Arcadyan WA9117A-AC23/Serial info

boot log (firmware 001.007.76)

Decompressing...done Found a ST compatible (Macronix) serial flash with 512 64KB blocks; total size 32MB find_nvram(256): slf_info=00f56e3c, flbase=1e000000, lim=02000000 find_nvram(293): nvh=1fff0000, off=02000000 NVRAM founded. CFE version 6.37.14.105 (r485445) based on BBP 1.0.37 for BCM947XX (32bit,SP,) Build Date: Fri Nov 7 16:05:39 CST 2014 (linghong_tan@sw1.2) Copyright (C) 2000-2008 Broadcom Corporation. Init Arena Init Devs. Boot partition size = 262144(0x40000) IMAGE_FIRST_OFFSET=262144,IMAGE_SECOND_OFFSET=16777216 DDR Clock: 533 MHz Warning: using legacy sdram_ncdl parameter to set DDR frequency. Equivalent setting in clkfreq=800,*0* will be ignored. et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.105 (r485445) CPU type 0x0: 800MHz Tot mem: 131072 KBytes CFE mem: 0x00F00000 - 0x00FE1CDC (924892) Data: 0x00F55DEC - 0x00F563EC (1536) BSS: 0x00F563F8 - 0x00F7BCDC (153828) Heap: 0x00F7BCDC - 0x00FDFCDC (409600) Stack: 0x00FDFCDC - 0x00FE1CDC (8192) Text: 0x00F00000 - 0x00F494F8 (300280) Boot: 0x00FE2000 - 0x01022000 Reloc: I:00000000 - D:00000000 Copying boot params..... DONE Bootloader version a1.3.4 Project name : WA9117 Press space bar to cancel startup... Device eth0: hwaddr 4C-09-D4-00-00-00, ipaddr 192.168.1.254, mask 255.255.255.0 gateway not set, nameserver not set Booting(0): boot -raw -z -addr=0x8000 -max=0xef8000 flash0.os: Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: .... 4600576 bytes read Entry at 0x00008000 Closing network. Starting program at 0x00008000 console [ttyS0] enabled, bootconsole disabled serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550 brd: module loaded loop: module loaded pflash: found no supported devices The first offset=40000, 2nd offset=1000000 bcmsflash: squash filesystem found at block 34 Detect first image vmlz_off=50000,rfs_off=224db8,size=2000000 boot partition is writable boot param partition is writable bcmsflash: squash filesystem found at block 286 Detect second image offset=1010000,rfs_off=11e4d70,size=2000000 Creating 8 MTD partitions on "bcmsflash": 0x000000000000-0x000000040000 : "boot" 0x000000040000-0x000000050000 : "bootp" 0x000000050000-0x000001010000 : "linux" 0x000000224db8-0x000001010000 : "rootfs" 0x000001010000-0x000001fe0000 : "linux2" 0x0000011e4d70-0x000001fe0000 : "rootfs2" 0x000001fe0000-0x000001ff0000 : "nvram2" 0x000001ff0000-0x000002000000 : "nvram" nflash: found no supported devices PPP generic driver version 2.4.2 NET: Registered protocol family 24 usbmon: debugfs is not available usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. u32 classifier Actions configured Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (1954 buckets, 7816 max) ctnetlink v0.93: registering with nfnetlink. xt_time: kernel timezone is -0000 ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012 brcmnand: found no supported devices VFS: Mounted root (squashfs filesystem) readonly on device 31:3. devtmpfs: mounted Freeing init memory: 224K /sbin/hotplug2: No such file or directory modprobe: module 'ipv6' not found modprobe: module 'bcm57xx' not found hotplug detected product: 1d6b/3/206 hotplug detected product: 1d6b/3/206 hotplug detected product: 1d6b/2/206 hotplug detected product: 1d6b/2/206 hotplug detected product: 1d6b/1/206 hotplug detected product: 1d6b/1/206 devpath=[/dev/mtd2] SHA256=[c21fdfcfc0173a1587930bb4c3148da350baa7b85b38d355d2e8aef4a753442f] Hit enter to continue...