=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.09.28 17:29:02 =~=~=~=~=~=~=~=~=~=~=~=
Quantenna Mini U-Boot
Version: v36.5.0.7 Built: 4жњ€ 21 2014 at 15:19:42
Boot reached stage 64
Boot reached stage 65
QTN-EMAC
Boot reached stage 80
1G-FD
Using QTN-EMAC device
TFTP from server 1.1.1.1; our IP address is 1.1.1.2
Filename 'u-boot.bin'.
Load address: 0x88000000
Loading: T T T T
Retry count exceeded; starting again
Boot reached stage -81
Boot reached stage 80
1G-FD
BOOTP broadcast 1
BOOTP broadcast 2
Retry count exceeded; starting again
Boot reached stage -81
Boot reached stage 80
1G-FD
Using QTN-EMAC device
TFTP from server 1.1.1.1; our IP address is 1.1.1.2
Filename 'u-boot.bin'.
Load address: 0x88000000
Loading: Quantenna Mini U-Boot
Version: v36.5.0.7 Built: 4жњ€ 21 2014 at 15:19:42
Boot reached stage 64
Boot reached stage 65
QTN-EMAC
Boot reached stage 80
LTN5
Using QTN-EMAC device
TFTP from server 1.1.1.1; our IP address is 1.1.1.2
Filename 'u-boot.bin'.
Load address: 0x88000000
Loading: #############
done
Bytes transferred = 68848 (0x10cf0)
Boot reached stage 81
Boot reached stage 84
Boot reached stage 13
Boot reached stage 12
Valid CRC found in flash restoring env...
Boot reached stage 11
Reset status: 0x00000002
hw_config_id 65535: 'QHS840_5S1'
Cold boot
Info: data uncached: addr=0xc0000000 size=1024MB
Info: text at 0x88014000, stack at 0x88013ffc(8192),
heap at 0x88000000(73728), uboot size 173140
Info: i-cache is enabled
Info: d-cache is enabled
Info: CPU freq is 500000000, dev freq is 125000000
Info: Quantenna U-Boot version:v36.6.0.7
Info: build date ' 8жњ€ 21 2014', time '23:23:40'
SPI flash info:
name : w25x05
jedec_id : 0xef3010
sector size : 4096
number of sector : 16
frequency : 104000000
flags : 0x2
lock :
DDR_INIT: type = 16 speed = 500MHz
BDA at 0x80002000
In: serial
Out: serial
Err: serial
Coot reached stage 64
PHY 0x1cc915 found on MDIO addr:1
Enable phy SSC
Boot reached stage 65
QTN-EMAC
Hit any key to stop autoboot: 2 ��� 1 ��� 0
Boot reached stage 80
1G-FD
Using QTN-EMAC device
TFTP from server 1.1.1.1; our IP address is 1.1.1.2
Filename 'topaz-linux.lzma.img'.
Load address: 0x83000000
Loading: #################дд#д#############ж################д#############
###д#ж###ц############ж###########д#дд####д#ц#################ж##
#######д####д#################д#########д#######д################
д##жж##д####жц##########дд############д######жжд####ж#д#########ц
###########ж####ц##############ж##д#####ж#######д#########д####ж#
#######ж#######ж#####дд#######ж####д####д########д#######д######ц
####дд#######д##########ж######жддддд############################
##########д######дд##################д#########ж#########ж###д###
#################д##############цж##дд################ж##д####жцж
###ж###жж##д#############ж###########ц##ц####ж##########д###д####
#дд##############д###############д#цд###д############ж##ж###д####
##ж#######ж##д####ж#####################д####ц###################
##д#########д########ц##д#####ц##д##д#####ж###д###########ж##ж#ж#
#######
done
Bytes transferred = 4358750 (0x42825e)
