ZIO 3300N

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
Wireless Router
ZIO 3300N.jpg
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
OpenWrt
Incompatible
Tomato any flavor
Incompatible
Platform
BrandModelRev
ZIO 3300N
FCC ID
none specified
Type
wireless router
CPU1
CPU1 Type
Lexra RLX4181
CPU1 Speed
390 MHz
Flash1 Chip
Macronix MX25L1606EM2I-12G
Flash1 Size
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
RAM1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip
EtronTech EM639165TS-6G
ETH chip1
Switch
Ethernet Port Count
1-100MbE-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 00:2E:00
Ethernet OUI: 00:2E:00

Stock bootloader
rtkload v1.1f
Stock FW OS
Linux 2.6.30.9 Realtek SDK v2.5-r7984
Expansion IF types
none specified
Power
5 VDC, 1 A
Connector type
barrel
Other

Default SSID: zio
Default IP address: 192.168.10.1
the IP 192.168.10.1 is used by 115 additional devices
of which 2 are ZIO devices

Retail
(Est.) release date 08 April 2011
Country of manuf China
Radio 1
Chip1
Realtek RTL8192CE
Wireless interface OUI
00:2E:00
Antenna Connector Type
none specified
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"ZIO-3300N (2011. Bless Inc.)", "ST-NR5TA", and "2011/04/08 VER:1.3" is silkscreened on the board.

JTAG-Serial Info

Serial

Info derived from

boot log
Booting...
========== SPI =============

---RealTek(RTL8196C)at 2011.04.06-10:30+0900 version v1.1f [16bit](390MHz)
Jump to image start=0x80500000...
decompressing kernel:
Uncompressing Linux... done, booting the kernel.
done decompressing kernel.
start address: 0x80003600
RTL8192C/RTL8188C driver version 1.6 (2011-07-18)

Probing RTL8186 10/100 NIC-kenel stack size order[3]...
chip name: 8196C, chip revid: 0
NOT YET
eth0 added. vid=9 Member port 0x1...
eth1 added. vid=8 Member port 0x10...
eth2 added. vid=9 Member port 0x2...
eth3 added. vid=9 Member port 0x4...
eth4 added. vid=9 Member port 0x8...
[peth0] added, mapping to [eth1]...
init started: BusyBox v1.13.4 (2011-11-30 17:25:56 KST)
Init Start...
Init bridge interface...
Init Wlan application...
Init WAN Interface...
#

cat /proc/version

# cat /proc/version
Linux version 2.6.30.9 (root@minkyu-desktop) (gcc version 3.4.6-1.3.6) #47 Wed Nov 30 17:29:30 KST 2011

cat /proc/cmdline

# cat /proc/cmdline
console=ttyS0,38400 root=/dev/mtdblock1

cat /proc/meminfo + free

# cat /proc/meminfo
MemTotal:          11184 kB
MemFree:            1876 kB
Buffers:             720 kB
Cached:             3052 kB
SwapCached:            0 kB
Active:             1712 kB
Inactive:           2528 kB
Active(anon):        468 kB
Inactive(anon):        0 kB
Active(file):       1244 kB
Inactive(file):     2528 kB
SwapTotal:             0 kB
SwapFree:              0 kB
Dirty:                 0 kB
Writeback:             0 kB
AnonPages:           480 kB
Mapped:              584 kB
Slab:               4640 kB
SReclaimable:        248 kB
SUnreclaim:         4392 kB
PageTables:           84 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:        5592 kB
Committed_AS:       1516 kB
VmallocTotal:    1048404 kB
VmallocUsed:         264 kB
VmallocChunk:    1048136 kB
# free
              total         used         free       shared      buffers
  Mem:        11184         9312         1872            0          720
 Swap:            0            0            0
Total:        11184         9312         1872

cat /proc/mtd

# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00100000 00001000 "boot+cfg+linux"
mtd1: 00100000 00001000 "root fs"

ps aux

# ps aux
  PID USER       VSZ STAT COMMAND
    1 root      1216 S    init
    2 root         0 SW<  [kthreadd]
    3 root         0 SW<  [ksoftirqd/0]
    4 root         0 SW<  [events/0]
    5 root         0 SW<  [khelper]
    6 root         0 SW<  [async/mgr]
    7 root         0 SW<  [kblockd/0]
    8 root         0 SW   [pdflush]
    9 root         0 SW<  [kswapd0]
   10 root         0 SW<  [mtdblockd]
  140 root       956 S    udhcpd /var/udhcpd.conf
  161 root       948 S    udhcpc -i eth1 -p /etc/udhcpc/udhcpc-eth1.pid -s /usr
  170 root       916 S    reload -k /var/wlsch.conf
  185 root      1984 S    webs
  186 root      1224 S    -/bin/sh
  196 root      1216 R    ps aux

cat /proc/cpuinfo

# cat cpuinfo
system type             : RTL8196C
processor               : 0
cpu model               : 52481
BogoMIPS                : 389.12
tlb_entries             : 32
mips16 implemented      : yes

cat /etc/version

# cat version
RTL8196C v1.0 --  2011. 11. 30. (수) 17:27:20 KST
The SDK version is: Realtek SDK v2.5-r7984
Ethernet driver version is: 7953-7929
Wireless driver version is: 7977-7977
Fastpath source version is: 7873-6572
Feature support version is: 7927-7480

Pictures

User Images