 128 (order: 7, 512 bytes)
calculating r4koff... 00138800(1280000)
CPU frequency 320.00 MHz
Using 160.000 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 26948k/32768k available (2529k kernel code, 5820k reserved, 583k data, 2300k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
detected lzma initramfs
detected lzma initramfs
initramfs: LZMA lc=3,lp=0,pb=2,dictSize=1048576,origSize=9856512
LZMA initramfs by Ming-Ching Tiew <mctiew@yahoo.com>.......................................................................................................................................................Load RT2880 Timer Module(Wdg/Soft)
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
fuse init (API version 7.8)
io scheduler noop registered (default)
FLASH_API: MAN_ID=C2 DEV_ID=22A8 SIZE=4MB
Ralink gpio driver initialized
HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0xb0000500 (irq = 37) is a 16550A
serial8250: ttyS1 at I/O 0xb0000c00 (irq = 12) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
rdm_major = 254
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
ralink flash device: 0x1000000 at 0x1f000000
Ralink SoC physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 4 MTD partitions on "Ralink SoC physically mapped flash":
0x00000000-0x00030000 : "Bootloader"
0x00030000-0x00040000 : "Config"
0x00040000-0x00050000 : "Factory"
0x00050000-0x01000000 : "Kernel"
mtd: partition "Kernel" extends beyond the end of device "Ralink SoC physically mapped flash" -- size truncated to 0x3b0000
block2mtd: version $Revision: 1.1.1.1 $
drivers/usb/spumdm/spumdm.c: spumdm driver control init
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (256 buckets, 2048 max)
ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Restricted Cone
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
brn150_wwan driver control init
NET: Registered protocol family 1
NET: Registered protocol family 10
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
GDMA1_MAC_ADRH -- : 0x00000000
GDMA1_MAC_ADRL -- : 0x00000000
Ralink APSoC Ethernet Driver Initilization. v2.00 256 rx/tx descriptors allocated, mtu = 1500!
GDMA1_MAC_ADRH -- : 0x00000002
GDMA1_MAC_ADRL -- : 0x6b0a763c
PROC INIT OK!
Freeing unused kernel memory: 2300k freed
init started: BusyBox v1.12.1 (2009-11-12 13:46:41 CST)
startAlgorithmics/MIPS FPU Emulator v1.5
ing pid 679, tty '': '/etc_ro/rcS'
devpts: called with bogus options
Check TestCode Mode ...
Welcome to
B C M - [ B R N - 1 5 0 ] L I N U X
=For further information check:
http://www.bcmcom.com.tw/=
BCM/BRN150-STD Version CN.00.00-T10 -- Thu, 12 Nov 2009 13:56:19 +0800
XG-Route state machine init ...
Start gpio-buttom probe ...
internet.sh
starting pid 745, tty '/dev/ttyS1': '/bin/sh'
BusyBox v1.12.1 (2009-11-12 13:46:41 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
# @@@@@@@@ [ Check USB XG Modem ] @@@@@@@@
@@@@@@@@ [ USB XG Modem .... No ] @@@@@@@@
@@@@@@@@ [ Check USB XG Modem ] @@@@@@@@
@@@@@@@@ [ USB XG Modem .... No ] @@@@@@@@
Password for 'admin' changed
lm: no version for "struct_module" found: kernel tainted.
dwc_otg: version 2.72a 24-JUN-2008
DWC_otg: Core Release: 2.66a
DWC_otg: Periodic Transfer Interrupt Enhancement - disabled
DWC_otg: Multiprocessor Interrupt Enhancement - disabled
DWC_otg: Using DMA mode
DWC_otg: Device using Buffer DMA mode
dwc_otg lm0: DWC OTG Controller
dwc_otg lm0: new USB bus registered, assigned bus number 1
dwc_otg lm0: irq 18, io mem 0x00000000
DWC_otg: Init: Port Power? op_state=1
DWC_otg: Init: Power Port (0)
usb usb1: Product: DWC OTG Controller
usb usb1: Manufacturer: Linux 2.6.21 dwc_otg_hcd
usb usb1: SerialNumber: lm0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
insmod: bridge.ko: module not found
insmod: mii.ko: module not found
insmod: raeth.ko: module not found
phy_tx_ring = 0x01441000, tx_ring = 0xa1441000
phy_rx_ring = 0x00000000, rx_ring = 0x00000000
RT305x_ESW: Link Status Changed
CDMA_CSG_CFG = 81000007
GDMA1_FWD_CFG = 710000
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
rmmod: rt2860v2_ap: No such file or directory
rmmod: rt2860v2_sta: No such file or directory
Commit crc = 86fcbbe1
rt2860v2_ap: module license 'unspecified' taints kernel.
