Xiaomi MiWiFi Lite

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
Xiaomi MiWiFi Lite R1CL
Homepage
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Tomato any flavor
Incompatible
Gargoyle
Status Unknown
Platform
BrandModelRev
Xiaomi MiWiFi Lite R1CL
FCC ID
none specified
Type
wireless router
CPU1
MediaTek MT7628N
CPU1 Type
MIPS 24KEc
CPU1 Speed
575 MHz 32-bit
Flash1 Chip
Eliminate EN25Q64
Flash1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip
Winbond W9751G6KB-25
ETH chip1
MediaTek MT7628N
Switch
MediaTek MT7628N
Ethernet Port Count
1-100MbE-WAN
2-100MbE-LAN

802dot11 OUI: none specified

Stock bootloader
U-Boot
Stock FW OS
Linux 2.6.36
Expansion IF types
none specified
Power
5 VDC, 1 A
Connector type
Micro USB
Serial Port (UART)
yes, 4-pin header
Other

Default SSID: Xiaomi_XXXX (20 addl. devices)
Default IP address: 192.168.31.1
the IP 192.168.31.1 is used by 21 additional devices
of which 20 are Xiaomi devices

3rd Party Firmware Support
OpenWrt • (List | Dev | DLs)
Retail
(Est.) release date 2015
Country of manuf China
Radio 1
Chip1
MediaTek MT7628N
Wireless interface OUI
none specified
Antenna Connector Type
U.FL
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented Xiaomi device with specifications, see Xiaomi.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

Specifications

Short Description
Xiaomi Mi Wi-Fi Nano Router (Youth Version)
Category: Routers; Application: SOHO
CPU: [[MediaTek]] MT7628NN @580MHz WiSoC
Flash: [[Winbond]] W25Q128FV - 16MB (SPI)
RAM: [[Winbond]] W9751G6KB - 64MB (DDR2)
Protocol Standards: 802.11bgn
Wi-Fi Supported Frequency: 2.4GHz
Wi-Fi Transmission Rate: 300Mbps
Antenna: 2x External PCB antenna
WAN Ports: 1 FE (100Mbps)
LAN Ports: 2 FE (100Mbps)
Wired Transfer Rate: 100Mbps
Max. LAN Data Rate: 100Mbps
Number of USB Interfaces: 1x
With Modem Function: No
Built-in Firewall: No
Supports WDS: No
Supports WPS: No
Supports VPN: No
Package Size: 200 x 100 x 50 mm
Gross Weight/Package: 300 g

Flashing

Dev FW

Installation procedure:

JTAG-Serial Info

Serial

U-Boot bootlog
[04060C0B][04060D06]
DDR Calibration DQS reg = 00008A88


U-Boot 1.1.3 (Sep 25 2015 - 17:14:30)

Board: Ralink APSoC DRAM:  64 MB
relocate_code Pointer at: 83fa8000
RT2880_RSTSTAT_REG 0xc0030000
***************************
Board power on Occurred
***************************
flash manufacture id: ef, device id 40 18
find flash: W25Q128BV
*******env is cottupted,use default_environment!*********
*** Warning - bad CRC, using default environment

============================================
Ralink UBoot Version: 4.3.0.0
--------------------------------------------
ASIC 7628_MP (Port5<->None)
DRAM component: 512 Mbits DDR, width 16
DRAM bus: 16 bit
Total memory: 64 MBytes
Flash component: SPI Flash
Date:Sep 25 2015  Time:17:14:30
============================================
icache: sets:512, ways:4, linesz:32 ,total:65536
dcache: sets:256, ways:4, linesz:32 ,total:32768

 ##### The CPU freq = 575 MHZ ####
 estimate memory size =64 Mbytes
RESET MT7628 PHY!!!!!!
Please choose the operation:
   1: Load system code to SDRAM via TFTP.
   2: Load system code then write to Flash via TFTP.
   3: Boot system code via Flash (default).
   4: Entr boot command line interface.
   5: Load system2 code then write to Flash via TFTP.
   7: Load system code via web.
   9: Load Boot Loader code then write to Flash via TFTP.

You choosed 3
                                                                                                                                                                                            0

3: System Boot system code via Flash.
Try to boot OS1
Erasing SPI Flash...
raspi_erase: offs:30000 len:10000
.
Writing to SPI Flash...
.
done
## Booting image at bc050000 ...
   Image Name:   MIPS OpenWrt Linux-3.10.14
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1418615 Bytes =  1.4 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
fac_flag 0xffffffff
commandline uart_en=0 factory_mode=0 mem=64m
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 64

Starting kernel ...