Boot reached stage 81
Boot reached stage 84
Boot reached stage 1
## Booting kernel from Legacy Image at 83000000 ...
Boot reached stage 2
Boot reached stage 3
Image Name: topaz-linux
Image Type: arc Linux Kernel Image (lzma compressed)
Data Size: 4350558 Bytes = 4.1 MB
Load Address: 846da000
Entry Point: 846da000
Verifying Checksum ... OK
Boot reached stage 4
Boot reached stage 5
Boot reached stage 6
Boot reached stage 14
Uncompressing Kernel Image ... OK
Boot reached stage 7
Boot reached stage 8
Command line TAG setup
Params->u.cmdline.cmdline console=ttyS0,115200n8 earlyprintk=1 hw_config_id=65535
p console=ttyS0,115200n8 earlyprintk=1 hw_config_id=65535
## Transferring control to Linux (at address 846da000) ATAG parameters 8803bb50 - 8803bba8...
[ 0.000000] Linux version 2.6.35.12 (raymonddev@raymonddev-vm1210)
(gcc version 4.2.1 (ARC_2.3)) #2 Thu Aug 21 23:35:41 CST 2014
[ 0.000000] Parsing ATAG parameters from bootloader
[ 0.000000] ATAG_CORE: successful parsing
[ 0.000000] ATAG_CMDLINE: command line = console=ttyS0,115200n8 earlyprintk=1 hw_config_id=65535
[ 0.000000] Board id: 65535
[ 0.000000] ATAG_HW_CONFIG_ID: hw_config_id = 65535
[ 0.000000]
[ 0.000000] Processor Family: ARC 700 [0x33]
[ 0.000000] CPU speed : 500.00 Mhz
[ 0.000000] Timers: TIMER1 TIMER0
[ 0.000000] Interrupt Vect Base: 0x88026800
[ 0.000000] Peripheral Base: NOT present; assuming 0xCOFC0000
[ 0.000000] Data UNCACHED Base (I/O): start 0xc0 Sz, 1024 MB
[ 0.000000] ARC700 MMU Ver [2]
[ 0.000000] PAGE SIZE 8k
[ 0.000000] JTLB 128 x 2 = 256 entries
[ 0.000000] uDTLB 8 entr, uITLB 4 entr
[ 0.000000] TLB Refill "will NOT" Flush uTLBs
[ 0.000000] Detected I-cache :
[ 0.000000] Type=2 way set-assoc, Line length=32, Size=16K (enabled)
[ 0.000000] Detected D-cache :
[ 0.000000] Type=4 way set-assoc, Line length=32, Size=16K (enabled)
[ 0.000000] Extensions:
[ 0.000000] MPY: 32x32 with ANY Result Reg MAC MPY: Dual 16 x 16 and 32 x 16
[ 0.000000] DCCM: N/A ICCM: N/A
[ 0.000000] CRC: N/A, SWAP: Present NORM: Present
[ 0.000000] Min-Max: Present, Barrel Shifter: Present
[ 0.000000] Ext Arith Insn: Present
[ 0.000000] Floating Point Extension: N/A
[ 0.000000] On node 0 totalpages: 16383
[ 0.000000] free_area_init_node: node 0, pgdat 8543d9ac, node_mem_map 854e0024
[ 0.000000] Normal zone: 72 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16311 pages, LIFO batch:3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16311
[ 0.000000] Kernel command line: console=ttyS0,115200n8 earlyprintk=1 hw_config_id=65535
[ 0.000000] bootconsole [ruby_early0] enabled
[ 0.000000] PID hash table entries: 512 (order: -2, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 3, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 2, 32768 bytes)
[ 0.000000] Memory: 43408KB available (2134K code,1137K data, 11080K init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU debugfs-based tracing is enabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] clockevent mode switch to [1]
[ 0.000000] clockevent mode switch to [2]
[ 0.100000] Calibrating delay loop... 248.21 BogoMIPS (lpj=620544)
[ 0.105000] pid_max: default: 4096 minimum: 301
[ 0.110000] Mount-cache hash table entries: 1024
[ 0.115000] Starting run_ksoftirqd, stack (thread_info) at 88010000 cpu 0
[ 0.120000] NET: Registered protocol family 16
[ 0.125000] Topaz heap in SRAM 880164a0<->88020000
[ 0.130000] Quantenna I2C device register
[ 0.140000] bio: create slab <bio-0> at 0
[ 0.145000] Switching to clocksource ARC Timer1
[ 0.155000] NET: Registered protocol family 2
[ 0.160000] IP route cache hash table entries: 2048 (order: 0, 8192 bytes)
[ 0.165000] TCP established hash table entries: 4096 (order: 2, 32768 bytes)
[ 0.170000] TCP bind hash table entries: 4096 (order: 1, 16384 bytes)
[ 0.175000] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.180000] TCP reno registered
[ 0.185000] NET: Registered protocol family 1
[ 0.650000] JFFS2 version 2.2. (NAND) Вj’‚‚Љk’‚‚І�’•‘ЃHat, Inc.
