Buffalo LinkStation
From TechInfoDepot
Revision as of 02:01, 30 August 2019 by ShadowBot (talk | contribs) (→top: clean up, replaced: fla1_brand → fla1chipbrand, fla1_model → fla1chipmodel, fla1= → flash1size=, ram1= → ram1size=, ram1_brand → ram1chipbrand, ram1_model → ram1chipmodel, expansion_if_types → exp_if_types, expansion_usb_num →...)
| NAS | |
| Wikipedia | |
|---|---|
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt |
Status Unknown |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Buffalo LinkStation HLANIDT-CA |
| FCC ID |
none specified |
| Type |
NAS |
| CPU1 |
IDT 79RC32H434 |
| CPU1 Speed |
400 MHz |
| Flash1 Chip |
Macronix 29LV320ATTC-90 |
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
Hynix HY5DU121622BT-D43 |
| ETH chip1 |
Brand? Model? |
| Ethernet Port Count |
1-100M"100M" is not in the list (0, 10MbE, 100MbE, 1GbE, 2.5GbE, 5GbE, 10GbE, 20GbE) of allowed values for the "LAN speed" property.-LAN |
|
802dot11 OUI: none specified | |
| Stock FW OS |
Linux;2.4.17; |
| Expansion IF types |
USB 2.0, IDE |
| USB ports |
2 |
| USB Hub Compatible |
Untested |
| Power |
120-240 VDC, .6 A |
| Connector type |
AC (Figure-Eight) |
| Serial Port (UART) |
yes, internal, unpopulated, 3.3V TTL, 4-pin header |
| JTAG Port |
yes, unpopulated, 14-pin header |
| Other | |
|
Default IP address: 192.168.11.150 | |
| 3rd Party Firmware Support |
OpenLink, FreeLink |
| Retail | |
| ASIN |
B0000ZPPB4 |
| Country of manuf | Taiwan |
For a list of all currently documented IDT chipsets with specifications, see IDT.
For a list of all currently documented Buffalo device with specifications, see Buffalo.
NAS