Tenda AC9

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn+ac (AC1200)
AC1200 Smart Dual-Band Gigabit WiFi Router
Homepage
Support
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Status Unknown
Platform
BrandModelRev
Tenda AC9
FCC ID
IC ID
Board ID
10024325
Type
wireless router
CPU1
Broadcom BCM47189B0
CPU1 Type
ARM Cortex-A7
CPU1 Speed
900 MHz
Flash1 Chip
Winbond W25Q64FVSIG
Flash1 Size
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip
Winbond W631GG6KB-15
ETH chip1
Broadcom BCM47189B0
Switch
Broadcom BCM53125S
Ethernet Port Count
1-WAN
4-1GbE-LAN
Wired Standard
IEEE 802.3i/3u/3ab

802dot11 OUI: C8:3A:35 (21 E, 34 W)
Ethernet OUI: C8:3A:35 (21 E, 34 W)

Expansion IF types
USB 2.0
USB ports
1
USB Hub Compatible
Untested
Power
12 VDC, 2 A
Connector type
barrel
Serial Port (UART)
yes, 4-pin header, J1

Additional chips
2.4GHz Power Amplifier IC;Skyworks;SE2576L;SiGe, 2576L, 610JK;2;
5GHz SPDT Switch w/ LNA;Skyworks;SKY85606-11;606H, 4636;2;
5GHz Power Amplifier IC;Skyworks;SKY85728-11;SKY85728-11, UM5UK, 1527 MY;2;

Other

Default SSID: Tenda_XXXXXX (26 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 793 additional devices
of which 57 are Tenda devices

Manuf/OEM/ODM
Retail
FCC approval date 23 June 2016
(Est.) initial retail price (in USD): $40
Newegg N82E16833555068
ASIN B01COA6SNG Flag of the United States.svg
Country of manuf China
Radio 1
Chip1
Broadcom BCM47189B0
Wireless interface OUI
C8:3A:35
Antenna Connector Type
none specified
MIMO status
2x2:2
Wireless Standard
IEEE 802.11a/n/ac
802.11ac
up to 867 Mbps
802.11n
up to 300 Mbps
802.11a
up to 54 Mbps
WiFi Operating Frequency
5 GHz
Radio 2
Chip1
Broadcom BCM43217
Wireless interface OUI
C8:3A:35
Antenna Connector Type
none specified
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio cor_rev
24
 FCC ID
Medialink MLWR-AC1200V7TAC9
Nexxt Solutions Acrux 1200 (ARL02124U1)X4YACRX12K
V7TAC9
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
Tenda AC9BroadcomBroadcomBroadcom
Tenda AC9 v3RealtekRealtekRealtek

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Tenda device with specifications, see Tenda.

867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.),
300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AC1200 class


Overview

"10024325 V1.4" is silkscreened on the board in the photos.

Disassembly

  • Remove two philips screws in the back.
  • Remove the stand, if attached. You'll need to apply pressure
to the inner two clips to get them to unlatch; do so with a
screwdriver inserted through holes in bottom of foot.
  • You'll then need a set of spudgers or other thin/stiff plastic
to pry the two halves of the case apart. I broke about half the
clips opening mine, but the screws and remaining clips are
enough to hold the case together.

Links of Interest

Reviews

JTAG-Serial Info

Serial

Serial Pinouts

3.3V (115200, 8N1) - labeled J1. See PCB pic below.

1 2 3 4
+3.3V Tx Rx GND


Boot log

Boot log
Decompressing...done
Found ST compatible serial flash with 128 64KB blocks; total size 8MB


CFE version 9.10.178.27 (r584393) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Fri Apr  8 10:42:02 CST 2016 (root@linux-svzy-cj)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
DDR Clock: 533 MHz
Info: DDR frequency set from clkfreq=900,*533*
bcm_robo_enable_switch: EEE is disabled
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 9.10.178.27 (r584393)
CPU type 0x0: 900MHz
Tot mem: 131072 KBytes

CFE mem:    0x00F00000 - 0x017A3504 (9057540)
Data:       0x00F6B8A8 - 0x00F6BEE0 (1592)
BSS:        0x00F6BEF0 - 0x00FA1504 (218644)
Heap:       0x00FA1504 - 0x017A1504 (8388608)
Stack:      0x017A1504 - 0x017A3504 (8192)
Text:       0x00F00000 - 0x00F5F76C (391020)
Boot:       0x017A4000 - 0x017E4000
Reloc:      I:00000000 - D:00000000