[ 0.655000] msgmni has been set to 84
[ 0.655000] io scheduler noop registered (default)
[ 1.085000] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
[ 1.095000] serial8250.0: ttyS0 at MMIO 0xf0000000 (irq = 48) is a 16550A
[ 1.100000] console [ttyS0] enabled, bootconsole disabled
[ 1.100000] console [ttyS0] enabled, bootconsole disabled
[ 1.105000] brd: module loaded
[ 1.115000] loop: module loaded
[ 1.120000] Creating 3 MTD partitions on "spi_flash":
[ 1.125000] 0x000000000000-0x000000005000 : "uboot"
[ 1.135000] 0x000000005000-0x00000000b000 : "uboot_env"
[ 1.140000] 0x00000000b000-0x000000010000 : "data"
[ 1.150000] spi_flash: SPI flash driver initialized successfully!
[ 1.155000] ruby_health loading
[ 1.650000] topaz_hbm_init_pool_list pool 0 pool_list 0x88000000
bus_range 0x4ac000 to 0x24ac000 sz 4096 count 8192
[ 1.650000] topaz_hbm_init_pool_list pool 1 pool_list 0x88008000
bus_range 0x24ac000 to 0x46ac000 sz 17408 count 2048
[ 1.650000] topaz_hbm_init_pool_list pool 3 pool_list 0x8800a000
bus_range 0x0 to 0x0 sz 0 count 4096
[ 1.655000] topaz_busmon_init success
[ 1.660000] topaz_temp_sens_init success
[ 1.665000] u32 classifier
[ 1.665000] input device check on
[ 1.670000] Actions configured
[ 1.675000] Netfilter messages via NETLINK v0.30.
[ 1.680000] nf_conntrack version 0.5.0 (678 buckets, 2712 max)
[ 1.685000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.690000] TCP cubic registered
[ 1.690000] NET: Registered protocol family 10
[ 1.700000] NET: Registered protocol family 17
[ 1.705000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 1.710000] All bugs added by David S. Miller <davem@redhat.com>
[ 1.720000] Freeing unused kernel memory: 11080k freed [846da000] TO [851ac000]
[ 1.725000] Common mmap addr-space starts 2b0f0000
init started: BusyBox v1.10.3 (2014-08-21 23:24:37 CST)
starting pid 36, tty '': '/etc/init.d/rcS'
Starting portmap: done
Initializing random number generator... done.
[ 2.080000] load_module: 'bootcfg' using DRAM (offset:0x861f0000, size:0x8f08)
current qtn_hw_config name: QHS840_5S1
current qtn_hw_config wifi_hw: 8
Starting network...
[ 2.730000] load_module: 'rtl8367b' using DRAM (offset:0x86240000, size:0x32435)
[ 2.735000] rtl8367b: module license 'unspecified' taints kernel.
