Tenda AC10

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn+ac (AC1200)
AC1200 MU-MIMO Dual Band Gigabit Wi-Fi Router
Homepage
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Tenda AC10 v1.1
FCC ID
IC ID
Board ID
10033208
Type
wireless router
CPU1
Realtek RTL8197FS
CPU1 Type
MIPS 24Kc
CPU1 Speed
1.0 GHz
Flash1 Chip
Winbond W25Q64VSIG
Flash1 Size
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip
Realtek RTL8197FS
ETH chip1
Realtek RTL8197FS
Switch
Realtek RTL8367RB
Ethernet Port Count
1-WAN
3-1GbE-LAN
Wired Standard
IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Expansion IF types
none specified
Power
12 VDC, 1 A
Connector type
barrel
Serial Port (UART)
yes, 4-pin header

Additional chips
2.4GHz Power Amplifier IC;Richwave;RTC6691H;701, 691H, 749;2;
5GHz Power Amplifier IC;Richwave;xxx;;2;

Other

Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 793 additional devices
of which 57 are Tenda devices

Manuf/OEM/ODM
Retail
FCC approval date 13 December 2017
ASIN B00ES6ZQ7O Flag of the United States.svg
Country of manuf China
Physical
Dimensions
8.6 x 5.5 x 1.9 inches
Weight
12.3 ounces
Radio 1
Chip1
Realtek RTL8197FS
Wireless interface OUI
none specified
Antenna Connector Type
U.FL
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio 2
Chip1
Realtek RTL8812BR
Wireless interface OUI
none specified
Antenna Connector Type
U.FL
MIMO status
2x2:2
Wireless Standard
IEEE 802.11a/n/ac
802.11ac
up to 867 Mbps
802.11n
up to 300 Mbps
802.11a
up to 54 Mbps
WiFi Operating Frequency
5 GHz
 FCC ID
Tenda AC10UV7TAC10
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
Tenda AC10RealtekRealtekRealtek
Tenda AC10URealtekRealtekRealtek

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented Tenda device with specifications, see Tenda.

867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.),
300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AC1200 class

Overview

"V1.1" and "10033208" is silkscreened on the top of the board in the FCC photos.

According to the User Manual, only the Tenda AC10U model has a USB port.

The Product Similarity Declaration document says,
  • "The model of AC10U's Power is 12Vdc 1.5A, with a USB port and circuit.
  • The model of AC10's Power is 12Vdc 1A, without a USB port and circuit.
The difference of two models just are adapter power, USB port and circuit. The rest are same.
The difference between the two models has no effect on the power of prototype."

Links of Interest

Reviews

Specifications from the review:
  • Number of Antennas/Removable: 4/No
  • Ports: 1x WAN / 3x LAN (GbE)
  • Size: 8.6 x 5.5 x 1.9 inches or 220 x 141.5 x 49 mm
  • Weight: 12.3 ounces or 350 grams

JTAG-Serial Info

Serial

Serial • >> •.
====Settings for serial access====
* Bits per second/Baud rate = 115200
* Data Bits = 8
* Parity = none
* Stop bits = 1
* Flow control = none

====Bootloader commands====
<RealTek>?
----------------- COMMAND MODE HELP ------------------
HELP (?)                 : Print this help message
DB <Address> <Len>
DW <Address> <Len>
EB <Address> <Value1> <Value2>...
EW <Address> <Value1> <Value2>...
CMP: CMP <dst><src><length>
IPCONFIG:<TargetAddress>
MEMCPY:<dst><src><length>
AUTOBURN: 0/1
LOADADDR: <Load Address>
J: Jump to <TargetAddress>
reboot
FLI: Flash init
FLR: FLR <dst><src><length>
FLW <dst_ROM_offset><src_RAM_addr>
<length_Byte> <SPI cnt#>: Write to SPI
MDIOR:  MDIOR phyid reg
MDIOW:  MDIOW phyid reg data
PHYR: PHYR <PHYID><reg>
PHYW: PHYW <PHYID><reg><data>
PHYPR: PHYPR <PHYID><page><reg>
PHYPW: PHYPW <PHYID><page><reg><data>
COUNTER: Dump Asic Counter
XMOD <addr>  [jump]
TI : timer init
T : test
ETH : startup Ethernet
CPUClk:
CP0
ERASECHIP
ERASESECTOR
SPICLB (<flash ID>) : SPI Flash Calibration
D8 <Address>
E8 <Address> <Value>

Serial Recovery

Unbrick procedure
  • Connect router to PC via serial (CH340, PL2303, etc.)
If you don't know GND, RX, TX see below image. YOU DON'T NEED VCC!!!
  • Before power up, press RST/WPS button and hold it, then connect the power.
You should hold RST/WPS for about 15 secs since you connected the power,
in order to enter "disaster mode".
  • Connect cable between WAN1 port and your computer network card.
For that connection set IP 192.168.1.100, subnet mask 255.255.255.0
- you don't need to fill out gateway.
(In my case I've used the portable version of Tftpd64 - v4.62)
  • Open Tftpd32/Tftpd64; Server interfaces → select your connection,
the one with IP 192.168.1.100.
  • Select Tftp Client tab; Host: 192.168.1.6, Port: 69, Local file:
*SELECT YOUR FIRMWARE*, Remote file: *LEAVE EMPTY*,
Block Size: Default and press "Put".

Pictures

User Images

See also