Actiontec WPB3000

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
Powerline Wireless Network Extender
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Actiontec WPB3000
FCC ID
IC ID
Type
Powerline Access Point, Powerline Adapter
CPU1
CPU1 Type
MIPS 74Kc
CPU1 Speed
560 MHz 32-bit
CPU2
Atheros AR7420
Flash1 Chip
Brand? Model?
Flash1 Size
? MiB
RAM1 Size
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip
Winbond W9425G6JH-5
ETH chip1
Switch
Ethernet Port Count
2-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types
none specified
Power
100-240 VAC ~ 50/60 Hz, 0.15 A
Connector type
NEMA 1-15P
Other

Default SSID: Actiontec-XXXX (1 addl. devices)
Default IP address: 192.168.10.1
the IP 192.168.10.1 is used by 115 additional devices
of which 0 are Actiontec devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1331 additional devices
of which 2 are Actiontec devices

Manuf/OEM/ODM
SGE GPN2.8P61A-C
Retail
FCC approval date 17 October 2013
Country of manuf China
Radio 1
Chip1
Wireless interface OUI
none specified
Antenna Connector Type
none specified
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

For a list of all currently documented Actiontec device with specifications, see Actiontec.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"GPN2.8P61A-C_WIFI_PCB-ACTION", "REV: 1.0", "TB49193B0 B7", a lead-free logo, and a date code of 1328 appears to be silkscreened on the main (Wi-Fi / Ethernet - non-Power/PLC) board in the FCC photos.

Per the FCC photos, this device is using the following...

  • Atheros AR7420-AL3C (PLC SoC)
  • Atheros AR9341-AL1A (WiSoC)
    • at least one Airgain N2420S antenna

Default settings are from the FCC manual. They may be inaccurate.

The sample SSID shown in the manual is Actiontec. The sample label indicates the format is Actiontec-XXXX.. but that could certianly be inaccurate too..