WAVLINK WL-WN570HA1

From TechInfoDepot
Jump to navigationJump to search
abgn+ac (AC600)
AC600 High Power Outdoor Wi-Fi Range Extender
Homepage
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
WAVLINK WL-WN570H A1
FCC ID
Type
access point, range extender
CPU1
MediaTek MT7688AN
CPU1 Type
MIPS 24KEc
CPU1 Speed
575 MHz
Flash1 Chip
GigaDevice GD25Q64CSIG
Flash1 Size
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip
Zentel A3R12E40DBF-AH
ETH chip1
MediaTek MT7688AN
Ethernet Port Count
1-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 80:3F:5D (1 E, 6 W)

Stock bootloader
U-Boot 1.1.3 Ralink v4.3.0.0
Stock FW OS
Linux 2.6.36
Expansion IF types
none specified
PoE
Passive
Power
24 VDC, 0.5 A
Connector type
Ethernet (PoE)
Serial Port (UART)
yes
Flags:
high power
Other

Default SSID: Wireless-N (6 addl. devices)
, Wireless-AC (3 addl. devices)
Default IP address: 192.168.10.1
the IP 192.168.10.1 is used by 115 additional devices
of which 2 are WAVLINK devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1331 additional devices
of which 2 are WAVLINK devices

Manuf/OEM/ODM
Retail
FCC approval date 10 January 2017
Radio 1
Chip1
MediaTek MT7688AN
Wireless interface OUI
80:3F:5D
Antenna Connector Type
RP-SMA
MIMO status
1x1:1
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 150 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio 2
Chip1
MediaTek MT7610E
Wireless interface OUI
80:3F:5D
Antenna Connector Type
RP-SMA
MIMO status
1x1:1
Wireless Standard
IEEE 802.11a/n/ac
802.11ac
up to 433 Mbps
802.11n
up to 150 Mbps
802.11a
up to 54 Mbps
WiFi Operating Frequency
5 GHz

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented WAVLINK device with specifications, see WAVLINK.

433 Mbps - 1SS 5GHz 802.11ac (80MHz chan.),
150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = AC600 class

Overview

Dissasembly

  • Detatch antenna, remove silicone grommet and unscew nut on RP-SMA connector
to slide the card out the bottom of the unit after removing the bottom cap.
There is a block of silicone thermal interface material over the CPU.

JTAG-Serial Info

Serial

Serial Pinouts

  • J1 is a serial header. Pinout on silkscreen, no holes just pads.
Connect with 57600/8/N/1 3.3v TTL
Root access without password on serial.

Console output

Boot log • >>
U-Boot 1.1.3 (Jun 24 2016 - 10:18:38)

Board: Ralink APSoC DRAM:  64 MB

relocate_code Pointer at: 83fb8000

flash manufacture id: c8, device id 40 17

find flash: GD25Q64B

*** Warning - bad CRC, using default environment

============================================ 

Ralink UBoot Version: 4.3.0.0

-------------------------------------------- 

ASIC 7628_MP (Port5<->None)

DRAM component: 512 Mbits DDR, width 16

DRAM bus: 16 bit

Total memory: 64 MBytes

Flash component: SPI Flash

Date:Jun 24 2016  Time:10:18:38

============================================ 

icache: sets:512, ways:4, linesz:32 ,total:65536

dcache: sets:256, ways:4, linesz:32 ,total:32768 


 ##### The CPU freq = 575 MHZ #### 

 estimate memory size =64 Mbytes

RESET MT7628 PHY!!!!!!

Please choose the operation: 

   1: Load system code to SDRAM via TFTP. 

   2: Load system code then write to Flash via TFTP. 

   3: Boot system code via Flash (default).

   4: Entr boot command line interface.

   7: Load Boot Loader code then write to Flash via Serial. 

   9: Load Boot Loader code then write to Flash via TFTP. 

You choosed 3

��� 0 

3: System Boot system code via Flash.

## Booting image at bc050000 ...

   Image Name:   Linux Kernel Image

   Image Type:   MIPS Linux Kernel Image (lzma compressed)

   Data Size:    4565528 Bytes =  4.4 MB

   Load Address: 80000000

   Entry Point:  8000c150

   Verifying Checksum ... OK

   Uncompressing Kernel Image ... OK

No initrd

## Transferring control to Linux (at address 8000c150) ...

## Giving linux memsize in MB, 64


Starting kernel ...