Mac:c8-3a-35-e-21-80 
Device eth0:  hwaddr C8-3A-35-0E-21-80, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
upgrade wait time is 3s
**upgrade_wait over!
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .... 4133088 bytes read
Entry at 0x00008000
Closing network.
Starting program at 0x00008000
[    0.790000] console [ttyS0] enabled, bootconsole disabled
[    0.810000] brd: module loaded
[    0.810000] loop: module loaded
[    0.820000] pflash: found no supported devices
[    0.820000] bcmsflash: squash filesystem found at block 28
[    0.830000] Creating 7 MTD partitions on "bcmsflash":
[    0.830000] 0x000000000000-0x000000800000 : "All"
[    0.840000] 0x000000000000-0x000000040000 : "Bootloader"
[    0.840000] 0x000000040000-0x0000007d0000 : "KernelFS"
[    0.850000] 0x0000001ce6b8-0x0000007d0000 : "rootfs"
[    0.850000] 0x0000007d0000-0x0000007e0000 : "CFM_BACKUP"
[    0.860000] 0x0000007e0000-0x0000007f0000 : "CFM"
[    0.860000] 0x0000007f0000-0x000000800000 : "nvram"
[    0.870000] nflash: found no supported devices
[    0.870000] PPP generic driver version 2.4.2
[    0.880000] PPP Deflate Compression module registered
[    0.880000] PPP BSD Compression module registered
[    0.890000] PPP MPPE Compression module registered
[    0.890000] NET: Registered protocol family 24
[    0.890000] Initializing USB Mass Storage driver...
[    0.900000] usbcore: registered new interface driver usb-storage
[    0.900000] USB Mass Storage support registered.
[    0.910000] u32 classifier
[    0.910000]     Actions configured
[    0.910000] Netfilter messages via NETLINK v0.30.
[    0.920000] nf_conntrack version 0.5.0 (1962 buckets, 7848 max)
[    0.920000] [BM CORE     ]  INFO: online ip data hash table created, size = 199
[    0.930000] [BM CORE     ]  INFO: online_ip proc file created
[    0.930000] ctnetlink v0.93: registering with nfnetlink.
[    0.940000]  create /proc/behavior/emailbcc SUCCESSFULLY.
[    0.940000] netfilter smtp init successfully
[    0.950000] xt_time: kernel timezone is -0000
[    0.950000] Kernel:Init flow dev success.
[    0.950000] IPv4 over IPv4 tunneling driver
[    0.960000] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.960000] TCP cubic registered
[    0.960000] NET: Registered protocol family 17
[    0.970000] L2TP core driver, V2.0
[    0.970000] PPPoL2TP kernel driver, V2.0
[    0.970000] L2TP IP encapsulation support (L2TPv3)
[    0.980000] L2TP netlink interface
[    0.980000] L2TP ethernet pseudowire support (L2TPv3)
[    0.980000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[    0.990000] All bugs added by David S. Miller <davem@redhat.com>
[    1.040000] Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
[    1.050000] brcmnand: found no supported devices
[    1.060000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[    1.070000] devtmpfs: mounted
[    1.070000] Freeing init memory: 192K
[    1.080000] Failed to execute /sbin/preinit.  Attempting defaults...
mkdir: can't create directory '/var/run': File exists
[    3.040000] _fastnat_attach: fastnat attach is successful  register.
[    3.040000] fastnat_init: FastNat_init successful .
[    3.180000] [BM CORE     ]  INFO: bm_init success
[    3.180000] bm_debug_init_proc success!
[    3.180000] [U2K MODULE  ]  INFO: bm_u2k_info_init success
insmod: can't read '/lib/modules/ai.ko': No such file or directory
[    3.260000] [MAC FILTER  ]  INFO: bm_mac_filter init success 
[    3.360000] [QOS         ]  INFO: qos module init success
[    3.510000] OS TYPE INIT FINISHED
[    3.510000] [URL FILTER  ]  INFO: url filter init success
[    3.660000] jnl: driver (UFSD_HEAD lke_9.3.0_r275703_b4, LBD=ON) loaded at 7f03b000
[    4.060000] ufsd: module license 'Commercial product' taints kernel.
[    4.070000] Disabling lock debugging due to kernel taint
[    4.090000] ufsd: driver (UFSD_HEAD lke_9.3.0_r275703_b4, paragon, acl, ioctl, sd2(5), tr, nolazy) loaded at 7f04a000
[    4.090000] NTFS (journal support) included
[    4.090000] Build_for__Tenda_AC9_k2.6.36_2016-05-06_lke_9.3.0_r275703_b4
[    4.090000]  Evaluation copy - not for resale! 
Give root password for system maintenance
(or type Control-D for normal startup):[    4.510000] udevd (414): /proc/414/oom_adj is deprecated, please use /proc/414/oom_score_adj instead.

