Amped Wireless SR300

bgn (N300)
High Power Wireless-300N Smart Repeater
Homepage	Product page
WikiDevi.wi-cat.ru	Amped Wireless SR300
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Amped Wireless SR300
FCC ID	ZTT-SR300
IC ID	10233A-SR300
Type	repeater
CPU1	Realtek RTL8196C
CPU1 Type	Lexra RLX4181
CPU1 Speed	390 MHz
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	Zentel Model?
ETH chip1	Realtek RTL8196C
Switch	Realtek RTL8196C
Ethernet Port Count	5-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: F8:78:8C (1 E, 2 W) Ethernet OUI: F8:78:8C (1 E, 2 W)
Expansion IF types	none specified
Power	12 VDC, 1 A
Connector type	barrel
Other
Default SSID: Amped_Wireless Default IP address: 192.168.1.240 the IP 192.168.1.240 is used by 21 additional devices of which 11 are Amped Wireless devices
Manuf/OEM/ODM	Loopcomm
Retail
FCC approval date	18 April 2012
UPC	850214003010 (UPC DB, On eBay)
ASIN	B004NBL9WK
Country of manuf	Taiwan
Radio 1
Chip1	Realtek Model?
Wireless interface OUI	F8:78:8C
Antenna Connector Type	RP-SMA
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented Amped Wireless device with specifications, see Amped Wireless.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

The device is presumed to use RTL8196C. It probably also uses RTL8192CE. "LPC0014 REV:2.2" is silkscreened on the board.

The default WPA key is wireless. The SSID is shown as lower case on the FCC photos.. but the manual (and WiGLE data) indicates that Amped and Wireless are capitalized.

OUI appears to be F8:78:8C (should probably be F8:7B:8C, and may be in some instances)

no FCC ID on a device label with this OUI...

Links of Interest

• Datasheet
• User's Guide