Aztech WL556E

bgn (N300)
Portable Wireless-N Repeater
Homepage	Product page
WikiDevi.wi-cat.ru	Aztech WL556E
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Aztech WL556EUSA
FCC ID	I38WL556E
Type	extender
CPU1	Ralink RT3052
CPU1 Type	MIPS 24KEc
CPU1 Speed	384 MHz
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip	Zentel A3V28S40ETP-G6
ETH chip1	Ralink RT3052
Ethernet Port Count	1-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: 00:26:75 (3 E, 4 W) Ethernet OUI: 00:26:75 (3 E, 4 W)
Expansion IF types	none specified
Power	100-240 VAC ~ ? Hz, ? A
Connector type	NEMA 1-15P
Other
Default SSID: Aztech556_XXXX Default IP address: 10.0.10.254 the IP 10.0.10.254 is used by 4 additional devices of which 2 are Aztech devices Default login user: admin Default login password: admin admin:admin credentials used by 1343 additional devices of which 5 are Aztech devices
Retail
FCC approval date	12 January 2011
Country of manuf	China
Radio 1
Chip1	Ralink RT3052
Wireless interface OUI	00:26:75
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
FCC ID Best Data WR300N FN6WR300N I38WL556E

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

For a list of all currently documented Aztech device with specifications, see Aztech.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"250-614900-601A" is silkscreened on the board in the FCC photos.

Default settings are per the FCC manual.

The default SSID format seems to be Aztech556_XXXX (where XXXX seems to be the last two bytes of the wireless interface MAC [upper case letters]).

Aztech556_initAzt may also be a relevant SSID (per WiGLE)..

.. also presumed to use an 00:26:75 OUI based on WiGLE data..