######## STARTING PROGRAM #########
init_core_dump 1791: rlim_cur = 0, rlim_max = -1
init_core_dump 1800: open core dump success
init_core_dump 1809: rlim_cur = 5242880, rlim_max = 5242880
func:InitCfm begin load_mib....
flash_read:ret = 65536
crc = 9d7dea62, newcrc = 9d7dea62
flash_read:ret = 65536
crc = 54618566, newcrc = 54618566
flash_read:ret = 65536
crc = 9d7dea62, newcrc = 9d7dea62
flash_to_file:open Policy failed.
going to rewrite flash...
open /etc/policy_bak.cfg failed.
rewrite flash ok...
failure to open policy source: /etc/policy.cfg
left wan[0]:0
left lan[0]:1
left lan[1]:2
left lan[2]:3
left lan[3]:4
vlan_array[0]: value 1  index_num 1 name eth1 cpu_port 5index[0] 0  index[1] 0  index[2] 0  index[3] 0  index[4] 0  
vlan_array[1]: value 0  index_num 4 name eth0 cpu_port 8index[0] 1  index[1] 2  index[2] 3  index[3] 4  index[4] 0  
vlan_array[2]: value -2  index_num 0 name  cpu_port 0index[0] 0  index[1] 0  index[2] 0  index[3] 0  index[4] 0  
vlan_array[3]: value -2  index_num 0 name  cpu_port 0index[0] 0  index[1] 0  index[2] 0  index[3] 0  index[4] 0  
vlan_array[4]: value -2  index_num 0 name  cpu_port 0index[0] 0  index[1] 0  index[2] 0  index[3] 0  index[4] 0  
nvram unset vlan1ports
nvram unset vlan2ports
nvram unset vlan3ports
nvram unset vlan4ports
nvram unset vlan5ports
nvram set vlan2ports="0  5*"
nvram set vlan1ports="1  2  3  4  8*"
#IPTV STB VLAN I[    5.290000] zzj++:cmd:GPIO_IOC_REG_USB_LED
D mode is disable!#
main=>100:init server success.1..
No need to start gpio thread.
[    5.380000] et_module_init: passivemode set to 0x0
[    5.380000] et_module_init: txworkq set to 0x0
[    5.390000] et_module_init: et_txq_thresh set to 0xce4
[    5.390000] et_module_init: et_rxlazy_timeout set to 0x3e8
[    5.400000] et_module_init: et_rxlazy_framecnt set to 0x20
[    5.480000] stbport=4=wanport=0=
[    5.490000] bcm_robo_enable_switch: EEE is disabled
[    5.500000] eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 9.10.178.27 (r584393)
[    5.520000] eth1: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 9.10.178.27 (r584393)
insmod: can't read '/lib/modules/2.6.36.4brcmarm/kernel/drivers/net/proxyarp/proxyarp.ko': No such file or directory
[    7.280000] wl_module_init: passivemode set to 0x0
[    7.280000] wl_module_init: txworkq set to 0x0
[    7.310000] External imprecise Data abort at addr=0x88e2a31c, fsr=0x1c06, pc=0x801f7700 lr=0x801fdc2c ignored.
[    7.320000] External imprecise Data abort at addr=0x88e2a31c, fsr=0x1c06, pc=0x7f1c50c0 lr=0x801fdc2c ignored.
[    7.340000] eth2: Broadcom BCM43c8 802.11 Wireless Controller 9.10.178.27 (r584393 WLTEST)
[    7.350000] PCI: Enabling device 0001:01:00.0 (0140 -> 0142)
[    7.390000] eth3: Broadcom BCM43227 802.11 Wireless Controller 9.10.178.27 (r584393 WLTEST)
insmod: can't read '/lib/modules/2.6.36.4brcmarm/kernel/drivers/usb/core/usbcore.ko': No such file or directory
[    7.450000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.460000] ehci_hcd 0000:00:04.1: EHCI Host Controller
[    7.460000] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[    7.500000] ehci_hcd 0000:00:04.1: irq 36, io mem 0x18004000
[    7.520000] ehci_hcd 0000:00:04.1: USB 0.0 started, EHCI 1.00
[    7.520000] hub 1-0:1.0: USB hub found
[    7.550000] hub 1-0:1.0: 2 ports detected
add
[    7.630000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
add
[    7.660000] ohci_hcd 0000:00:04.0: OHCI Host Controller
[    7.660000] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
[    7.680000] ohci_hcd 0000:00:04.0: irq 36, io mem 0x1800d000
[    7.740000] hub 2-0:1.0: USB hub found
[    7.740000] hub 2-0:1.0: 2 ports detected
add
insmod: can't read '/lib/modules/2.6.36.4brcmarm/kernel/drivers/usb/storage/usb-storage.ko': No such file or directory