=== pAd = c003a000, size = 494240 ===
<-- RTMPAllocAdapterBlock, Status=0
@@@@@@@@ [ Check USB XG Modem ] @@@@@@@@
@@@@@@@@ [ USB XG Modem .... No ] @@@@@@@@
rmmod: nf_nat_pptp: No such file or directory
rmmod: nf_conntrack_pptp: No such file or directory
rmmod: nf_nat_proto_gre: No such file or directory
rmmod: nf_conntrack_proto_gre: No such file or directory
RX DESC a144c000 size = 2048
<-- RTMPAllocTxRxRingMemory, Status=0
Key1Str is Invalid key length(0) or Type(0)
Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 9
2. Phy Mode = 9
3. Phy Mode = 9
MCS Set = ff 00 00 00 01
Main bssid = 00:02:6b:0a:76:3c
<==== rt28xx_init, Status=0
0x1300 = 00064380
insmod: 8021q.ko: module not found
eth2.2: Setting MAC address to 00 02 6b 0a 76 3c.
VLAN (eth2.2): Underlying device (eth2) has same MAC, not checking promiscious mode.
ifconfig: ioctl 0x8913 failed: No such device
brctl: bridge br0: No such device or address
##### config RT3052 vlan partition (WLLLL) #####
switch reg write offset=14, value=405555
switch reg write offset=50, value=2001
switch reg write offset=98, value=7f3f
switch reg write offset=e4, value=3f
switch reg write offset=40, value=1002
switch reg write offset=44, value=1001
switch reg write offset=48, value=1001
switch reg write offset=70, value=ffff417e
device ra0 entered promiscuous mode
eth2.1: dev_set_promiscuity(master, 1)
device eth2 entered promiscuous mode
device eth2.1 entered promiscuous mode
device ra1 entered promiscuous mode
@@@@@@@@ [ Check USB XG Modem ] @@@@@@@@
@@@@@@@@ [ USB XG Modem .... No ] @@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@ Port to LAN @@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Nofound usb-modem device ...
@@@@@@@@ [ Check USB XG Modem ] @@@@@@@@
XGSTMC LEFT:[] STATUS:[profile] EVENTS:[umdm_init_driver] ARG:[]
@@@@@@@@ [ USB XG Modem .... No ] @@@@@@@@
insmod: cannot insert '/lib/modules/2.6.21/kernel/drivers/usb/dwc_otg/dwc_otg.ko': invalid parameters
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
<XG AD-Hold> Init [umdm_wait_device] Waitting [5] ...
usbcore: registered new interface driver hso
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
Buffer Param: [init 5 umdm_wait_device xgevents umdm_nofound;]
Sub Param: [init 5 umdm_wait_device xgevents umdm_nofound]
Add new client 4464896
Wdt StartID:4464896 timeout:5 group:umdm_wait_device command:xgevents umdm_nofound p_counter:1
usbcore: registered new interface driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
Sub Param Events ...