[ 2.775000] Disabling lock debugging due to kernel taint
[ 2.825000] load_module: 'emaclib' using DRAM (offset:0x86280000, size:0x509e)
[ 2.905000] load_module: 'dpi' using DRAM (offset:0x86194000, size:0x1bb9)
[ 2.935000] load_module: 'fwt_if' using DRAM (offset:0x8788e640, size:0x1168)
[ 2.965000] load_module: 'switch_tqe' using DRAM (offset:0x86218000, size:0x36ef)Cб
[ 2.990000] tqe_descs_alloc: 512 tqe_rx_descriptors at kern uncached 0x550e04a8 bus 0x800164a8
[ 3.030000] load_module: 'fwt_ctrl' using DRAM (offset:0x862a0000, size:0x1f091)
[ 3.085000] load_module: 'switch_emac' using DRAM (offset:0x86198000, size:0x179d)Cб
[ 3.120000] topaz_emac_init, emac0
[ 3.125000] Random stuff 96
[ 3.785000] emac_eth_mii: probed
[ 3.785000] emac_lib eth1_emac0: index 0 id 0x1cc915 addr 0
[ 3.790000] emac_lib eth1_emac0: index 1 id 0x1cc915 addr 1
[ 3.795000] emac_lib eth1_emac0: phy_id 0x1cc915 addr 1
[ 3.835000] emac_lib eth1_emac0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mdio_bus, irq=-1)
[ 3.845000] topaz_dpi_init initialized for emac0
[ 3.850000] topaz_emac_init, emac1
[ 3.855000] topaz_dpi_init initialized for emac1
emac0 is eth1_1, emac1 is eth1_0
Stateless mode. Using temporary ip address:
cat: can't open '/mnt/jffs2/nvram.txt': No such file or directory
------------------------------
------------------------------
Using IP address 169.254.39.2
Using netmask 255.255.255.0
[ 4.500000] emac_lib eth1_0: force link (1000/Full)
[ 4.510000] device eth1_0 entered promiscuous mode
[ 4.520000] br0: port 1(eth1_0) entering forwarding state
[ 4.525000] br0: port 1(eth1_0) entering forwarding state
sed: mnt/jffs2/wireless_conf.txt: No such file or directory
[ 4.600000] device eth1_1 entered promiscuous mode
[ 4.605000] br0: port 2(eth1_1) entering forwarding state
[ 4.610000] br0: port 2(eth1_1) entering forwarding state
[ 4.615000] FWT: [d4:ca:6d:33:41:a3] add entry, port:emac1 node:0 entries:1
/sbin/ifup -a
[ 4.740000] FWT: [78:24:af:93:af:f0] add entry, port:emac1 node:0 entries:2
ifconfig: SIOCSIFNETMASK: Cannot assign requested address
ifconfig: SIOCSIFNETMASK: Cannot assign requested address
[ 4.905000] eth1_1: link up (1000/Full)
[ 4.905000] FWT: [90:2b:34:5e:70:42] add entry, port:emac0 node:0 entries:3
Telnet disabled
Starting wireless...
[ 5.215000] FWT: [3c:4a:92:74:35:e8] add entry, port:emac0 node:0 entries:4
[ 5.220000] FWT: [ac:f2:c5:35:37:2a] add entry, port:emac0 node:0 entries:5
-----------------------------------------------------------------
-----------------------------------------------------------------
Creating wireless_conf.txt from default_config.txt
[restore] change pwr from 19 to 23
[ 5.900000] FWT: [d8:50:e6:f3:36:64] add entry, port:emac0 node:0 entries:6
[5G] ccode_5g us found, set wireless driver and update to wireless_conf
complete
rm: cannot remove '/scripts/router_command.sh': No such file or directory
=== Waiting for stateless slave to boot
[ 9.875000] FWT: [00:0c:29:00:2b:eb] add entry, port:emac0 node:0 entries:7
[ 10.450000] FWT: [a8:20:66:12:17:ef] add entry, port:emac0 node:0 entries:8
[ 10.455000] FWT: [84:34:97:b5:84:38] add entry, port:emac1 node:0 entries:9
=== Starting stateless slave configuration
=== Setting bf to 1
complete
[ 11.705000] FWT: [60:51:2c:42:77:20] add entry, port:emac1 node:0 entries:10
=== Setting bw to 80
complete
=== Setting channel to 149
complete
=== Setting mode to ap
complete
=== Setting pwr to 23
complete
=== Setting region to us
Jan 1 00:00:12 qcsapi_regulatory_database[477]: database /proc/bootcfg/qtn_regulatory_db.bin is loaded.
