Amped Wireless SR20000G

abgn (AN600)
High Power Wireless-N 600mW Gigabit Dual Band Repeater
Homepage	Product page
WikiDevi.wi-cat.ru	Amped Wireless SR20000G
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Amped Wireless SR20000G
FCC ID	ZTT-SR20000G
IC ID	10233A-SR20000G
Type	extender, repeater
CPU1	Realtek RTL8198
CPU1 Type	Lexra RLX5281
CPU1 Speed	620 MHz
Flash1 Chip	Macronix MX25L6445EM2I-10G
Flash1 Size	8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size	64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip	SK hynix H5PS5162GFR-S6C
ETH chip1	Realtek RTL8198
Switch	Realtek RTL8198
Ethernet Port Count	5-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: F8:7B:8C (8 E, 10 W) Ethernet OUI: F8:7B:8C (8 E, 10 W)
Expansion IF types	USB 2.0
USB ports	1
USB Hub Compatible	Untested
Power	12 VDC, 1 A
Connector type	barrel
Other
Default SSID: Amped_Rep_2.4GHz , Amped_Rep_5.0GHz Default IP address: 192.168.1.240 the IP 192.168.1.240 is used by 21 additional devices of which 11 are Amped Wireless devices Default login user: admin Default login password: admin admin:admin credentials used by 1342 additional devices of which 7 are Amped Wireless devices
Manuf/OEM/ODM	Loopcomm
Retail
FCC approval date	31 July 2012
UPC	850214003263 (UPC DB, On eBay)
ASIN	B0084ZYI88
Country of manuf	Taiwan
Radio 1
Chip1	Realtek RTL8192DR
Wireless interface OUI	F8:7B:8C
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11a/n
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
Radio 2
Chip1	Realtek RTL8192CE
Wireless interface OUI	F8:7B:8C
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented Amped Wireless device with specifications, see Amped Wireless.

• 300 Mbps - 2SS 5GHz 802.11n (40MHz chan.),

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AN600 class

Overview

This device shares the same hardware as the Amped Wireless R20000G.

The OEM of this device is Loopcomm. Probable F8:7B:8C OUIs

The device uses 2x SiGe SE5004L power amplifiers for the 5GHz radio and 2x SiGe SE2576L power amplifiers for the 2.4GHz radio.

Amped Wireless Extender Does Both Bands At Once - SmallNetBuilder

mhzkid's antenna kit listing for this device on eBay (w/ internal photos)

5GHz Radio: RTL8192DR

2x Skyworks (SiGe) SE5004L / 5004L 5GHz 26dBm power amplifier ICs

2.4GHz Radio: RTL8192CE

2x Skyworks (SiGe) SE2576L / 2576L 2.4GHz 26dBm power amplifier ICs

"LOO0070 REV:1.3" is silkscreened on the board.

Flash chip appears to be a 8MB Macronix MX25L6445EM2I-10G (or similar)

RAM chip appears to be a 64MB SK hynix H5PS5162GFR-S6C

Per the FCC label, the default SSIDs are Amped_Rep_2.4GHz and Amped_Rep_5.0GHz. The default WPA PSK is wireless.