Actiontec PK5001A

bgn (N300)
Wireless N ADSL2 Modem/Router Wireless 11n ADSL2+ Modem Gateway
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Actiontec PK5001A
FCC ID	LNQPK5001A
IC ID	LNQDL02BPK5001A
Type	wireless router, dsl modem
CPU1	Lantiq PSB 50810
CPU1 Type	MIPS 34Kc
CPU1 Speed	not specified ( 2 cores )
Flash1 Chip	ESMT F59L1G81A-25T
Flash1 Size	128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Size	64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip	ESMT W13S5121632A-5T
ETH chip1	Lantiq PSB 50810
Switch	Lantiq PSB 6970
Ethernet Port Count	4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: A0:A3:E2 Ethernet OUI: A0:A3:E2
Stock bootloader	U-Boot 2010.06 Lantiq
Stock FW OS	Linux 2.6.32.42 OpenWrt Backfire
Expansion IF types	none specified
Power	12 VDC, 1 A
Connector type	barrel
Flags: ADSL2+
Other
Default SSID: CenturyLinkXXXX (3 addl. devices) Default IP address: 192.168.0.1 the IP 192.168.0.1 is used by 799 additional devices of which 16 are Actiontec devices Default login user: admin Default login password: randomly generated admin:randomly generated credentials used by 28 additional devices of which 2 are Actiontec devices
Retail
FCC approval date	05 May 2012
Country of manuf	China
Radio 1
Chip1	Lantiq PSB 8221
Chip2	Lantiq PSB 8304
Wireless interface OUI	A0:A3:E2
Antenna Connector Type	U.FL
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Lantiq (Intel) chipsets with specifications, see Lantiq.

For a list of all currently documented Actiontec device with specifications, see Actiontec.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"Actiontec" and "06703B." is silkscreened on the board in the FCC photos.

RAM specs are per the FCC photos.. but the FCC photos also show

the device with a 128MB SK hynix H27U1G8F2BTR-BC Flash.

Actiontec's page for the PK5001A states uses 64MB Flash.

• CPU: Lantiq PSB 50810 - XWAY ARX168 (PSB 50810 EL)

The wireless chipset is Lantiq WAVE300 based.

• Lantiq PSB 8221 - XWAY WAVE300 (PSB 8221EL V1.1)
• Lantiq PSB 8304 - XWAY WAVE300 (PSB 8304 V1.1)

The FE Switch appears to be a TANTOS.

• Lantiq PSB 6970 - XWAY TANTOS (PSB 6970 HL V1.3)

Possible 40:8B:07 OUI (on a label including the device MAC

affixed to the board in the FCC internal photos)...