complete
=== Setting staticip to 1
complete
=== Setting vht to 1
complete
=== waiting start-prod
complete
cat: can't open '/mnt/jffs2/nvram.txt': No such file or directory
=== waiting start-prod
------------------------------
------------------------------
Using IP address 169.254.39.2
Using netmask 255.255.255.0
Loading modules
[ 13.980000] load_module: 'qtn_debug' using DRAM (offset:0x86216000, size:0x403)
[ 14.040000] load_module: 'i2cbus' using DRAM (offset:0x862f9000, size:0xbb2)
[ 14.065000] se95-i2c : I2C driver register code = 0
[ 14.130000] load_module: 'qtsens' using DRAM (offset:0x86216800, size:0x7bf)
[ 14.150000] temp_sensor: (SE95) has not been detected
[ 14.225000] load_module: 'pm_interval' using DRAM (offset:0x86384000, size:0x13b2)
[ 14.325000] load_module: 'wlan' using DRAM (offset:0x86400000, size:0x5deb1)
[ 14.535000] wlan: 0.8.4.2 (0.9.3.3)
[ 14.685000] load_module: 'radar' using DRAM (offset:0x863c0000, size:0x19ded)
[ 14.735000] load_module: 'qvspmod' using DRAM (offset:0x863a0000, size:0x10503)
[ 14.820000] load_module: 'qdrv' using DRAM (offset:0x86500000, size:0x7cc58)
[ 15.050000] load_module: 'wlan_xauth' using DRAM (offset:0x862ea800, size:0x32f)
[ 15.250000] load_module: 'wlan_ccmp' using DRAM (offset:0x8639e000, size:0x17b6)
[ 15.350000] load_module: 'wlan_tkip' using DRAM (offset:0x863f4000, size:0x265e)
[RT-AC87U] start syslogd
Loading MuC driver (qtn_driver.qtn_ruby.0.bin)
Waiting for Wireless Events from interfaces...
MYROUTER: wifi_mode=[ap]
[ 16.125000] MuC: uc_print_initialise_shared_data linux buf 557c1a80
[ 16.130000] MuC: build date=Wed Aug 13 18:40:49 PDT 2014
[ 16.135000] MuC: slow heap begin=0x001d3a20 end=0x0032fa20
[ 16.140000] MuC: fast heap begin=0x800307a0 end=0x800387a0
[ 16.145000] MuC: stack start=0x8003efc0 sp=0x8003f724
[ 16.150000] MuC: calstate is 3 (prod), dcache on
[ 16.155000] MuC: scancnt=4
[ 16.155000] MuC: 4x4 11ac FO RGMII/PCIe QV840
[ 16.225000] MuC: RFIC version = 1
[ 16.240000] MuC: os_uc, after bb_rf_complete_attach.
[ 16.245000] MuC: fd start=0xe5040300 count=48 size=108 end=0xe5041740
[ 16.250000] MuC: TX QoS schedule=0
[ 16.255000] MuC: dynamic one-bit autocorrelation enabled
[ 16.260000] MuC: bbrf_get_RFIC_freqID 1 g_proj_ID 1
[ 16.265000] MuC: enable IRQs
[ 16.270000] MuC: Wait for AuC ready
[ 16.270000] MuC: Sync with AuC
[ 16.275000] MuC: AuC is booted: 0xe5100ba4:0x6005e918 auc ilink addr: 0xe510025c:0xe5100260
[ 16.280000] MuC: node stats - 0x6005d258
[ 16.280000] MuC: vap stats - 0x6005e5d8
[ 16.285000] AuC: uc_print_initialise_shared_data linux buf 55fc01f8
[ 16.290000] qdrv_wlan_80211_init rf_chipid 1
[ 16.295000] QDRV: power adjust scancnt=0
[ 16.300000] QDRV: using default temperature profile
[ 16.305000] QDRV: could not read temperature sensor
[ 16.310000] MuC boot succeeded 0.095 seconds
[ 16.395000] load_module: 'wlan_scan_ap' using DRAM (offset:0x864ea000, size:0x1f66)
[ 16.515000] MuC: bbrf_get_RFIC_freqID 1 g_proj_ID 1
[ 16.545000] VAP create succeeded 0.020 seconds
[ 16.815000] set_cap_bw: ic_phymode = 13
[ 16.860000] MuC: g_calibration_algo_ver_to_report_dciq == 0x801
copy /scripts/sysdeps/RT-AC87U/tx_power to /etc/
[5G] ccode_5g us found, set wireless driver and update to wireless_conf
radar in 80MHZ mode
version of /proc/bootcfg/qtn_regulatory_db.bin is v36.5.0.4
version of /etc/qtn_regulatory_db.bin is v36.6.0.3
Select database version: v36.6.0.3
Configuring to load /etc/qtn_regulatory_db.bin
[ 17.725000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (52)
[ 17.730000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (56)
[ 17.735000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (60)
[ 17.740000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (64)
[ 17.745000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (100)
[ 17.750000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (104)
[ 17.755000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (108)
[ 17.760000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (112)
[ 17.765000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (116)
[ 17.770000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (120)