insmod: can't read '/lib/modules/2.6.36.4brcmarm/kernel/drivers/usb/class/usblp.ko': No such file or directory
add
insmod: can't read '/lib/modules/2.6.36.4brcmarm/kernel/drivers/usb/host/xhci-hcd.ko': No such file or directory
[    7.890000] Hello,This is the USB LED handling Driver
[    7.890000] >>si_gpioreserve : 0xffffffff
[    7.890000] >>si_gpiocontrol : 0x0
[    7.900000] >>si_gpioouten : 0x8506
[    7.900000] >>si_gpioout : 0x8106
insmod: can't insert '/lib/modules/ufsd.ko': File exists
sh: can't create /proc/irq/163/smp_affinity: nonexistent directory
sh: can't create /proc/irq/169/smp_affinity: nonexistent directory
ifconfig: SIOCSIFHWADDR: No such device
ifconfig: SIOCGIFFLAGS: No such device
### set br0 mac [c8:3a:35:0e:21:80]### [5]
##############add vlan devices [vconfig add eth1 2]
##############add vlan devices [vconfig add eth0 1]
[    8.200000] device eth1 entered promiscuous mode
ifconfig: SIOCSIFHWADDR: No such device
[    8.290000] device vlan1 entered promiscuous mode
[    8.300000] device eth0 entered promiscuous mode
[    8.320000] br0: topology change detected, propagating
[    8.320000] br0: port 1(vlan1) entering forwarding state
[    8.330000] br0: port 1(vlan1) entering forwarding state
[    8.350000] IPv4 FIB: Using LC-trie version 0.409
Sun May  1 00:00:00 UTC 2011
Loading dnrd...
killall: dnrd: no process killed
_eval 98: child process create success
_eval 98: child process create success
_start_time_check 202: time_check register success, register_pid = 575
_eval 94: child process status is 0
_start_httpd 219: httpd register success, register_pid = 576
_eval 94: child process status is 0
_start_multiwan 259: _start_multiwan register success, register_pid = 577
multiWAN
httpd
time_check
netctrl
_eval 94: child process status is 0
_start_ucloud_v2 312: ucloud_v2 register success, register_pid = 578
_eval 94: child process status is 0
_start_buisness_proc 336: buisness_proc register success, register_pid = 579
business_proc
ucloud_v2
�[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(51)]:�[m		 enable:0
�[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(52)]:�[m		 type:1
�[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(57)]:�[m		 wday_en:1;1;1;1;1;1;1
�[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(58)]:�[m		 start_time:03:00
�[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(59)]:�[m		 end_time:05:00
�[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(60)]:�[m		 max_speed:3
�[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(61)]:�[m		 check_speed=3000
�[1;32m[TIMER_CHECK >>time_check_reboot_info_printf(62)]:�[m		 wan_ifnames:vlan2
�[1;32m[TIMER_CHECK >>time_check_power_info_printf(48)]:�[m		 enable:0
�[1;32m[TIMER_CHECK >>time_check_power_info_printf(49)]:�[m		 type:1
�[1;32m[TIMER_CHECK >>time_check_power_info_printf(54)]:�[m		 wday_en:1;1;1;1;1;1;1
�[1;32m[TIMER_CHECK >>time_check_power_info_printf(55)]:�[m		 start_time:00:00
�[1;32m[TIMER_CHECK >>time_check_power_info_printf(56)]:�[m		 end_time:07:00
�[1;32m[TIMER_CHECK >>time_check_power_info_printf(57)]:�[m		 max_speed:3
�[1;32m[TIMER_CHECK >>time_check_power_info_printf(58)]:�[m		 check_speed=3000
wl2g_op:0 wl5g_op:0 
logserver.c check network 192.168.0.1 success
init_core_dump 1791: rlim_cur = 5242880, rlim_max = 5242880
init_core_dump 1800: open core dump success
init_core_dump 1809: rlim_cur = 5242880, rlim_max = 5242880
init_core_dump 1791: rlim_cur = 5242880, rlim_max = 5242880
init_core_dump 1800: open core dump success
init_core_dump 1791: rlim_cur = 5242880, rlim_max = 5242880
init_core_dump 1800: open core dump success
init_core_dump 1809: rlim_cur = 5242880, rlim_max = 5242880
init_core_dump 1809: rlim_cur = 5242880, rlim_max = 5242880


