ASUS WL-600g

From TechInfoDepot
Jump to navigationJump to search
bg (G54)
802.11b/g Wireless DSL Modem Router
WL-600g.jpg
Homepage
Wikipedia
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Tomato any flavor
Incompatible
Gargoyle
Status Unknown
Platform
Brand • Model • Rev
ASUS WL-600g
FCC ID
Board ID
96348GW-10
Type
wireless router, dsl modem
CPU1
CPU1 Type
BMIPS3300
CPU1 Speed
256 MHz
Flash1 Chip
Macronix MX29LV320CTTC-90G
Flash1 Size
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip
Samsung K4S641632K-UC60
ETH chip1
Switch
Broadcom BCM5325E
Ethernet Port Count
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 00:1D:60 (1 E, 2 W)
Ethernet OUI: 00:1D:60 (1 E, 2 W)

Stock bootloader
CFE 1.0.37-0.8 (BCM96348)
Stock FW OS
Linux 2.6.8.1
Expansion IF types
USB 2.0
USB ports
2
USB Hub Compatible
Untested
Power
12 VDC, 1.25 A
Connector type
barrel
Serial Port (UART)
yes, 4-pln header
Flags:
ADSL2+

Additional chips
USB 2.0 4-port PCI Host Controller;VIA;VT6212L;VIA, VT6212L, 0716CD, 23B7034591;

Other

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1324 additional devices
of which 173 are ASUS devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1342 additional devices
of which 207 are ASUS devices

3rd Party Firmware Support
Retail
Availability End of Life
FCC approval date 11 August 2006
Country of manuf China
Radio 1
Chip1
Broadcom BCM4318
Wireless interface OUI
00:1D:60
Antenna Connector Type
RP-SMA
Wireless Standard
IEEE 802.11b/g
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio cor_rev
9

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented ASUS device with specifications, see ASUS.

• 54 Mbps - 2.4GHz 802.11g = G54 class

Links of Interest

There is a VIA VT6212L USB 2.0 controller on-board.

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: brcm63xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_mips32
Support started version: 10.03.1
Current supported version: 10.03.1
Unsupported Functions:
DSL modem

Please insert instructions here

JTAG-Serial Info

Serial

Serial info
boot log • >> 
CFE version 1.0.37-0.8 for BCM96348 (32bit,SP,BE)
Build Date: є@  2єК 20 18:37:34 CST 2006 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena.
Initializing Devices.
CPU type 0x29107: 256MHz, Bus: 128MHz, Ref: 32MHz

Total memory used by CFE:  0x80401000 - 0x805246F0 (1193712)
Initialized Data:          0x8041C680 - 0x8041E080 (6656)
BSS Area:                  0x8041E080 - 0x804226F0 (18032)
Local Heap:                0x804226F0 - 0x805226F0 (1048576)
Stack Area:                0x805226F0 - 0x805246F0 (8192)
Text (code) segment:       0x80401000 - 0x8041C67C (112252)
Boot area (physical):      0x00525000 - 0x00565000
Relocation Factor:         I:00000000 - D:00000000

Board IP address                : 192.168.1.1:ffffff00
Host IP address                 : 192.168.1.100
Gateway IP address              :
Run from flash/host (f/h)       : f
Default host run file name      : vmlinux
Default host flash file name    : bcm963xx_fs_kernel
Boot delay (0-9 seconds)        : 1
Board Id Name                   : 96348GW-10
Psi size in KB                  : 24
Number of MAC Addresses (1-32)  : 11
Base MAC Address                : 00:1d:60:49:7c:34
Ethernet PHY Type               : Internal
Memory size in MB               : 16

*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
GPIOio_PIN_HIGH is Off
Code Address: 0x80010000, Entry Address: 0x801f1018
Decompression OK!
Entry at 0x801f1018
Closing network.
Starting program at 0x801f1018
Linux version 2.6.8.1 (root@myubuntu) (gcc version 3.4.2) #1 Tue Jun 2 23:23:34 CEST 2009
Total Flash size: 4096K with 71 sectors
96348GW-10 prom init
CPU revision is: 00029107
mpi: No Card is in the PCMCIA slot
Determined physical RAM map:
 memory: 00fa0000 @ 00000000 (usable)
On node 0 totalpages: 4000
  DMA zone: 4000 pages, LIFO batch:1
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=31:0 ro noinitrd
brcm mips: enabling icache and dcache...
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB 2-way, linesize 16 bytes.
PID hash table entries: 64 (order 6: 512 bytes)
Using 128.000 MHz high precision timer.
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 13680k/16000k available (1654k kernel code, 2300k reserved, 265k data, 76k init, 0k highmem)
Calibrating delay loop... 255.59 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction...  unavailable.
NET: Registered protocol family 16
Can't analyze prologue code at 801ac2c4
usbcore: registered new driver usbfs
usbcore: registered new driver hub
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Using noop io scheduler
bcm963xx_mtd driver v1.0
brcmboard: brcm_board_init entry
bcm963xx_serial driver v2.0
u32 classifier
    OLD policer on
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 1024)
NET: Registered protocol family 1
NET: Registered protocol family 17
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 76k freed
init started:  BusyBox v1.00 (2009.06.02-21:26+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5

BusyBox v1.00 (2009.06.02-21:26+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.