LINUX started...

 THIS IS ASIC
[    0.000000] Linux version 3.10.14 (builder@xqtest-DailyBuild) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Tue Sep 8 17:18:55 CST 2015
[    0.000000]
[    0.000000]  The CPU feqenuce set to 575 MHz
[    0.000000]
[    0.000000]  MIPS CPU sleep mode enabled.
[    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
[    0.000000] Software DMA cache coherency
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] User-defined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
[    0.000000] Primary instruction cache 64kB, 4-way, VIPT, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: console=ttyS1,115200n8 root=/dev/mtdblock5 uart_en=0 factory_mode=0 mem=64m
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=0007d777
[    0.000000] Readback ErrCtl register=0007d777
[    0.000000] Memory: 60692k/65536k available (2894k kernel code, 4844k reserved, 886k data, 184k init, 0k highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:128
[    0.000000] console [ttyS1] enabled
[    0.110000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.170000] pid_max: default: 32768 minimum: 301
[    0.170000] Mount-cache hash table entries: 512
[    0.180000] NET: Registered protocol family 16
[    0.180000] RALINK_GPIOMODE = 54054404
[    0.190000] RALINK_GPIOMODE = 54044404
[    0.290000] ***** Xtal 40MHz *****
[    0.290000] start PCIe register access
[    0.790000] RALINK_RSTCTRL = 2400000
[    0.800000] RALINK_CLKCFG1 = fdbfffc0
[    0.800000]
[    0.800000] *************** MT7628 PCIe RC mode *************
[    1.300000] PCIE0 no card, disable it(RST&CLK)
[    1.330000] bio: create slab <bio-0> at 0
[    1.340000] cfg80211: Calling CRDA to update world regulatory domain
[    1.340000] Switching to clocksource Ralink Systick timer
[    1.350000] NET: Registered protocol family 2
[    1.350000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    1.360000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    1.370000] TCP: Hash tables configured (established 512 bind 512)
[    1.370000] TCP: reno registered
[    1.380000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    1.380000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    1.390000] NET: Registered protocol family 1
[    1.390000] Load Kernel WDG Timer Module
[    1.410000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.420000] jffs2: version 2.2. (NAND) (SUMMARY)  (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    1.430000] msgmni has been set to 118
[    1.440000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    1.440000] io scheduler noop registered (default)
[    1.460000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.460000] serial8250: ttyS0 at MMIO 0x10000d00 (irq = 21) is a 16550A
[    1.470000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[    1.480000] led=44, on=4000, off=1, blinks,=1, reset=1, time=4000
[    1.480000] Ralink gpio driver initialized
[    1.500000] brd: module loaded
[    1.510000] flash manufacture id: ef, device id 40 18
[    1.510000] W25Q128BV(ef 40180000) (16384 Kbytes)
[    1.520000] mtd .name = raspi, .size = 0x01000000 (16M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
[    1.530000] Creating 10 MTD partitions on "raspi":
[    1.530000] 0x000000000000-0x000001000000 : "ALL"
[    1.540000] 0x000000000000-0x000000030000 : "Bootloader"
[    1.540000] 0x000000030000-0x000000040000 : "Config"
[    1.550000] 0x000000040000-0x000000050000 : "Factory"
[    1.560000] 0x000000050000-0x000000bf0000 : "OS1"
[    1.560000] mtd: try split OS1 partition
[    1.570000] mtd: split_firmware
[    1.570000] mtd: firmware_partition->size   0xba0000
[    1.580000] mtd: firmware_partition->offset 0x50000