Yes:

      ****** WeLoveLinux****** 

 Welcome to ...
######## RECEIVING DATA #########
create socket  fail -1
[httpd][debug]----------------------------webs.c,157
httpd listen ip = 192.168.0.1 port = 80
webs: Listening for HTTP requests at address 192.168.0.1
RTNETLINK answers: Operation not supported
sh: can't create /proc/br0_ip: nonexistent directory
[   10.860000] max_new_conntrack=4000 
sh: nkgw: not found
Debug->tpi_port.c: tpi_port_handle(61)--type = 0
Debug->tpi_port.c: tpi_port_mode_set(12)--wan_num=1
Debug->tpi_port.c: tpi_port_mode_set(14)--wan[0].portmode=0
set port 0 to AUTO
�[1;32m[ DEBUG ] �[m******Sucessed to change lan config! ******
killall: dhttpd: no process killed
not need to write flash,crc:[e20dc594]
commit cfm failed or not need write flash
not need to write flash,crc:[e20dc594]
commit cfm failed or not need write flash
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `dmz_forward_pre':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
********************************
	goahead  3.3.0 start
********************************
goahead: 4: main----51

goahead: 4: initPlatform----398

goahead: 4: websOpen----232

iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `vpnserver':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `dmz_forward_post':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
iptables: Index of insertion too big.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `port_forward_pre':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables v1.4.12.2: Couldn't load target `port_forward_post':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
goahead: 0: Can't get host address for host Tenda: errno 97, use Local:127.0.0.1iptables: No chain/target/match by that name.

cgi/main.c check network 192.168.0.2 success
dlan_ip:192.168.0.2
endpoint[http://192.168.0.2:80]
iptables v1.4.12.2: Couldn't load target `web_wanadmin':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `web_wanadmin':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
killall: 3322ip: no process killed
killall: 88ip: no process killed
killall: gnway: no process killed
iptables v1.4.12.2: Couldn't load target `icmp_drop':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
Error: argument "xmain" is wrong: invalid table ID