br0: port 3(ra1) entering learning state
br0: port 2(eth2.1) entering learning state
br0: port 1(ra0) entering learning state
ifconfig: ioctl 0x8914 failed: Cannot assign requested address
ifconfig: ioctl 0x8914 failed: Cannot assign requested address
@@@@@@@@ [ Check USB XG Modem ] @@@@@@@@
@@@@@@@@ [ USB XG Modem .... No ] @@@@@@@@
@@@@@@@@ [ Check USB XG Modem ] @@@@@@@@
@@@@@@@@ [ USB XG Modem .... No ] @@@@@@@@
@@@@@@@@ [ Check USB XG Modem ] @@@@@@@@
@@@@@@@@ [ USB XG Modem .... No ] @@@@@@@@
@@@@@@@@ [ Check USB XG Modem ] @@@@@@@@
@@@@@@@@ [ USB XG Modem .... No ] @@@@@@@@
@@@@@@@@ [ Check USB XG Modem ] @@@@@@@@
@@@@@@@@ [ USB XG Modem .... No ] @@@@@@@@
@@@@@@@@ [ Check USB XG Modem ] @@@@@@@@
@@@@@@@@ [ USB XG Modem .... No ] @@@@@@@@
@@@@@@@@ [ Check USB XG Modem ] @@@@@@@@
@@@@@@@@ [ USB XG Modem .... No ] @@@@@@@@
@@@@@@@@ [ Check USB XG Modem ] @@@@@@@@
@@@@@@@@ [ USB XG Modem .... No ] @@@@@@@@
@@@@@@@@ [ Check USB XG Modem ] @@@@@@@@
@@@@@@@@ [ USB XG Modem .... No ] @@@@@@@@
killall: udhcpd: no process killed
Set: phy[1].reg[0] = 3900
Set: phy[2].reg[0] = 3900
<<<<<<<<<< Wdt StartID:4464896 timeout, Running: [xgevents umdm_nofound] ... ! >>>>>>>>>>
Delete client 4464896
Set: phy[3].reg[0] = 3900
XGSTMC LEFT:[] STATUS:[pf_umdm_init] EVENTS:[umdm_nofound] ARG:[]
((Error)) USB-Modem not exist ...
Set: phy[4].reg[0] = 3900
Run [group|wwan] [mode|blank] ...
Set: phy[1].reg[0] = 3100
Set: phy[2].reg[0] = 3100
Set: phy[3].reg[0] = 3100
Set: phy[4].reg[0] = 3100
ifconfig: ioctl 0x8913 failed: No such device
libupnp: using UDP SSDP_PORT = 1900
upnpd[1632]: UPnP SDK Successfully Initialized.
upnpd[1632]: Succesfully set the Web Server Root Directory.
@@@@@@@@@@ [ Dnrd Start ] @@@@@@@@@@
upnpd[1632]: IGD root device successfully registered.
@@@@@@ [ DNS Relay ] @@@@@@
@@@@@@@@ [ Check USB XG Modem ] @@@@@@@@
@@@@@@@@ [ USB XG Modem .... No ] @@@@@@@@
Notice: caching turned off
DNS Relay Daemon End
!!!!!!!![ Nat ] !!!!!!!!
ip_table: set wan_name=ppp1
project:BCM/BRN150-STD
ralink_gpio: gpio led support not built
killall rt2860apd 1>/dev/null 2>&1
Paraneter:dhcpEnabled Value:1(1)
iptables -F -t filter 1>/dev/null 2>&1
iptables -D FORWARD -j macipport_filter 1>/dev/null 2>&1
iptables -F macipport_filter 1>/dev/null 2>&1
iptables -D FORWARD -j web_filter 1>/dev/null 2>&1
iptables -F web_filter 1>/dev/null 2>&1
Paraneter:lan_ipaddr Value:192.168.1.1(11)
Paraneter:lan_netmask Value:255.255.255.0(13)
firmware:CN.00.00-T10
dhcp enable:1
lan ipaddr:192.168.1.1
lan netmask:255.255.255.0
iptables -P INPUT ACCEPT
iptables -P OUTPUT ACCEPT
iptables -P FORWARD ACCEPT
iptables -t filter -N web_filter 1>/dev/null 2>&1
iptables -t filter -N macipport_filter 1>/dev/null 2>&1
iptables -t filter -A FORWARD -j web_filter 1>/dev/null 2>&1
iptables -t filter -A FORWARD -j macipport_filter 1>/dev/null 2>&1
iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu 1>/dev/null 2>&1
iptables -A INPUT -i ppp1 -p tcp --dport 80 -j DROP
iptables -t nat -D PREROUTING -j port_forward 1>/dev/null 2>&1
iptables -t nat -F port_forward 1>/dev/null 2>&1
iptables -t nat -X port_forward 1>/dev/null 2>&1
iptables -t nat -D PREROUTING -j DMZ 1>/dev/null 2>&1
iptables -t nat -F DMZ 1>/dev/null 2>&1
iptables -t nat -X DMZ 1>/dev/null 2>&1
iptables -t nat -N port_forward 1>/dev/null 2>&1
ip_table: set wan_name=ppp1
iptables -t nat -I PREROUTING 1 -j port_forward 1>/dev/null 2>&1
ip_table: set wan_name=ppp1
iptables -t nat -N DMZ 1>/dev/null 2>&1
ip_table: set wan_name=ppp1
iptables -t nat -I PREROUTING 2 -j DMZ 1>/dev/null 2>&1
ip_table: set wan_name=ppp1
ntp.sh
ddns.sh
route delete 239.255.255.250 1>/dev/null 2>&1
killall wscd 1>/dev/null 2>&1
upnpd[1632]: Advertisements Sent. Listening for requests ...
