ZIO X11

From TechInfoDepot
Jump to navigationJump to search
bg (G54)
Wireless G High Speed Broadband Router
3rd Party Firmware
dd-wrt
OpenWrt
Incompatible
Tomato any flavor
Incompatible
Platform
BrandModelRev
ZIO X11 A
FCC ID
none specified
Type
wireless router
CPU1
Marvell 88W8510
CPU1 Type
ARM 9
CPU1 Speed
160 MHz
Flash1 Chip
KH KH29LV400CBTC-70G
Flash1 Size
512 KiB 0.5 MiB <br />524,288 B <br />4,096 Kib <br />4 Mib <br />4.882812e-4 GiB <br />
RAM1 Size
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Chip
EtronTech EM636165TS-6G
ETH chip1
Marvell 88W8510
Switch
Marvell 88E6060
Ethernet Port Count
1-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 08:10:75 (1 E, 2 W)
Ethernet OUI: 08:10:75 (1 E, 2 W)

Stock FW OS
eCos
Expansion IF types
none specified
Power
9 VDC, 0.7 A
Connector type
barrel
Serial Port (UART)
yes, internal, 5-pin header, unpopulated, 3.3V TTL, (38400,8,N,1), J8
Other

Default SSID: ZIO
Default IP address: 192.168.10.1
the IP 192.168.10.1 is used by 115 additional devices
of which 2 are ZIO devices

Manuf/OEM/ODM
Retail
Availability Korea only
(Est.) release date July 2007
Country of manuf China
Radio 1
Chip1
Marvell 88W8510
Chip2
Marvell Model?
Wireless interface OUI
08:10:75
Antenna Connector Type
RP-SMA
Wireless Standard
IEEE 802.11b/g
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Marvell chipsets with specifications, see Marvell.

54 Mbps - 2.4GHz 802.11g = G54 class

Overview

"PB-862-M04F-30-GP", "MAY 25 2005", and a date code of 0728 (July 2007) is silkscreened on the board.

The board is using mostly Fcon branded radial capacitors.. though there are two CA <???> branded capacitors on the power side.

Serial

Serial Pinouts

^ to 88W8510

(GND)
(TxD) J8
(   )
(RxD)
(GND)

Boot log


down port 0x0 value 0x3800
down port 0x1 value 0x3800
down port 0x2 value 0x3800
down port 0x3 value 0x3800
down port 0x4 value 0x3800
state.Probs = 0xD03BC190
state.Probs = 0xD03BC190
state.Probs = 0xD03BC190
state.Probs = 0xD03BC190

ARM eCos
Loading Run Parameters...
Parameters Are Blank!
Loading Default Parameters...
create socket  success
setsocket socket  success
bind socket success