Error: argument "xmain" is wrong: invalid table ID

RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
iptables v1.4.12.2: Couldn't load target `access_ctrl':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
killall: inadyn: no process killed
iptables: No chain/target/match by that name.
rm: can't remove '/etc/ddns_*': No such file or directory
nbns task start:
arp task satrt:
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `MINIUPNPD':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
RTNETLINK answers: No such file or directory
dhcpsCfgToStruct 555: lan type i[   16.980000] [QOS         ]  INFO: g_qos_enable = disable
s 
dhcps_lan_dhcpc_configure 272: lan dhcp client not get ip
[   17.030000] Init gsbmac dev success.
[   17.030000] The ARP attack defence is init v1 successful
killall: arpbrocast: no process killed
[   17.090000] Kernel:Init attack fence dev success.
[   17.100000] the ddos ip attack defnence init successful
[   17.110000] SET_LAN_PARAM_DATA k_data:
[   17.110000] 	lan ip:3232235521
[   17.110000] 	lan mask:4294967040
[   17.120000] 	lan submask:3232235520
[   17.120000] 	lan interface:br0
[   17.120000] 	lan http port:80
icmp is 1,1500,u[   17.130000] set the proceee ture
dp is 1,1500,tcp[   17.130000] SET_IPOP_FENCE_ATTACK_DATA k_data:
_syn is 1,1500
[   17.140000] 	ip options:32512
[   17.140000] SET_BAD_PKT_FENCE_ATTACK_DATA k_data:
[   17.140000] 	bad pkt:248
[   17.150000] SET_DDOS_FENCE_ATTACK_DATA k_data:
[   17.150000] 	status:7
[   17.150000] 	tcp threshold:1500
[   17.160000] 	udp threshold:1500
[   17.160000] 	icmp threshold:1500
---------->>[ start_wifi, wl_rate=24 ]
30667310
killall: wps_monitor: no process killed
killall: nas: no process killed
killall: eapd: no process killed
�[1;32m[ DEBUG ] �[mlen=0,lan1_ifnames =
�[1;31m[ ERROR ] �[mDo not exsit ifname of guest_network,do nothing!
killall: acsd: no process killed
CJ+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++set wl1 value = auto
[   17.900000] CJ++ init gpioouten in hw_init status 1
[   17.930000] low power set pwr_percent 86
[   17.940000] low power set pwr_percent 86
eth3: cmd=231: Invalid argument
eth3: WLC_SET_VAR(chanspec): Invalid argument
eth3: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth3: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth3: WLC_SET_VAR(ampdu_ret[   18.040000] CJ++ init gpioouten in hw_init status 1
ry_limit_tid): Operation not supported
eth3: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth3: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth3: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth3: WLC_SET_V[   18.070000] low power set pwr_percent 86
AR(ampdu_retry_l[   18.070000] low power set pwr_percent 86
imit_tid): Operation not supported
eth3: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth3: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth3: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supporte[   18.090000] device eth3 entered promiscuous mode
d
eth3: WLC_SET[   18.100000] br0: topology change detected, propagating
_VAR(ampdu_rr_re[   18.100000] br0: port 2(eth3) entering forwarding state
try_limit_tid): [   18.110000] br0: port 2(eth3) entering forwarding state
Operation not supported
eth3: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth3: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth3: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth3: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth3: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth3: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported
eth3: WLC_SET_VAR(taf): Operation not supported
Invalid instance identifier br0

eth2: WLC_GET_VAR(psta_if): Invalid argument
eth2: WLC_GET_VAR(psta_if): Invalid argument
�[1;32m[ DEBUG ] �[mlen=0,lan1_ifnames =
�[1;31m[ ERROR ] �[mDo not exsit ifname of guest_network,do nothing!
===name(eth2) unit(0)===
td_acs >>td_acs_init_dev_name(2972): ifname eth2: radio is on
td_acs >>td_acs_init_dev_name(2982): ifname eth2: auto channel is enable
===name(eth3) unit(1)===
td_acs >>td_acs_init_dev_name(2972): ifname eth3: radio is on
td_acs >>td_acs_init_dev_name(2982): ifname eth3: auto channel is enable
td_acs >>td_acs_init_cfg(594): set invalid ch:12
td_acs >>td_acs_init_cfg(594): set invalid ch:13
td_acs >>td_acs_init_cfg(610): noise_th=(-88, -65) busy_th=(20, 73) loop(1) cs_timer(900s)
eth2: WLC_GET_VAR(bw_cap): Invalid argument
td_acs >>td_acs_init_rsi(654): failed to get bw_capret code: -1
td_acs >>td_acs_info_init(735): dev(eth2) acs_init_rsi fail
====td_acs_exit[   18.430000] low power set pwr_percent 86
====
[   18.510000] wisp or APC is close 
---------->>[ start_wifi, wl_rate=5 ]
30667310
�[1;31m[ ERROR ] �[mcoutry_code=US
�[1;32m[ DEBUG ] �[mlen=0,lan1_ifnames =
�[1;31m[ ERROR ] �[mDo not exsit ifname of guest_network,do nothing!
killall: acsd: no process killed
CJ+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++set wl0 value = auto
[   19.020000] CJ++ init gpioouten in hw_init status 1
mdns task start:
eth2: cmd=231: Invalid argument
eth2: WLC_SET_VAR(chanspec): Invalid argument
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_[   19.140000] CJ++ init gpioouten in hw_init status 1
VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Oper[   19.210000] device eth2 entered promiscuous mode
ation not suppor[   19.220000] br0: topology change detected, propagating
ted
eth2: WLC_S[   19.220000] br0: port 3(eth2) entering forwarding state
ET_VAR(ampdu_rr_[   19.230000] br0: port 3(eth2) entering forwarding state
retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported
eth2: WLC_SET_VAR(taf): Operation not supported
eth2: cmd=64: Operation not supported
Invalid instance identifier br0