killall -9 wscd 1>/dev/null 2>&1
iwpriv ra0 set WscConfMode=0 1>/dev/null 2>&1
killall -q klogd
killall -q syslogd
syslogd -C8 1>/dev/null 2>&1
klogd 1>/dev/null 2>&1
killall -q zebra
killall -q ripd
/bin/qos_run
tc qdisc del dev ppp0 root 1>/dev/null 2>&1
tc qdisc del dev eth2.2 root 1>/dev/null 2>&1
tc qdisc del dev eth2 root 1>/dev/null 2>&1
tc qdisc del dev ra0 root 1>/dev/null 2>&1
tc qdisc del dev apcli0 root 1>/dev/null 2>&1
iptables -t mangle -D PREROUTING -j qos_mangle_chain 1>/dev/null 2>&1
iptables -t mangle -F qos_mangle_chain 1>/dev/null 2>&1
iptables -t mangle -X qos_mangle_chain 1>/dev/null 2>&1
##### USB init #####
storage.sh admin
br0: topology change detected, propagating
br0: port 3(ra1) entering forwarding state
br0: topology change detected, propagating
br0: port 2(eth2.1) entering forwarding state
br0: topology change detected, propagating
br0: port 1(ra0) entering forwarding state
Password for 'admin' changed
storage.sh ftp
webs: Listening for HTTP requests at address 192.168.1.1
|
ps aux
# ps aux
PID USER VSZ STAT COMMAND
1 admin 1816 S init
2 admin 0 SWN [ksoftirqd/0]
3 admin 0 SW< [events/0]
4 admin 0 SW< [khelper]
5 admin 0 SW< [kthread]
30 admin 0 SW< [kblockd/0]
33 admin 0 SW< [khubd]
45 admin 0 SW< [kswapd0]
46 admin 0 SW [pdflush]
47 admin 0 SW [pdflush]
48 admin 0 SW< [aio/0]
663 admin 0 SW [mtdblockd]
714 admin 1420 S wdt-daemon
719 admin 1856 S /bin/sh /bin/xgstmc
725 admin 1364 S nvram_daemon
740 admin 1816 S goahead
745 admin 1820 S /bin/sh
748 admin 1068 S gpio_btn wait 21 -D -c 1-30 -x /bin/xgevents press_do
750 admin 1068 S gpio_btn wait 17 -D -c >30 -x /bin/xgevents press_dow
855 admin 0 SW< [dwc_otg]
932 admin 0 SW [RtmpWscTask]
1122 admin 1420 S wdt-daemon
1439 admin 1816 S udhcpd /etc/udhcpd.conf
1503 admin 1812 S cat /var/run/events
1632 admin 1908 S upnpd -f ppp1 br0
1634 admin 1908 S upnpd -f ppp1 br0
1635 admin 1908 S upnpd -f ppp1 br0
1638 admin 1908 S upnpd -f ppp1 br0
1639 admin 1908 S upnpd -f ppp1 br0
1641 admin 1908 S upnpd -f ppp1 br0
1643 admin 1908 S upnpd -f ppp1 br0
1644 admin 1908 S upnpd -f ppp1 br0
1645 admin 1908 S upnpd -f ppp1 br0
1646 admin 1908 S upnpd -f ppp1 br0
1689 admin 1596 S dnrd --cache=off --uid=1
1714 admin 1076 S ssdpd
1800 admin 1820 S syslogd -C8
1803 admin 1812 S klogd
2364 admin 1816 R ps aux
cat /proc/cmdline
# cat cmdline console=ttyS1,57600n8 root=/dev/ram0
cat /proc/mtd
# cat /proc/mtd dev: size erasesize name mtd0: 00030000 00010000 "Bootloader" mtd1: 00010000 00010000 "Config" mtd2: 00010000 00010000 "Factory" mtd3: 003b0000 00010000 "Kernel"
