4ipnet HSG200

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
Wireless Hotspot Gateway
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
4ipnet HSG200
FCC ID
Type
access point
CPU1
Atheros AR7240
CPU1 Type
MIPS 24Kc
CPU1 Speed
400 MHz
Flash1 Chip
Brand? Model?
Flash1 Size
? MiB
RAM1 Size
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip
SK hynix HY5DU121622DTP-D43
ETH chip1
Atheros AR7240
Switch
Atheros AR7240
Ethernet Port Count
1-100MbE-WAN
2-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types
USB 2.0
USB ports
1
USB Hub Compatible
Untested
Power
12 VDC, 1.5 A
Connector type
barrel
Serial Port (UART)
DE-9
Other

Default SSID: HSG200-1
, HSG200-2
Default IP address: 192.168.1.254
the IP 192.168.1.254 is used by 156 additional devices
of which 0 are 4ipnet devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1331 additional devices
of which 3 are 4ipnet devices

Manuf/OEM/ODM
Retail
FCC approval date 23 September 2010
Country of manuf Taiwan
Radio 1
Chip1
Atheros AR9283
Wireless interface OUI
none specified
Antenna Connector Type
U.FL, RP-SMA
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"FN3A" and "REV:1.2" is silkscreened on the board in the FCC photos.

This is a LanReady OEM product.

The FCC test report lists additional models identified by this FCC ID. They are as follows..

  • 3 Port
    • Cenwell CHG-920X
    • LanReady AC920X
    • Wavecore WV-200HS
    • TRENDnet TEW-656HG
    • Pheenet WAS-105R
    • Airlink101 AR700HSN
    • Cerio WMR-200N
    • 4ipnet HSG200
    • Cipherium W1110
    • LevelOne WHG-1000
    • Kozumi K-500HPG
    • Wiborne HSG-100
    • USC W1110
    • RayTalk RA-5n5
    • Cenwell CAP-952X
    • LanReady AP952X
    • Wavecore WV-100IA
    • Pheenet WAP-854NP
    • Cerio WM-200N
    • Kozumi K-520WPG
    • Wiborne WAP-100
  • 2 Port
    • 4ipnet EAP200
    • 4ipnet EAP206
    • Cipherium A210
    • Cipherium A216
    • USC A210
    • USC A216
    • RayTalk RA-1000
    • (not listed, redirects to LanReady FCC ID) OvisLink AirLive WIAS-3200N (FCC ID: ODMWIAS32N)

Per 4ipnet's manual...

  • 192.168.1.254 IP for the Private subnet, no authentication required, admin:admin credentials
  • 192.168.11.254 IP for the Public subnet, authentication required
  • Default SSIDs of HSG200-1 (private, disabled by default, however?) and HSG200-2 (public)
    • WiGLE shows a few HSG200-2 SSIDs - w/ 06:1F:D4 (4) or 06:11:6B (1) OUIs