device br1 already exists; can't create bridge with the same name
�[1;32m[ DEBUG ] �[mlen=0,lan1_ifnames =
�[1;31m[ ERROR ] �[mDo not exsit ifname of guest_network,do nothing!
===name(eth2) unit(0)===
td_acs >>td_acs_init_dev_name(2972): ifname eth2: radio is on
td_acs >>td_acs_init_dev_name(2982): ifname eth2: auto channel is enable
===name(eth3) unit(1)===
td_acs >>td_acs_init_dev_name(2972): ifname eth3: radio is on
td_acs >>td_acs_init_dev_name(2982): ifname eth3: auto channel is enable
td_acs >>td_acs_init_cfg(594): set invalid ch:12
td_acs >>td_acs_init_cfg(594): set invalid ch:13
td_acs >>td_acs_init_cfg(610): noise_th=(-88, -65) busy_th=(20, 73) loop(1) cs_timer(900s)
td_acs >>td_acs_init_rsi(662): band_type:1 bw_cap: 7 coex_enb:1
td_acs >>td_acs_init_width_level(712): Width level: 5g_80=40, 5g_40=73.
Interface eth2 scan channels: 36, 40, 44, 48, 149, 153, 157, 161, 165  
===td_acs_scan_timer_func==(eth2)==
td_acs >>td_acs_scan_timer_func(2083): band_type:1 bw_cap: 7 coex_enb:1
td_acs_scan_prep: passive_time=250
td_acs >>td_acs_scan_prep(790): scan channel number: 25
td_acs >>td_acs_scan_prep(793): params size: 114
td_acs: (eth2) scan in progress ...
###fd failed to recv packet!###
##### NO SERVER FOUND! #####
td_acs: (eth2) scan in progress ...
td_acs: (eth2) scan in progress ...
td_acs: (eth2) scan in progress ...
[   20.410000] low power set pwr_percent 82
td_acs: (eth2) scan in progress ...
[   20.670000] low power set pwr_percent 82
td_acs: (eth2) scan in progress ...
[   20.930000] low power set pwr_percent 82
td_acs: (eth2) scan in progress ...
[   21.190000] low power set pwr_percent 82
td_acs: (eth2) scan in progress ...
[   21.450000] low power set pwr_percent 82
td_acs: (eth2) scan in progress ...
td_acs >>td_acs_get_scan(974): list->count: 0, list->buflen: 12
td_acs >>td_acs_adjust_second_chan(1723): ctrl_ch:40 middle: 0=38 1=42
td_acs >>td_acs_adjust_second_chan(1747): selected mid: 0=38
td_acs >>td_acs_adjust_second_chan(1758): Final selected chanspec: 0xd926
td_acs >>td_acs_run_scan_select(2015): [AUTO_CHANNEL] select chanspec d926(#40)
td_acs: [2011/05/01 00:00:13]: WiFi 5G(eth2) bandwidth change from 40MHz to 80MHz, reason busy=0
td_acs >>td_acs_adjust_bandwidth(1956): Last adjust bandwidth chanspec is 0xe12a(#40).
td_acs: selected_chspec=0xe12a
td_acs >>td_acs_init_cfg(594): set invalid ch:12
td_acs >>td_acs_init_cfg(594): set invalid ch:13
td_acs >>td_acs_init_cfg(610): noise_th=(-88, -65) busy_th=(20, 73) loop(1) cs_timer(900s)
td_acs >>td_acs_init_rsi(662): band_type:2 bw_cap: 3 coex_enb:1
td_acs >>td_acs_init_width_level(695): Width level: 2g_40=3, 2g_20=26.
Interface eth3 scan channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11  
===td_acs_scan_timer_func==(eth3)==
td_acs >>td_acs_scan_timer_func(2083): band_type:2 bw_cap: 3 coex_enb:1
td_acs_scan_prep: passive_time=250
td_acs >>td_acs_scan_prep(790): scan channel number: 11
td_acs >>td_acs_scan_prep(793): params size: 86
td_acs: (eth3) scan in progress ...
[   22.250000] low power set pwr_percent 80
td_acs: (eth3) scan in progress ...
[   22.510000] low power set pwr_percent 80
td_acs: (eth3) scan in progress ...
[   22.770000] low power set pwr_percent 80