[    1.580000] mtd: uimage_len 1418679
[    1.580000] mtd: uimage_len 1441792
[    1.590000] mtd: rootfs_partition->size   0xa40000
[    1.590000] mtd: rootfs_partition->offset 0x1b0000
[    1.600000] mtd: partition "rootfs" created automatically, ofs=1B0000, len=A40000
[    1.610000] 0x0000001b0000-0x000000bf0000 : "rootfs"
[    1.610000] 0x000000bf0000-0x000000e30000 : "OS2"
[    1.620000] 0x000000e30000-0x000000ef0000 : "data"
[    1.630000] 0x000000ef0000-0x000000ff0000 : "overlay"
[    1.630000] 0x000000ff0000-0x000001000000 : "crash"
[    1.640000] 0x000000050000-0x000000bf0000 : "firmware"
[    1.650000] PPP generic driver version 2.4.2
[    1.650000] PPP MPPE Compression module registered
[    1.650000] NET: Registered protocol family 24
[    1.660000] PPTP driver version 0.8.5
[    1.660000] GMAC1_MAC_ADRH -- : 0x0000f0b4
[    1.670000] GMAC1_MAC_ADRL -- : 0x292285e8
[    1.670000] Ralink APSoC Ethernet Driver Initilization. v3.1  256 rx/tx descriptors allocated, mtu = 1500!
[    1.680000] GMAC1_MAC_ADRH -- : 0x0000f0b4
[    1.690000] GMAC1_MAC_ADRL -- : 0x292285e8
[    1.690000] PROC INIT OK!
[    1.690000] Netfilter messages via NETLINK v0.30.
[    1.700000] nfnl_acct: registering with nfnetlink.
[    1.700000] nf_conntrack version 0.5.0 (948 buckets, 3792 max)
[    1.710000] ip_set: protocol 6
[    1.710000] ipip: IPv4 over IPv4 tunneling driver
[    1.720000] gre: GRE over IPv4 demultiplexor driver
[    1.730000] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.730000] Type=Restricted Cone
[    1.730000] TCP: cubic registered
[    1.740000] NET: Registered protocol family 10
[    1.750000] NET: Registered protocol family 17
[    1.750000] l2tp_core: L2TP core driver, V2.0
[    1.750000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    1.760000] l2tp_netlink: L2TP netlink interface
[    1.760000] 8021q: 802.1Q VLAN Support v1.8
[    1.780000] registered taskstats version 1
[    1.790000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    1.800000] Freeing unused kernel memory: 184K (803b2000 - 803e0000)
config core 'version'
        # ROM ver
        option ROM '2.0.30'
        # channel
        option CHANNEL 'release'
        # hardware platform R1AC or R1N etc.
        option HARDWARE 'R1CL'
        # CFE ver
        option UBOOT '1.0.0'
        # Linux Kernel ver
        option LINUX '0.0.1'
        # RAMFS ver
        option RAMFS '0.0.1'
        # SQUASHFS ver
        option SQAFS '0.0.1'
        # ROOTFS ver
        option ROOTFS '0.0.1'
        #build time
        option BUILDTIME 'Tue, 08 Sep 2015 17:11:47 +0800'
        #build timestamp
        option BUILDTS '1441703507'
        #build git tag
        option GTAG 'commit 11dcb9cd396fa56e73cb6ae9bf77381a0aa975d3'
[    3.760000] Raeth v3.1 (Tasklet)
[    3.760000]
[    3.760000] phy_tx_ring = 0x03f33000, tx_ring = 0xa3f33000
[    3.770000]
[    3.770000] phy_rx_ring0 = 0x03f22000, rx_ring0 = 0xa3f22000
[    3.790000] config 7628 esw as LLLLW
[    3.870000] GMAC1_MAC_ADRH -- : 0x0000f0b4
[    3.870000] GMAC1_MAC_ADRL -- : 0x292285e8
[    3.870000] RT305x_ESW: Link Status Changed
- preinit -
Tue Sep  8 17:18:55 UTC 2015
Unlocking overlay ...
Erasing overlay ...
start nvram clear.....
nvram clear...Done!
nvram restore done.
- regular preinit -
mount: mounting /tmp/mnt on /extdisks failed: No such file or directory
ffffffff
overlay_head  ffffffff
[   10.460000] jffs2: notice: (552) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
85190320
[   11.000000] jffs2: notice: (573) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
jffs2 not ready yet; using ramdisk
Unlocking OS1 ...
- init -
[   16.150000] ra2880stop()...Done
[   16.150000] Free TX/RX Ring Memory!
init started: BusyBox v1.19.4 (2015-09-08 17:04:56 CST)

