Top Global 3G Phoebus (MB6000)

From TechInfoDepot
Jump to navigationJump to search
bg (G54)
3G hotspot
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Status Unknown
Platform
BrandModelRev
Top Global MB6000
FCC ID
Type
3G hotspot
CPU1
CPU1 Type
MIPS BMIPS3300 (R1)
CPU1 Speed
216 MHz
Flash1 Chip
Intel TE28F640J3C-120
Flash1 Size
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip
GLT GLT5640L16-6TC x 2
ETH chip1
ETH chip2
Realtek Model?
Ethernet Port Count
1-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 00:0B:89 (1 E, 1 W)
Ethernet OUI: 00:0B:89 (1 E, 1 W)

Expansion IF types
none specified
Power
5 VDC, 4 A
Connector type
barrel
Other

Default SSID: topglobalXXXXXX (1 addl. devices)
Default IP address: 172.16.0.1
the IP 172.16.0.1 is used by 4 additional devices
of which 2 are Top Global devices
Default login user: public
Default login password: public
public:public credentials used by 3 additional devices
of which 2 are Top Global devices

Manuf/OEM/ODM
Gemtek WAPB-136G
Retail
FCC approval date 15 September 2005
ASIN B000SBIJKE Flag of the United States.svg
Country of manuf China
Radio 1
Chip1
Chip2
Broadcom BCM2050
Wireless interface OUI
00:0B:89
Antenna Connector Type
none specified
Wireless Standard
IEEE 802.11b/g
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio cor_rev
7

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

54 Mbps - 2.4GHz 802.11g = G54 class

Overview

There is a TI CardBus controller on-board.

The default SSID is topglobalXXXXXX where XXXXXX is the last 6 digits of the serial number.

Resetting the device to factory defaults

After the unit has booted and is broadcasting an SSID, hold the RELOAD button for 20 seconds (until the front lights turn amber). After the lights turn amber, press the RESET button.

Holding the reset button for 10 seconds after the device turns on will wipe the firmware on the device (it will require a reload via TFTP).

Links of Interest

User's Guide