[ 17.775000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (124)
[ 17.780000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (128)
[ 17.785000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (132)
[ 17.790000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (136)
[ 17.795000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (140)
[ 17.800000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (144)
radar start with regulatory us
[ 18.825000] OCAC: parameters updated, country_code: 840
[ 19.100000] device wifi0 entered promiscuous mode
[ 19.150000] Enabling SSDP flooding
Enabling beamforming
802.11ac Enabled
[ 19.675000] qdrv_sch_red: available tokens (8) is not enough
[ 19.775000] qdrv_sch_red: attached to eth1_0
SCS disabled
DSP: load profile off
[ 20.005000] qvsp_ioctl_rule_del_index: rule delete done
[ 20.055000] qvsp_strm_reset: stream reset
VSP enabled: 0
.K�’б sts: unknown operand
[ 20.360000] start ba_setup detect timer
[ 20.745000] [2]Comparing register set Global control
[ 20.765000] [6]Comparing register set BB Global regs
RT-AC87U: monitor led
monitor_wifi: no process killed
monitor ID 0, uboot update flag 0
complete
complete
[ 21.985000] FWT: [01:00:5e:00:01:01] add entry, port:emac1 node:0 entries:11
=== Setting security parameters
=== Setting AP parameters
=== Setting SSID to ******
complete
=== Setting Authentication protocol to 11i
complete
=== Setting WPA encryption mode to AESEncryption
complete
=== Setting WPA authentication mode to PSKAuthentication
complete
=== Setting passphrase to ******
complete
=== Starting wireless
[ 24.120000] MuC: Soft TQE ring init. emac0 size = 1024, emac1 size = 1024
[ 24.125000] MuC: RALG: Error 11ac 4ss table index 22 rate 22 has incorrect higher rate 13
[ 24.130000] MuC: RALG: Error 11ac 4ss table index 33 rate 34 has incorrect higher rate 24
[ 24.135000] AuC: triple: free 0 rxq 8 8 64 descriptors: addr 0x80040100 size 1280 rx status: addr 0x80040600 size 2560
[ 24.140000] AuC: last_ilink1 addr=0xe510025c, last_ilink2 addr=0xe5100260
[ 24.145000] AuC: AuC rx watchdog started
[ 24.155000] WPS: push button is not configured
[ 24.160000] MuC: WMM AC 0:3,4,6,0 1:7,4,10,0 2:1,3,4,188 3:1,2,3,188
[ 24.165000] br0: port 3(wifi0) entering forwarding state
[ 24.170000] br0: port 3(wifi0) entering forwarding state
start-prod: adding default "manufacturer=ASUS" to /mnt/jffs2/hostapd.conf
start-prod: adding default "device_name=Router" to /mnt/jffs2/hostapd.conf
start-prod: adding default "model_name=Router" to /mnt/jffs2/hostapd.conf
start-prod: adding default "model_number=QV860.00" to /mnt/jffs2/hostapd.conf
start-prod: adding default "serial_number=7824AF93AFF4" to /mnt/jffs2/hostapd.conf
start-prod: adding default "friendly_name=UPnP Access Point" to /mnt/jffs2/hostapd.conf
start-prod: adding default "device_type=6-0050F204-1" to /mnt/jffs2/hostapd.conf
[ 24.830000] br0: port 3(wifi0) entering forwarding state
[ 24.930000] br0: port 3(wifi0) entering forwarding state
[ 25.675000] br0: port 3(wifi0) entering forwarding state
complete
=== Applying security configuration
Wait 20 seconds to start stateless
S55rpc startup
starting pid 1061, tty '/dev/console': '/bin/sh -l'
/scripts/cmdloop starting /sbin/call_qcsapi_rpcd, at 00:00:26 up 0 min, load average: 0.40, 0.09, 0.03
/scripts/cmdloop starting /sbin/qcsapi_rpcd, at 00:00:26 up 0 min, load average: 0.40, 0.09, 0.03
BusyBox v1.10.3 (2014-08-21 23:24:37 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/scripts/cmdloop starting /sbin/rmt_qcsapi_server, at 00:00:26 up 0 min, load average: 0.40, 0.09, 0.03
quantenna # complete
=== Apply some hardware wireless setting
=== Setting IP address and netmask to 169.254.39.75
=== skip get tweak_qcomm
=== Done setting up stateless slave
[ 28.060000] (RF,BB) = (12, 3), (12, 3), (12, 0), (12, 10)
[ 28.065000] Voltage = 106, 130, 195, 296
[ 28.070000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 28.070000] TEMPERATURE_RFIC_INTERAL = 44.1
[ 28.090000] set_cap_bw: ic_phymode = 13
[ 28.165000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (52)