Loading drivers and kernel modules...

Asus mknod Init
mknod: /dev/ptmx: File exists
Asus mknod finish (Roly)
Using /lib/modules/2.6.8.1/extra/atmapi.ko
atmapi: module license 'Proprietary' taints kernel.
Using /lib/modules/2.6.8.1/extra/blaadd.ko
blaadd: blaa_detect entry
Using /lib/modules/2.6.8.1/extra/adsldd.ko
adsl: adsl_init entry
Using /lib/modules/2.6.8.1/extra/bcmprocfs.ko
Broadcom BCMPROCFS v1.0 initialized
Using /lib/modules/2.6.8.1/extra/bcm_enet.ko
Broadcom BCM6348B0 Ethernet Network Device v0.3 Jan 19 2009 15:16:48
Config Ethernet Switch Through MDIO Sseudo PHY Interface
eth0: MAC Address: 00:1D:60:49:7C:34
Using /lib/modules/2.6.8.1/extra/wl.ko
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
wl: srom not detected, using main memory mapped srom info (wombo board)
wl0: wlc_attach: using main board MAC address base in NVRAM (wombo board)
wl0 MAC Address: 00:1D:60:49:7C:34
dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
wl0: Broadcom BCM4318 802.11 Wireless Controller 3.91.41.0
cfm init()
xmlEndQoSobj is not xmlstate.verify
BcmAdsl_Initialize=0xC005D3F8, g_pFnNotifyCallback=0xC0076214
AnnexCParam=0x7FFF7E08 AnnexAParam=0x00000980 adsl2=0x00000000
pSdramPHY=0xA0FFFFF8, 0xCF6CCEFE 0xCCFFE7EF
AdslCoreHwReset: AdslOemDataAddr = 0xA0FFBB64
AnnexCParam=0x7FFF7E08 AnnexAParam=0x00000980 adsl2=0x00000000
dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered

==>   Bcm963xx Software Version: 3.02L.01.A2pB023k.d20e   <==

device eth0 entered promiscuous mode
br0: port 1(eth0) entering learning state
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
Setting country code "NL"
device wl0 entered promiscuous mode
br0: port 2(wl0) entering learning state
br0: topology change detected, propagating
br0: port 2(wl0) entering forwarding state
infosvr start!!!
xmlEndQoSobj is not xmlstate.verify
watchdog init testing!!!!!!!!!
xmlEndQoSobj is not xmlstate.verify
uhci_hcd: falsely claims to have parameter debug
USB Universal Host Controller Interface driver v2.2
PCI: Enabling device 0000:00:07.0 (0000 -> 0001)
uhci_hcd 0000:00:07.0: UHCI Host Controller
uhci_hcd 0000:00:07.0: irq 32, io base 0c000000
uhci_hcd 0000:00:07.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Enabling device 0000:00:07.1 (0000 -> 0001)
uhci_hcd 0000:00:07.1: UHCI Host Controller
br0: port 2(wl0) entering disabled state
Setting country code "NL"
br0: port 2(wl0) entering learning state
br0: topology change detected, propagating
br0: port 2(wl0) entering forwarding state
uhci_hcd 0000:00:07.1: irq 32, io base 0c000020
uhci_hcd 0000:00:07.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Enabling device 0000:00:07.2 (0000 -> 0002)
ehci_hcd 0000:00:07.2: EHCI Host Controller
capbase:::1000010
capbase:::1000010
ehci_hcd 0000:00:07.2: irq 32, pci mem a8010800
ehci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:07.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usblp: falsely claims to have parameter proto_bias
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
br0: port 2(wl0) entering disabled state
br0: port 2(wl0) entering learning state
br0: topology change detected, propagating
br0: port 2(wl0) entering forwarding state
br0: port 2(wl0) entering disabled state
br0: port 2(wl0) entering learning state
br0: topology change detected, propagating
br0: port 2(wl0) entering forwarding state
br0: port 2(wl0) entering disabled state
br0: port 2(wl0) entering learning state
br0: topology change detected, propagating
br0: port 2(wl0) entering forwarding state
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
br0: port 1(eth0) entering disabled state
device wl0 is already a member of a bridge; can't enslave it to bridge br0.
device wds0.49153 entered promiscuous mode
br0: port 3(wds0.49153) entering learning state
br0: topology change detected, propagating
br0: port 3(wds0.49153) entering forwarding state
/var/harddisk/asus/startup: not found

Login:
Retrieved from "https://techinfodepot.shoutwiki.com/w/index.php?title=ASUS_WL-600g&oldid=399005"