td_acs: (eth3) scan in progress ...
[   23.030000] low power set pwr_percent 80
td_acs: (eth3) scan in progress ...
[   23.290000] low power set pwr_percent 80
td_acs: (eth3) scan in progress ...
[   23.550000] low power set pwr_percent 86
[   23.620000] low power set pwr_percent 80
td_acs: (eth3) scan in progress ...
[   23.880000] low power set pwr_percent 80
td_acs: (eth3) scan in progress ...
[   24.140000] low power set pwr_percent 80
td_acs: (eth3) scan in progress ...
[   24.400000] low power set pwr_percent 80
td_acs: (eth3) scan in progress ...
[   24.660000] low power set pwr_percent 86
td_acs: (eth3) scan in progress ...
[   24.920000] low power set pwr_percent 86
td_acs >>td_acs_[   25.090000] low power set pwr_percent 80
get_scan(974): list->count: 15, list->buflen: 4700
td_acs >>td_acs_run_scan_select(2015): [AUTO_CHANNEL] select chanspec 1002(#2)
td_acs >>td_acs_adjust_bandwidth(1956): Last adjust bandwidth chanspec is 0x1002(#2).
td_acs: selected_chspec=0x1002
[   25.140000] wisp or APC is close 
msg str: [cfm Post time_check 4?relate_module_id=19,string_info=first_time_start]
�[1;31m[TIMER_CHECK >>init_time_check_module_var(146)]:�[mkey = relate_module_id,value = 19
�[1;31m[TIMER_CHECK >>init_time_check_module_var(154)]:�[mkey = string_info,value = first_time_start
tpi_sntp_handle(99): start sntp...
tpi_set_user_policy,35: entry count:0
�[1;32m[ DEBUG ] �[mlan dhcp not[   25.470000] [MAC FILTER  ]  INFO: g_mac_filter_enable = disable, mf_default_action = accept
 enable
[   25.490000] [URL FILTER  ]  INFO: g_uf_enable = disable
[   25.490000] [MAC FILTER  ]  INFO: g_mac_filter_enable = disable, mf_default_action = accept
systime_server =[   25.500000] [URL FILTER  ]  INFO: g_uf_enable = disable
 211.138.200.208
main,335,sntp_en =1,tz=7.00,checktime=1800
Disk:the file was locked.
Writesamba.config.bak OK!
Disk:/tmp/samba/lib/samba.config.bak the file was unlocked.
******* unlink /tmp/smbpasswd is fail 
Open /tmp/UDiskname is Failuser [admin] set passwd [admin].
�[1;32m[ DEBUG ] �[m*****netctrl init module entries ok.*****
upnp service is disabled!
miniupnpd.c,865,ver=1.0,osname=Wireless Router,osver=1.0,osurl=http://192.168.0.1,manuft=Tenda,descri=
Error reading configuration file /etc/miniupnpd.config
Usage:
	miniupnpd [-f config_file] [-i ext_ifname] [-o ext_ip]
		[-a listening_ip] [-p port] [-d] [-L] [-U] [-S] [-N]
		[-u uuid] [-s serial] [-m model_number] 
		[-t notify_interval] [-P pid_filename]
		[-B down up] [-w url]

Notes:
	There can be one or several listening_ips.
	Notify interval is in seconds. Default is 30 seconds.
	Default pid file is /var/run/miniupnpd.pid.
	With -d miniupnpd will run as a standard program.
	-L sets packet log in pf and ipf on.
	-S sets "secure" mode : clients can only add mappings to their own ip
	-U causes miniupnpd to report system uptime instead of daemon uptime.
	-B sets bitrates reported by daemon in bits per second.
	-w sets the presentation url. Default is http address on port 80
create socket  fail -1
create socket  fail -1
sh: u_yunsafe: not found
===td_acs_run_scan_mark==(eth2) mark:0==
===td_acs_run_scan_mark==(eth3) mark:0==
===td_acs_scan_timer_func==(eth2)==
...


Pictures

User Images