Ubiquiti Networks LiteStation2
From TechInfoDepot
Jump to navigationJump to searchbg | |
---|---|
Hi-Performance, Open Software, 2.4GHz Wireless Platform | |
![]() | |
Homepage | |
Support | |
Wikipedia | |
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt | |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Ubiquiti Networks LiteStation2 |
FCC ID | |
IC ID | |
Type |
CPE, access point |
Wireless class |
G54 |
CPU1 | |
CPU1 Type |
MIPS 4KEc |
CPU1 Speed |
180 MHz |
Flash1 Chip |
STMicro 25P32V6P |
Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Chip |
ESMT M12L128168A-7T |
ETH chip1 | |
Switch |
IC+ IP175C |
Ethernet Port Count |
2-100MbE-LAN |
Expansion IF types |
none specified |
PoE |
non-standard (otherwise unspecified) |
Power |
5-18 VDC, ? A |
Connector type |
barrel |
Serial Port (UART) |
yes, DE-9 |
JTAG Port |
yes |
Flags |
high power |
Other | |
Default IP address |
192.168.1.20 |
Default login user |
ubnt |
Default login password |
ubnt |
3rd Party Firmware Support | |
Retail | |
FCC approval date | 19 August 2006 |
Radio 1 | |
Chip1 | |
Wireless interface OUI |
00:15:6D |
Antenna Connector Type |
U.FL, MMCX |
Wireless Standard |
IEEE 802.11b/g |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented IC+ chipsets with specifications, see IC+.
Overview[edit]
Per Ubiquiti's datasheet...
- The dimensions of the board are ~ 106.7 mm (L) x 88.9 mm (W) x 15.24 (H).
UBNT's site specifies the usable DC voltage range as 5 to 24V. The box (of an older unit, probably) specifies the range as 5 to 18V w/ a warning not to exceed 18V.
Links of Interest[edit]
- On the OpenWrt wiki, w/ some additional info in the NanoStation entry
Flashing[edit]
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt[edit]
![]() | This section is empty. You can help by adding to it. (January 2021) |
Flashing OprnWrt[edit]
![]() | This section is empty. You can help by adding to it. (January 2021) |
Upgrading[edit]
![]() | This section is empty. You can help by adding to it. (January 2021) |
Reverting[edit]
![]() | This section is empty. You can help by adding to it. (January 2021) |
JTAG-Serial Info[edit]
![]() | This section is empty. You can help by adding to it. (January 2021) |
USB Info[edit]
![]() | This section is empty. You can help by adding to it. (January 2021) |
vlan Info[edit]
![]() | This section is empty. You can help by adding to it. (January 2021) |
Pictures[edit]
Notes[edit]
![]() | This section is empty. You can help by adding to it. (January 2021) |
Hardware Modification[edit]
![]() | This section is empty. You can help by adding to it. (January 2021) |
See also[edit]
![]() | This section is empty. You can help by adding to it. (January 2021) |
Categories:
- Ubiquiti Networks
- Embedded system/CPE
- Embedded system/access point
- Embedded System Atheros
- Embedded System AR2316A
- Embedded System MIPS
- Embedded System IC+
- Embedded System IP175C
- DD-WRT Supported
- OpenWrt Supported
- Embedded System IEEE 802.11b/g
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Atheros
- IC+
- Embedded System
- User Photo's Needed
- FCC Photo's Needed
- English Documentation