AMIT WIP181AM

bgn (N150)
wireless router
WikiDevi.wi-cat.ru	AMIT WIP181AM
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	AMIT WIP181AM
FCC ID	PBLWIP181AM
Type	wireless router
CPU1	Ralink RT3050
CPU1 Type	MIPS 24KEc
CPU1 Speed	320 MHz 16-bit
Flash1 Chip	Eon EN29LV160BB-70TIP
Flash1 Size	4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size	? MiB
RAM1 Chip	Brand? Model?
ETH chip1	Ralink RT3050
Switch	Ralink RT3050
Ethernet Port Count	1-100MbE-WAN 4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	none specified
Power	5 VDC, 1.2 A
Connector type	barrel
Other
Default IP address: 192.168.123.254 the IP 192.168.123.254 is used by 28 additional devices of which 13 are AMIT devices Default login user: blank Default login password: admin blank:admin credentials used by 278 additional devices of which 10 are AMIT devices
Retail
FCC approval date	12 May 2009
Radio 1
Chip1	Ralink RT3050
Wireless interface OUI	none specified
Antenna Connector Type	RP-SMA
MIMO status	1x1:1
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 150 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

For a list of all currently documented AMIT device with specifications, see AMIT.

• 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

"11340Y20DS00002A1 2008/12/01" is silkscreened on the board in the FCC photos.

Default settings are per the FCC manual. The default SSID is likely default.