LINUX started...

 THIS IS ASIC
Linux version 2.6.36 (root@ubuntusvr1) (gcc version 4.6.3 
 (Buildroot 2012.11.1) ) #243 Thu Feb 16 13:55:26 CST 2017

 The CPU feqenuce set to 575 MHz

 MIPS CPU sleep mode enabled.
CPU revision is: 00019655 (MIPS 24Kc)
Software DMA cache coherency
Determined physical RAM map:
 memory: 04000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x00004000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00004000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: console=ttyS1,57600n8 root=/dev/ram0 console=ttyS0
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Primary instruction cache 64kB, VIPT, , 4-waylinesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Writing ErrCtl register=0007a431
Readback ErrCtl register=0007a431
Memory: 56840k/65536k available (3904k kernel code, 8696k reserved, 1035k data, 2884k init, 0k highmem)
NR_IRQS:128
console [ttyS1] enabled
Calibrating delay loop... 386.04 BogoMIPS (lpj=772096)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
RALINK_GPIOMODE = 570544d4 
RALINK_GPIOMODE = 570444d4 
***** Xtal 40MHz *****
start PCIe register access
RALINK_RSTCTRL = 2400000
RALINK_CLKCFG1 = fdbfffc0

*************** MT7628 PCIe RC mode *************
PCIE0 enabled
Port 0 N_FTS = 1b105000
init_rt2880pci done
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff]
pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
pci 0000:00:00.0: BAR 1: set to [mem 0x20200000-0x2020ffff] (PCI address [0x20200000-0x2020ffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff]
pci 0000:01:00.0: BAR 0: set to [mem 0x20000000-0x200fffff] (PCI address [0x20000000-0x200fffff]
pci 0000:01:00.1: BAR 0: assigned [mem 0x20100000-0x201fffff]
pci 0000:01:00.1: BAR 0: set to [mem 0x20100000-0x201fffff] (PCI address [0x20100000-0x201fffff]
pci 0000:00:00.0: PCI bridge to [bus 01-01]
pci 0000:00:00.0:   bridge window [io  disabled]
pci 0000:00:00.0:   bridge window [mem 0x20000000-0x201fffff]
pci 0000:00:00.0:   bridge window [mem pref disabled]
BAR0 at slot 0 = 0
bus=0x0, slot = 0x0
res[0]->start = 0
res[0]->end = 0
res[1]->start = 20200000
res[1]->end = 2020ffff
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
bus=0x1, slot = 0x0
res[0]->start = 20000000
res[0]->end = 200fffff
res[1]->start = 0
res[1]->end = 0
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
bus=0x1, slot = 0x0
res[0]->start = 20100000
res[0]->end = 201fffff
res[1]->start = 0
res[1]->end = 0
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
Switching to clocksource Ralink Systick timer
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
fuse init (API version 7.15)
msgmni has been set to 111
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered (default)
gpiomode one  0000  = 0x571444d0 
Ralink gpio driver initialized = 73
Ralink gpio driver initialized
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x10000d00 (irq = 21) is a 16550A
serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
brd: module loaded
flash manufacture id: c8, device id 40 17
Wavlink Encryption System...
Wavlink Encryption System is installing
GD25Q64B(c8 40170000) (8192 Kbytes)
mtd .name = raspi, .size = 0x00800000 (8M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
Creating 5 MTD partitions on "raspi":
0x000000000000-0x000000800000 : "ALL"
0x000000000000-0x000000030000 : "Bootloader"
0x000000030000-0x000000040000 : "Config"
0x000000040000-0x000000050000 : "Factory"
0x000000050000-0x000001000000 : "Kernel"
mtd: partition "Kernel" extends beyond the end of device "raspi" -- size truncated to 0x7b0000
rdm_major = 253
GMAC1_MAC_ADRH -- : 0x000080FF
GMAC1_MAC_ADRL -- : 0x5db783FF
Ralink APSoC Ethernet Driver Initilization. v3.1  512 rx/tx descriptors allocated, mtu = 1500!
GMAC1_MAC_ADRH -- : 0x000080FF
GMAC1_MAC_ADRL -- : 0x5db783FF
PROC INIT OK!
my_net_link_3: create netlink socket ok.
PPP generic driver version 2.4.2
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPTP driver version 0.8.5


=== pAd = c0147000, size = 1354720 ===

<-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
<-- RTMPAllocAdapterBlock, Status=0
RtmpChipOpsHook(492): Not support for HIF_MT yet!
mt7628_init()-->
mt7628_init(FW(8a00), HW(8a01), CHIPID(7628))
e2.bin mt7628_init(1133)::(2), pChipCap->fw_len(63888)
mt_bcn_buf_init(218): Not support for HIF_MT yet!
<--mt7628_init()
GACT probability on
Mirror/redirect action on
Simple TC action Loaded
netem: version 1.2
u32 classifier
    Performance counters on
    input device check on
    Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (888 buckets, 3552 max)
ctnetlink v0.93: registering with nfnetlink.
nf_conntrack_rtsp v0.6.21 loading
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
matchsize=264
xt_time: kernel timezone is -0000
IPVS: Registered protocols ()
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
IPVS: ipvs loaded.
GRE over IPv4 demultiplexor driver
gre: can't add protocol
nf_nat_rtsp v0.6.21 loading
ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Restricted Cone
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
L2TP core driver, V2.0
PPPoL2TP kernel driver, V2.0
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Warning: unable to open an initial console.
Freeing unused kernel memory: 2884k freed
Algorithmics/MIPS FPU Emulator v1.5
Welcome to
     __   ___  _____  _____   _  _______ ______  _____  _   ___
    |  \ /   ||  ___||  __ \ | ||  __  ||__  __||  ___|| | /  /
    |   ^    || |__  | |  \ \| || |  | |  | |   | |__  | |/  /
    |  | |   ||  ___|| |  | || || |__| |  | |   |  ___||    \
    |  | |   || |___ | |__/ /| ||  __  |  | |   | |___ | |\  \
    |__| |___||_____||_____/ |_||_|  |_|  |_|   |_____||_| \__\

		        = Everyday Genius =
		            
The timer is still in use...
Wavlink Encryption System is unlocked.
led=37, on=4000, off=1, blinks,=1, reset=1, time=4000
Password for 'admin' changed

##### disable 1st wireless interface #####

##### disable 2nd wireless interface #####
rmmod: MT7610_ap: No such file or directory
RootMacAddress:00:11:22:33:44:55


RootMacAddress:00:11:22:33:44:55


insmod: rt_timer.ko: module not found


=== pAd = c0782000, size = 1786192 ===

<-- RTMPAllocTxRxRingMemory, Status=0
<-- RTMPAllocAdapterBlock, Status=0
device_id =0x7650
==>MT76x0_WLAN_ChipOnOff(): OnOff:1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0xff000002
MACVersion = 0x76502000
TX_BCN DESC a285b000 size = 320
RX[0] DESC a285f000 size = 2048
RX[1] DESC a2862000 size = 1 GiB
E2pAccessMode=0
cfg_mode=9
cfg_mode=9
wmode_band_equal(): Band Equal!
AndesSendCmdMsg: Could not send in band command due to diable fRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
APSDCapable[0]=0
APSDCapable[1]=0
APSDCapable[2]=0
APSDCapable[3]=0
APSDCapable[4]=0
APSDCapable[5]=0
APSDCapable[6]=0
APSDCapable[7]=0
APSDCapable[8]=0
APSDCapable[9]=0
APSDCapable[10]=0
APSDCapable[11]=0
APSDCapable[12]=0
APSDCapable[13]=0
APSDCapable[14]=0
APSDCapable[15]=0
default ApCliAPSDCapable[0]=0
Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
load fw image from fw_header_image
AndesMTLoadFwMethod1(2174)::pChipCap->fw_len(63888)
FW Version:20151201
FW Build Date:20151201183641
CmdAddressLenReq:(ret = 0)
CmdFwStartReq: override = 1, address = 1048576
CmdStartDLRsp: WiFI FW Download Success
MtAsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
efuse_probe: efuse = 10000012
RtmpChipOpsEepromHook::e2p_type=2, inf_Type=4
RtmpEepromGetDefault::e2p_dafault=2
RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 2
NVM is FLASH mode
1. Phy Mode = 14
Country Region from e2p = ffff
tssi_1_target_pwr_g_band = 2
2. Phy Mode = 14
3. Phy Mode = 14
NICInitPwrPinCfg(11): Not support for HIF_MT yet!
NICInitializeAsic(651): Not support rtmp_mac_sys_reset () for HIF_MT yet!
mt_mac_init()-->
MtAsicInitMac()-->
mt7628_init_mac_cr()-->
MtAsicSetMacMaxLen(1241): Set the Max RxPktLen=1024!
<--mt_mac_init()
	WTBL Segment 1 info:
		MemBaseAddr/FID:0x28000/0
		EntrySize/Cnt:32/128
	WTBL Segment 2 info:
		MemBaseAddr/FID:0x40000/0
		EntrySize/Cnt:64/128
	WTBL Segment 3 info:
		MemBaseAddr/FID:0x42000/64
		EntrySize/Cnt:64/128
	WTBL Segment 4 info:
		MemBaseAddr/FID:0x44000/128
		EntrySize/Cnt:32/128
AntCfgInit(2893): Not support for HIF_MT yet!
MCS Set = ff 00 00 00 01
MtAsicSetChBusyStat(826): Not support for HIF_MT yet!
[PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0
[PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
MtAsicSetRalinkBurstMode(2919): Not support for HIF_MT yet!
MtAsicSetPiggyBack(763): Not support for HIF_MT yet!
reload DPD from flash , 0x9F = [c600] doReload bit7[0]
CmdLoadDPDDataFromFlash: Channel = 11, DoReload = 0
MtAsicSetTxPreamble(2898): Not support for HIF_MT yet!
CmdSlotTimeSet:(ret = 0)
MtAsicAddSharedKeyEntry(1308): Not support for HIF_MT yet!
MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xf0
Main bssid = 00:11:22:33:44:55
<==== rt28xx_init, Status=0
The 7628 UUID MacAddress = 00:11:22:33:44:55

The 7628 UUID MacAddress = 00:11:22:33:44:55

mt7628_set_ed_cca: TURN OFF EDCCA  mac 0x10618 = 0xd7083f0f, EDCCA_Status=0
WiFi Startup Cost (ra0): 0.892s
load fw spent 12ms
RX DESC a2a91000 size = 2048
RX1 DESC a2a92000 size = 2048
cfg_mode=14
cfg_mode=14
wmode_band_equal(): Band Not Equal!
1. Phy Mode = 49
2. Phy Mode = 49
ext_pa_current_setting = 1
3. Phy Mode = 49
AntCfgInit: primary/secondary ant 0/1
ChipStructAssign(): RALINK6590 hook !
bAutoTxAgcG = 0
MCS Set = ff 00 00 00 01
MT76x0_ChipBBPAdjust():rf_bw=2, ext_ch=3, PrimCh=40, HT-CentCh=38, VHT-CentCh=42
 result [0]!!
APStartUp(): AP Set CentralFreq at 42(Prim=40, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2)
Main bssid = 00:11:22:33:44:55
<==== rt28xx_init, Status=0
 result [0]!!
 result [0]!!
 result [0]!!
 result [0]!!
 result [0]!!
 result [0]!!
 result [0]!!
 result [0]!!
0x1300 = 00064300
RTMPDrvOpen(1):Check if PDMA is idle!
RTMPDrvOpen(2):Check if PDMA is idle!
The 7610 UUID MacAddress = 00:11:22:33:44:55

The 7610 UUID MacAddress = 00:11:22:33:44:55

The 7610 UUID MacAddress = 00:11:22:33:44:55

ifconfig: ioctl 0x8913 failed: No such device
brctl: bridge br0: No such device or address
##### configVIF #####
killall: wandaemRaeth v3.1 (on: no process kTaskletilled
)

phy_tx_ring = 0x02198000, tx_ring = 0xa2198000

phy_rx_ring0 = 0x0219a000, rx_ring0 = 0xa219a000
GMAC1_MAC_ADRH -- : 0x000080FF
GMAC1_MAC_ADRL -- : 0x5db783FF
RT305x_ESW: Link Status Changed  ======>>>>>
RT305x_ESW: Link Status Changed  ======>>>>>
p0 = 0 
p1 = 0 
p2 = 0 
p3 = 0 
p4 = 0 
hotplug 0


vconfig: ioctl error for rem: No such device
vconfig: ioctl error for rem: No such device
rmmod: 8021q: No such file or directory
device eth2 entered promiscuous mode
##### 999999 config Ralink ESW vlan partition (WLLLL) #####
##### config-vlan.sh 2 WLLLL config Ralink ESW vlan partition (WLLLL) #####
switch reg write offset=14, value=405555
switch reg write offset=50, value=2001
switch reg write offset=98, value=7f3f
switch reg write offset=e4, value=3f
switch reg write offset=40, value=1002
switch reg write offset=44, value=1001
switch reg write offset=48, value=1001
switch reg write offset=70, value=ffff417e
done.
device ra0 entered promiscuous mode
device eth2.1 entered promiscuous mode
device rai0 entered promiscuous mode

##### enable 2nd wireless interface #####
br0: port 3(rai0) entering learning state
br0: port 3(rai0) entering learning state
br0: port 2(eth2.1) entering learning state
br0: port 2(eth2.1) entering learning state
br0: port 1(ra0) entering learning state
br0: port 1(ra0) entering learning state
route: ioctl 0x890c failed: No such process
BusyBox v1.12.1 (2017-02-15 17:34:25 CST) multi-call binary

Usage: route [{add|del|delete}]

ifconfig: ioctl 0x8914 failed: Cannot assign requested address
ifconfig: ioctl 0x8914 failed: Cannot assign requested address
route: ioctl 0x890c failed: No such process
device eth2.2 entered promiscuous mode
br0: port 4(eth2.2) entering learning state
br0: port 4(eth2.2) entering learning state
ifconfig: ioctl 0x8913 failed: No such device
rm: cannot remove '/etc/radvd.conf': No such file or directory
/sbin/internet.sh: line 1271: long_loop: not found
route: ioctl 0x890c failed: No such process
Unknown option: -I
Unknown option: ra0
Jan  1 00:00:17 miniupnpd[1137]: WPS listening on port 7777

killall: rt2860apd: no process killed
Jan  1 00:00:17 miniupnpd[1137]: received signal 15, good-bye

br0: port 3(rai0) entering forwarding state
br0: port 2(eth2.1) entering forwarding state
br0: port 1(ra0) entering forwarding state
Unknown option: -I
Unknown option: ra0
Jan  1 00:00:17 miniupnpd[1472]: WPS listening on port 7777

killall: rtinicapd: no process killed
iptables v1.4.10: Couldn't load target `macipport_filter':File not found

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables v1.4.10: Couldn't load target `web_filter':File not found

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables v1.4.10: Couldn't load target `malicious_filter':File not found

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables v1.4.10: Couldn't load target `malicious_input_filter':File not found

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables v1.4.10: Couldn't load target `port_trigger':File not found

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables v1.4.10: Couldn't load target `trigger_prerouting':br0: port 4(eth2.2) entering forwarding state
File not found

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
sh: /bin/super_dmz: not found
iptables v1.4.10: Couldn't load target `port_forward':File not found

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables v1.4.10: Couldn't load target `DMZ':File not found

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
30
0
432000
0
sh: ddns.sh: not found
led=11, on=4000, off=1, blinks,=1, reset=1, time=4000
dut mac=00:11:22:33:44:55
Filter_State=1
led=5, on=4000, off=1, blinks,=1, reset=1, time=4000
led=4, on=4000, off=1, blinks,=1, reset=1, time=4000
0
webs: Listening for HTTP requests at address 10.10.0.225

QoSInit
warning, can't get bandwidth string from UI.
warning, can't get bandwidth string from UI.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
1970-01-01 00:00:21: (log.c.97) server started 
init: can't log to /dev/tty5

starting pid 3576, tty '/dev/ttyS1': '/bin/sh'


BusyBox v1.12.1 (2017-02-15 17:34:25 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

#


Pictures

User Images

See also