Alice IAD WLAN 4421
bgn (N150) | |
|---|---|
| wireless router,dsl modem | |
| WikiDevi.wi-cat.ru | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Alice WLAN 4421 (IAD) |
| FCC ID |
none specified |
| Board ID |
141750620000J |
| Type |
wireless router, dsl modem |
| CPU1 |
Lantiq PSB 50702 |
| CPU1 Type |
MIPS 24Kec |
| CPU1 Speed |
333 MHz ( 2 cores ) |
| Flash1 Chip |
Macronix MX29LV640EBTI-70G |
| Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
Zentel A3S12D40ETP-G6 |
| ETH chip1 |
Lantiq PSB 50702 |
| Switch |
Realtek RTL8306G |
| Ethernet Port Count |
4-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u |
| Stock bootloader |
brnboot |
| Expansion IF types |
none specified |
| Power |
12 VDC, 1 A |
| Connector type |
barrel |
| Serial Port (UART) |
yes, 4-pin header |
|
Flags: ADSL2+, VoIP, FXS | |
|
Additional chips | |
| Other | |
|
Default SSID: ALICE-WLANXX | |
| Manuf/OEM/ODM | |
| 3rd Party Firmware Support | |
| Radio 1 | |
| Chip1 |
Ralink RT3060F |
| Wireless interface OUI |
00:1C:28 |
| Antenna Connector Type |
none specified |
| MIMO status |
1x1:1 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 150 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Lantiq (Intel) chipsets with specifications, see Lantiq.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
"P/N: 141750620000J R01" is silkscreened on the board.
- OEM: Arcadyan ARV7506PW11
Per the manual, the default SSID appears to be ALICE-WLANXX where XX is some number (appears to be non-hex). The OUI used may be (or include) 00:1C:28.
Links of Interest
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
On the OpenWrt Wiki
OpenWrt Target: lantiq
OpenWrt Subtarget: xway
OpenWrt Package architecture: mips_24kc
Support started version: 17.01.0
Current supported version: 23.05.5
Please insert instructions here
- Alice
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded System Lantiq
- Embedded System PSB 50702
- Lantiq
- Embedded System MIPS 24Kec
- Embedded System
- Embedded System Realtek
- Embedded System RTL8306G
- Realtek
- Manuf Arcadyan
- OpenWrt Supported
- Embedded System Ralink
- Embedded System RT3060F
- Ralink
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation
