ZyXEL Keenetic 4G III rev B
From TechInfoDepot
Jump to navigationJump to searchbgn (N300) | |||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
N300 Wireless 3G/4G Router | |||||||||||||||||||||
![]() | |||||||||||||||||||||
Homepage | |||||||||||||||||||||
Wikipedia | |||||||||||||||||||||
WikiDevi.wi-cat.ru | |||||||||||||||||||||
3rd Party Firmware | |||||||||||||||||||||
dd-wrt |
Status Unknown | ||||||||||||||||||||
OpenWrt |
Status Unknown | ||||||||||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||||||||||
Gargoyle |
Status Unknown | ||||||||||||||||||||
Platform | |||||||||||||||||||||
Brand • Model • Rev |
ZyXEL Keenetic 4G III rev B | ||||||||||||||||||||
Serial number prefix |
EMG1301-T10A | ||||||||||||||||||||
FCC ID |
none specified | ||||||||||||||||||||
Board ID |
2050500710 | ||||||||||||||||||||
Type |
wireless router | ||||||||||||||||||||
CPU1 |
MediaTek MT7628NN | ||||||||||||||||||||
CPU1 Type |
MIPS 24KEc | ||||||||||||||||||||
CPU1 Speed |
575 MHz | ||||||||||||||||||||
Flash1 Chip |
Winbond W25Q128BV | ||||||||||||||||||||
Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||||||||||||||||||
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> | ||||||||||||||||||||
RAM1 Chip |
Winbond W9751G6KB-25 | ||||||||||||||||||||
ETH chip1 |
MediaTek MT7628NN | ||||||||||||||||||||
Switch |
MediaTek MT7628NN | ||||||||||||||||||||
Ethernet Port Count |
1-100MbE-WAN 1-100MbE-LAN | ||||||||||||||||||||
Stock bootloader |
U-Boot 1.1.3 Ralink v4.0.0.3 NDMS | ||||||||||||||||||||
Stock FW OS |
Linux NDMS 2.16 | ||||||||||||||||||||
Expansion IF types |
USB 2.0 | ||||||||||||||||||||
USB ports |
1 | ||||||||||||||||||||
USB Hub Compatible |
Untested | ||||||||||||||||||||
Power |
12 VDC, 1 A | ||||||||||||||||||||
Connector type |
barrel | ||||||||||||||||||||
Serial Port (UART) |
yes, 4-pin header, J13 | ||||||||||||||||||||
Other | |||||||||||||||||||||
Default IP address: 192.168.1.1 | |||||||||||||||||||||
Manuf/OEM/ODM | |||||||||||||||||||||
3rd Party Firmware Support | |||||||||||||||||||||
Retail | |||||||||||||||||||||
Availability | End of Life | ||||||||||||||||||||
(Est.) release date | March 2016 | ||||||||||||||||||||
Country of manuf | China | ||||||||||||||||||||
Radio 1 | |||||||||||||||||||||
Chip1 |
MediaTek MT7628NN | ||||||||||||||||||||
Wireless interface OUI |
1C:74:0D | ||||||||||||||||||||
Antenna Connector Type |
soldered | ||||||||||||||||||||
MIMO status |
2x2:2 | ||||||||||||||||||||
Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||||||||||
802.11n |
up to 300 Mbps | ||||||||||||||||||||
802.11g |
up to 54 Mbps | ||||||||||||||||||||
802.11b |
up to 11 Mbps | ||||||||||||||||||||
WiFi Operating Frequency |
2.4 GHz | ||||||||||||||||||||
|
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented ZyXEL device with specifications, see ZyXEL.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Links of Interest
JTAG-Serial Info
Serial
Start U-Boot with OpenWrt 19.07.1 • >> |
---|
U-Boot 1.1.3 [4.0.0.3-30] (May 31 2017 - 15:07:28) Board: Ralink APSoC DRAM: 64 MB relocate_code Pointer at: 83fb0000 MediaTek SPI BBU flash driver, SPI clock: 31MHz flash manufacture id: ef, device id 40 18 find flash: W25Q128BV ============================================ Ralink UBoot Version: 4.0.0.3_NDMS -------------------------------------------- ASIC 7628_MP (Port5<->None) DRAM component: 512 Mbits DDR, width 16 DRAM bus: 16 bit Total memory: 64 MBytes Flash component: SPI Flash Date:May 31 2017 Time:15:07:28 ============================================ icache: sets:512, ways:4, linesz:32 ,total:65536 dcache: sets:256, ways:4, linesz:32 ,total:32768 ##### The CPU freq = 575 MHZ #### estimate memory size = 64 Mbytes Firmware test register status: 0x00000000 Resetting MT7628 PHY... Dual image: on Boot active: 1 Boot backup: 1 Boot fails: 0 Please choose the operation: 1: Load system code to SDRAM via TFTP. 2: Load system code then write to Flash via TFTP. 3: Boot system code via Flash (default). 4: Enter boot command line interface. 7: Load Boot Loader code then write to Flash via Serial. 9: Load Boot Loader code then write to Flash via TFTP. 3 You choosed 3 0 3: System Boot system code via Flash. ## Booting image at bc050000 ... Image Name: MIPS OpenWrt Linux-4.14.167 Created: 2020-01-29 16:05:35 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 1592885 Bytes = 1.5 MB Load Address: 80000000 Entry Point: 80000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80000000) ... ## Giving linux memsize in MB, 64 Starting kernel ... [ 0.000000] Linux version 4.14.167 (inflabz@PC) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r10911-c155900f66)) #0 Wed Jan 29 16:05:35 2020 [ 0.000000] Board has DDR2 [ 0.000000] Analog PMU set to hw control [ 0.000000] Digital PMU set to hw control [ 0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc) [ 0.000000] MIPS: machine is ZyXEL Keenetic 4G III rev.B |