Please press Enter to activate this console. rcS S boot: INFO: rc script run time limit to 65 seconds.
[   19.240000] Mirror/redirect action on
[   19.270000] u32 classifier
[   19.270000]     input device check on
[   19.270000]     Actions configured
[   19.360000] ip_gre: GRE over IPv4 tunneling driver
[   19.460000] xt_time: kernel timezone is -0000
[   20.870000]
[   20.870000]
[   20.870000] === pAd = c05a5000, size = 1570408 ===
[   20.870000]
[   20.880000] <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
[   20.890000] <-- RTMPAllocAdapterBlock, Status=0
[   20.890000] RtmpChipOpsHook(492): Not support for HIF_MT yet!
[   20.900000] mt7628_init()-->
[   20.900000] mt7628_init(FW(8a00), HW(8a01), CHIPID(7628))
[   20.910000] e2.bin mt7628_init(1117)::(2), pChipCap->fw_len(63536)
[   20.910000] mt_bcn_buf_init(218): Not support for HIF_MT yet!
[   20.920000] <--mt7628_init()
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: #### Loopback configuration
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: config interface loopback
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: option ifname      lo
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: option proto       static
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: option ipaddr      127.0.0.1
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: option netmask     255.0.0.0
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: #### LAN configuration
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: config interface lan
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: option ifname      eth0.1
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: option type        bridge
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: option proto       static
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: option ipaddr      192.168.31.1
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: option netmask     255.255.255.0
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: #### WAN configuration
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: config interface wan
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: option ifname      eth0.2
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: option proto       dhcp
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: ### IFB interface for MiQoS
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: config interface ifb
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: option ifname ifb0
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: #### READY configuration
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: config interface ready
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: option proto    static
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: option ipaddr   169.254.29.1
Wed Sep  9 01:19:13 CST 2015 netconfig[988]: option netmask  255.255.255.0
[   25.950000] Raeth v3.1 (Tasklet)
[   25.960000]
[   25.960000] phy_tx_ring = 0x0351d000, tx_ring = 0xa351d000
[   25.970000]
[   25.970000] phy_rx_ring0 = 0x03424000, rx_ring0 = 0xa3424000
[   25.990000] config 7628 esw as LLLLW
[   26.060000] GMAC1_MAC_ADRH -- : 0x0000f0b4
[   26.070000] GMAC1_MAC_ADRL -- : 0x292285e8
[   26.070000] RT305x_ESW: Link Status Changed
[   26.120000] device eth0.1 entered promiscuous mode
[   26.120000] device eth0 entered promiscuous mode
[   26.150000] br-lan: port 1(eth0.1) entered forwarding state
[   26.150000] br-lan: port 1(eth0.1) entered forwarding state
[   27.960000] TX_BCN DESC a289e000 size = 320
[   27.970000] RX[0] DESC a28a2000 size = 2048
[   27.970000] RX[1] DESC a28a3000 size = 1024
[   28.020000] E2pAccessMode=2
[   28.020000] cfg_mode=9
[   28.030000] cfg_mode=9
[   28.030000] wmode_band_equal(): Band Equal!
[   28.090000] load fw image from fw_header_image
[   28.090000] AndesMTLoadFwMethod1(2181)::pChipCap->fw_len(63536)
[   28.100000] CmdAddressLenReq:(ret = 0)
[   28.100000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:0
[   28.110000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:0
[   28.110000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:0
[   28.120000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:0
[   28.120000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:0
[   28.130000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:0
[   28.130000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:0
[   28.140000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:0
[   28.140000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:0
[   28.150000] br-lan: port 1(eth0.1) entered forwarding state
[   28.150000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:0
[   28.160000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:0
[   28.170000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:0