[ 28.170000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (56)
[ 28.180000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (60)
[ 28.185000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (64)
[ 28.190000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (100)
[ 28.195000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (104)
[ 28.200000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (108)
[ 28.205000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (112)
[ 28.210000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (116)
[ 28.215000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (120)
[ 28.220000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (124)
[ 28.225000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (128)
[ 28.230000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (132)
[ 28.235000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (136)
[ 28.240000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (140)
[ 28.245000] ieee80211_ioctl_set_chan_dfs_required: Mark DFS channel (144)
[ 29.200000] radar start with
[ 29.250000] qdrv_radar_enable: ERROR - radar already enabled regulatory us
[ 29.260000] OCAC: parameters updated, country_code: 840
[ 31.875000] wifi0: station 10:08:c1:05:b8:ec associated, tot=1/1
[ 31.930000] wifi0: station 10:08:c1:05:b8:ec disassociated, tot=0/0
[ 31.955000] (RF,BB) = (12, 3), (12, 3), (12, 0), (12, 10)
[ 31.960000] Voltage = 107, 130, 194, 474
[ 31.965000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 31.965000] TEMPERATURE_RFIC_INTERAL = 44.1
[ 32.350000] FWT: [00:0c:29:2f:56:c3] add entry, port:emac0 node:0 entries:12
[ 32.355000] FWT: [00:0c:29:f2:58:b9] add0entry, port:emac0 node:0 entries:13
[ 32.360000] FWT: [00:0c:29:1f:d0:5f] add entry, port:emac0 node:0 entries:14
[ 32.395000] FWT: [00:0c:29:c2:74:02] add entry, port:emac0 node:0 entries:15
[ 32.585000] wifi0: station 10:08:c1:05:b8:ec associated, tot=1/1
[ 32.625000] FWT: [10:08:c1:05:b8:ec] add entry, port:wmac node:6 entries:16
[ 35.890000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 35.895000] Voltage = 477, 469, 506, 475
[ 35.895000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 35.900000] TEMPERATURE_RFIC_INTERAL = 44.1
[ 36.300000] wifi0: [10:08:c1:05:b8:ec] block ack allowed by peer tid: 0 size 16
[ 36.300000] wifi0: [10:08:c1:05:b8:ec] block ack allowed by peer tid: 6 size 16
[ 36.380000] FWT: [01:00:5e:00:00:fa] add entry, port:wmac node:6 entries:17
[ 39.830000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 39.835000] Voltage = 477, 470, 506, 470
[ 39.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 39.840000] TEMPERATURE_RFIC_INTERAL = 44.1
[ 43.830000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 43.830000] Voltage = 477, 467, 506, 472
[ 43.830000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 43.835000] TEMPERATURE_RFIC_INTERAL = 44.1
[ 47.400000] wifi0: station 38:aa:3c:0f:45:c7 associated, tot=2/2
[ 47.460000] FWT: [38:aa:3c:0f:45:c7] add entry, port:wmac node:7 entries:18
[ 47.825000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 47.830000] Voltage = 475, 465, 506, 468
[ 47.830000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 47.835000] TEMPERATURE_RFIC_INTERAL = 44.1
[ 49.440000] wifi0: [38:aa:3c:0f:45:c7] block ack allowed by peer tid: 0 size 8
[ 49.440000] wifi0: [38:aa:3c:0f:45:c7] block ack allowed by peer tid: 6 size 8
[ 51.820000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 51.825000] Voltage = 460, 444, 494, 472
[ 51.825000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 51.830000] TEMPERATURE_RFIC_INTERAL = 44.1
[ 55.820000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 55.825000] Voltage = 452, 453, 494, 470
[ 55.825000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 55.830000] TEMPERATURE_RFIC_INTERAL = 44.1
[ 59.900000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 59.905000] Voltage = 452, 468, 505, 467
[ 59.905000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 59.910000] TEMPERATURE_RFIC_INTERAL = 44.1
[ 63.835000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 63.840000] Voltage = 503, 442, 506, 470
