AboCom SWB500

b (B11)
access point
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	AboCom SWB500
FCC ID	MQ4SWB500
Type	access point
CPU1	Atmel AT76C510
Flash1 Chip	Atmel AT29LV040A-20TC
Flash1 Size	0.5 MiB524,288 B <br />4,096 Kib <br />512 KiB <br />4 Mib <br />4.882812e-4 GiB <br />
RAM1 Size	0.5 MiB524,288 B <br />4,096 Kib <br />512 KiB <br />4 Mib <br />4.882812e-4 GiB <br />
RAM1 Chip	ICSI IS61LV5128-12T
ETH chip1	Atmel AT76C510
Switch	Kendin KS8995E
Ethernet Port Count	4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	none specified
Power	5 VDC, 2.4 A
Connector type	barrel
Flags: schematics
Other
Default login user: blank Default login password: public blank:public credentials used by 15 additional devices of which 0 are AboCom devices
Retail
FCC approval date	19 February 2002
Country of manuf	Taiwan
Physical
Dimensions	160 mm x 105 mm x 27 mm
Weight	250 g
Radio 1
Chip1	Atmel AT76C510
Chip2	Intersil HFA3861B
Chip3	Intersil HFA3683A
Wireless interface OUI	none specified
Antenna Connector Type	none specified
Wireless Standard	IEEE 802.11b
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Atmel chipsets with specifications, see Atmel.
For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented Micrel (Kendin) chipsets with specifications, see Micrel.

For a list of all currently documented AboCom device with specifications, see AboCom.

• 11 Mbps - 2.4GHz 802.11b = B11 class

Overview

"M01-SW500-X10" is silkscreened on the board in the FCC photos.

The RF module is from Kai-Link.

Additional specifications, per the FCC manual, follow...

• Dimensions (LxWxH): 160 mm x 105 mm x 27 mm
• Weight: 250 g

This device is meant to be controlled with AboCom's utility.

The default password to access the device is public.