[   28.170000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:0
[   28.180000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:0
[   28.180000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:0
[   28.190000] AndesInitCmdMsg:cmd_type:238,ExtCmdType:0
[   28.190000] CmdFwStartReq: override = 1, address = 1048576
[   28.200000] CmdStartDLRsp: WiFI FW Download Success
[   28.250000] MtAsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
[   28.250000] efuse_probe: efuse = 10000012
[   28.260000] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=4
[   28.260000] RtmpEepromGetDefault::e2p_dafault=2
[   28.270000] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 2
[   28.270000] NVM is FLASH mode
[   28.280000] 1. Phy Mode = 14
[   28.440000] Country Region from e2p = ffff
[   28.440000] tssi_1_target_pwr_g_band = 34
[   28.450000] 2. Phy Mode = 14
[   28.450000] 3. Phy Mode = 14
[   28.450000] NICInitPwrPinCfg(11): Not support for HIF_MT yet!
[   28.460000] NICInitializeAsic(651): Not support rtmp_mac_sys_reset () for HIF_MT yet!
[   28.470000] mt_mac_init()-->
[   28.470000] MtAsicInitMac()-->
[   28.490000] mt7628_init_mac_cr()-->
[   28.490000] MtAsicSetMacMaxLen(1279): Set the Max RxPktLen=1024!
[   28.500000] <--mt_mac_init()
[   28.500000]  WTBL Segment 1 info:
[   28.500000]          MemBaseAddr/FID:0x28000/0
[   28.510000]          EntrySize/Cnt:32/128
[   28.510000]  WTBL Segment 2 info:
[   28.510000]          MemBaseAddr/FID:0x40000/0
[   28.520000]          EntrySize/Cnt:64/128
[   28.520000]  WTBL Segment 3 info:
[   28.530000]          MemBaseAddr/FID:0x42000/64
[   28.530000]          EntrySize/Cnt:64/128
[   28.530000]  WTBL Segment 4 info:
[   28.540000]          MemBaseAddr/FID:0x44000/128
[   28.540000]          EntrySize/Cnt:32/128
[   28.540000] AntCfgInit(2903): Not support for HIF_MT yet!
[   28.550000] MCS Set = ff ff 00 00 01
[   28.550000] MtAsicSetChBusyStat(846): Not support for HIF_MT yet!
[   29.010000] CmdSlotTimeSet start
[   29.010000] CmdSlotTimeSet end
[   29.020000] CmdSlotTimeSet start
[   29.050000] CmdSlotTimeSet end
[   35.560000] MtAsicSetRalinkBurstMode(2971): Not support for HIF_MT yet!
[   35.560000] MtAsicSetPiggyBack(783): Not support for HIF_MT yet!
[   35.590000] MtAsicSetTxPreamble(2950): Not support for HIF_MT yet!
[   35.600000] MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xf0
[   35.600000] Main bssid = f0:b4:29:22:85:e9
[   35.610000] <==== rt28xx_init, Status=0
[   35.610000] set_obtw_delta_proc: found cck1m_, DeltaVal = 6
[   35.620000] set_obtw_delta_proc: found cck5m_, DeltaVal = 6
[   35.620000] set_obtw_delta_proc: found ofdm6m_, DeltaVal = 6
[   35.630000] set_obtw_delta_proc: found ofdm12m_, DeltaVal = 6
[   35.640000] set_obtw_delta_proc: found ht20mcs0_, DeltaVal = 6
[   35.640000] set_obtw_delta_proc: found ht20mcs1_, DeltaVal = 6
[   35.650000] set_obtw_delta_proc: found ht40mcs0_, DeltaVal = 6
[   35.650000] set_obtw_delta_proc: found ht40mcs32_, DeltaVal = 6
[   35.660000] set_obtw_delta_proc: found ht40mcs1_, DeltaVal = 6
[   35.670000] AndesInitCmdMsg:cmd_type:237,ExtCmdType:47
[   35.670000] set_obtw_delta_proc: anyEnable=1
[   37.550000] device wl1 entered promiscuous mode
[   37.550000] br-lan: port 2(wl1) entered forwarding state
[   37.560000] br-lan: port 2(wl1) entered forwarding state
[   37.650000] ##### mbss_cr_enable, BssId = 1
[   39.560000] br-lan: port 2(wl1) entered forwarding state
Wed Sep  9 01:19:32 CST 2015 boot_check[2520]: INFO: Wireless OK
[   49.600000] tcpproxy_init, succeed!
[   49.620000] http_identify: module license 'Proprietary' taints kernel.
[   49.620000] Disabling lock debugging due to kernel taint
[   66.050000] xqfp: init success!
[   66.060000] xqfp: init success!
[   66.060000] xqfp: module init success!
rcS S calling: /etc/rc.d/S99stat_points boot: logexec: exitcode 1, runt 65 /etc/rc.d/S99stat_points boot
rcS S calling: /etc/rc.d/S99stat_points boot: tail: can't open '/tmp/stat_points_rom.log': No such file or directory
rcS S calling: /etc/rc.d/S99stat_points boot: tail: can't open '/tmp/stat_points_web.log': No such file or directory
rcS S boot: INFO: rcS S boot timing 53 seconds.
Wed Sep  9 01:20:00 CST 2015 INFO: rcS S boot timing 53 seconds.
rcS S boot: system type(R1CL/2): SQUASH/3
Wed Sep  9 01:20:00 CST 2015 system type(R1CL/2): SQUASH/3
rcS S boot: ROOTFS: /dev/root on / type squashfs (ro,relatime)
Wed Sep  9 01:20:00 CST 2015 ROOTFS: /dev/root on / type squashfs (ro,relatime)
[   71.870000] led=37, on=1, off=4000, blinks,=1, reset=1, time=4000
[   72.320000] led=44, on=1, off=4000, blinks,=1, reset=1, time=4000
[   72.380000] led=11, on=4000, off=1, blinks,=1, reset=1, time=4000
mknod: /dev/gpio: File exists
Wed Sep  9 01:20:22 CST 2015 boot_check[4392]: Booting up finished.

See also