[ 63.840000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 63.845000] TEMPERATURE_RFIC_INTERAL = 44.1
[ 67.830000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 67.835000] Voltage = 502, 466, 505, 465
[ 67.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 67.840000] TEMPERATURE_RFIC_INTERAL = 44.1
[ 71.830000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 71.835000] Voltage = 472, 465, 504, 469
[ 71.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 71.840000] TEMPERATURE_RFIC_INTERAL = 44.1
[ 75.830000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 75.835000] Voltage = 473, 464, 505, 468
[ 75.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 75.840000] TEMPERATURE_RFIC_INTERAL = 44.1
[ 75.840000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 79.835000] Voltage = 472, 466, 505, 466
[ 79.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 79.840000] TEMPERATURE_RFIC_INTERAL = 44.1
[ 81.640000] wifi0: [38:aa:3c:0f:45:c7] block ack allowed by peer tid: 1 size 8
[ 83.830000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 83.830000] Voltage = 451, 465, 492, 469
[ 83.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 83.835000] TEMPERATURE_RFIC_INTERAL = 44.1
[ 87.830000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 87.835000] Voltage = 473, 462, 504, 468
[ 87.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 87.840000] TEMPERATURE_RFIC_INTERAL = 44.1
[ 90.590000] FWT: [01:00:5e:00:00:fa] add IPv4: 239.0.0.2500port:emac0 node:0
[ 91.810000] FWT: [01:00:5e:00:01:3c] add entry, port:emac1 node:0 entries:19
[ 91.840000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 91.840000] Voltage = 469, 465, 498, 469
[ 91.850000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 91.850000] TEMPERATURE_RFIC_INTERAL = 44.1
[ 91.990000] FWT: [01:00:5e:40:98:8f] add entry, port:emac0 node:0 entries:20
[ 94.960000] FWT: [01:00:5e:28:a8:a8] add entry, port:emac0 node:0 entries:21
[ 95.830000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 95.835000] Voltage = 450, 464, 505, 467
[ 95.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 95.840000] TEMPERATURE_RFIC_INTERAL = 45.3
[ 99.830000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 99.835000] Voltage = 471, 464, 504, 467
[ 99.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 99.840000] TEMPERATURE_RFIC_INTERAL = 44.1
[ 103.825000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 103.830000] Voltage = 470, 463, 504, 467
[ 103.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 103.835000] TEMPERATURE_RFIC_INTERAL = 44.1
[ 107.835000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 107.840000] Voltage = 470, 463, 505, 465
[ 107.840000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 107.845000] TEMPERATURE_RFIC_INTERAL = 45.3
[ 111.830000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 111.835000] Voltage = 470, 462, 504, 468
[ 111.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 111.840000] TEMPERATURE_RFIC_INTERAL = 44.1
[ 115.830000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 115.835000] Voltage = 468, 463, 505, 468
[ 115.835000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 115.840000] TEMPERATURE_RFIC_INTERAL = 45.3
[ 119.060000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 119.065000] Voltage = 438, 464, 504, 462
[ 119.065000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 119.070000] TEMPERATURE_RFIC_INTERAL = 45.3
[ 121.445000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 121.450000] Voltage = 469, 463, 505, 466
[ 121.450000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 121.455000] TEMPERATURE_RFIC_INTERAL = 45.3
[ 124.815000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 124.820000] Voltage = 470, 464, 492, 466
[ 124.820000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 124.825000] TEMPERATURE_RFIC_INTERAL = 45.3
[ 128.815000] (RF,BB) = (19, 3), (18, 4), (17, 0), (12, 10)
[ 128.820000] Voltage = 470, 463, 504, 462
[ 128.820000] TEMPERATURE_RFIC_EXTERAL= 0.0
[ 128.825000] TEMPERATURE_RFIC_INTERAL = 45.3
|