doc
From TechInfoDepot
Jump to navigationJump to search| This is a documentation subpage for Template:Infobox Embedded System. It contains usage information, categories and other content that is not part of the original template page. |
| This template employs intricate features of template syntax.
You are encouraged to familiarise yourself with its setup and parser functions before editing the template. If your edit causes unexpected problems, please undo it quickly, as this template may appear on a large number of pages. Remember that you can conduct experiments, and should test all improvements, in either the general Template sandbox or your user space before changing anything here. |
| This template is used on many pages, and changes to it will be widely noticed. Please test any changes in the template's /sandbox or /testcases subpages, or in a user subpage, and consider discussing changes at the talk page before implementing them. |
| Infobox templates | |
|---|---|
| template | context |
| {{Infobox Network Adapter}} | Network Adapter |
| {{Infobox Embedded System}} | Embedded System |
| {{Infobox Network Switch}} | Network Switch |
| {{Infobox 802dot11 device NOS}} | 802dot11 device NOS |
| {{Infobox Bluetooth device NOS}} | Bluetooth device NOS |
| {{Infobox Hard disk drive}} | Hard disk drive |
| {{Infobox Mobile general-purpose computer (non-PC)}} | Mobile general-purpose computer (non-PC) |
| {{Infobox Peripheral NOS}} | Peripheral NOS |
| {{Infobox Portable personal computer}} | Portable personal computer |
| {{Infobox Solid-state drive}} | Solid-state drive |
| {{Infobox USB Hub}} | USB Hub |
Fully capable of handling 4 radio systems
ToDo
- add ax-qam
- add exp_SCSI_num Cobalt RaQ 2
Example
Full list for copy & paste
To use, copy and paste this on the Embedded System page or use the preloaded web page wizard here. For each variable, delete everything from <!-- to --> and enter the information as described.
{{inuse}}{{Infobox Embedded System
|image1 = <!-- Image filename -->
|image1_size = <!-- Image size, ex.150px -->
|caption = <!-- tagline -->
|caption2 = <!-- 2nd tagleine -->
|pp = <!-- product page url only -->
|sp = <!-- Support page url only -->
|dl = <!-- Download page url only -->
|wikidevi = <!-- wikidevi.wi-cat.ru page, included underscores -->
|wikipedia = <!-- [[wikipedia:Main Page|Wikipedia]] Leave blank for none -->
|ddwrtsupport = <!-- Supported, Not Supported, Incompatible, or leave blank for unknown -->
|openwrtsupport = <!-- Supported, Not Supported, Incompatible, or leave blank for unknown -->
|tomatosupport = <!-- Supported, Not Supported, Incompatible, or leave blank for unknown -->
|gargoylesupport = <!-- Supported, Not Supported, Incompatible, or leave blank for unknown -->
|brand = <!-- Brand? Name, Leave blank for unknown -->
|model = <!-- Model number, Leave blank for unknown -->
|submodelappend = <!-- yes, for space -->
|submodel = <!-- SubModel number, Leave blank for unknown -->
|revision = <!-- Model Revision, Leave blank for none or unknown -->
|subrevision = <!-- Model Subrevision, Leave blank for none or unknown -->
|model_part_num =
|wlclass = <!-- Wireless class -->
|series = <!-- Device series -->
|type = <!-- Type of device, Leave blank for none -->
|sernum = <!-- First 4 or so for easy version identification -->
|fcc_id = <!-- Federal Communication Commission Identification Number -->
|icid = <!-- Industry Canada Identification number, Leave blank for unknown -->
|us_id = <!-- US ID number -->
|boardid = <!-- Board Identification, Leave blank for none -->
|ecc_id = <!-- eec-id -->
|cpu1brand = <!-- Brand? Leave blank if unknown -->
|cpu1model = <!-- Model? Leave blank if unknown -->
|cpu1modelfull = <!-- CPU1 Full chip info -->
|cpu1_cores = <!-- 1,2,3,4 -->
|cpu1_type = <!-- ARM,MIPS,x86-64, -->
|armrev1 = <!-- ARM Revision, Leave blank for unknown -->
|mipsrev1 = <!-- MIPS Revision, Leave blank for unknown -->
|x86-64rev1 = <!-- x86-64 Revision, Leave blank for unknown -->
|cpu1spd = <!-- CPU1 speed, MHz, GHz, Leave blank if unknown -->
|cpu2brand = <!-- Brand? Leave blank if unknown -->
|cpu2model = <!-- Model? Leave blank if unknown -->
|cpu2modelfull = <!-- CPU2 Full chip info -->
|cpu2_cores = <!-- 1,2,3,4 -->
|cpu2_type = <!-- ARM,MIPS,X86, -->
|armrev2 = <!-- ARM Revision, Leave blank for unknown -->
|mipsrev2 = <!-- MIPS Revision, Leave blank for unknown -->
|x86-64rev2 = <!-- x86-64 Revision, Leave blank for unknown -->
|cpu2spd = <!-- CPU2 speed, MHz, GHz, Leave blank if unknown -->
|bus = <!-- 8-bit, 16-bit, 32-bit, 64-bit, Leave blank for none -->
|flash1type = <!-- Parallel,Serial(SPI),SPI NOR,NAND,Compact Flash, -->
|fla1_num = <!-- 1,2,3,4 -->
|fla1chipbrand = <!-- Brand? Leave blank if unknown -->
|fla1chipmodel = <!-- Model? Leave blank if unknown -->
|fla1chipmodelfull = <!-- Flash1 full chip info -->
|flash1size = <!-- Size of flash -->
|flash1maxsize = <!-- Maximum size firmware can be in bytes -->
|flash2type = <!-- Parallel,Serial(SPI),SPI NOR,NAND,Compact Flash, -->
|fla2_num = <!-- 1,2,3,4 -->
|fla2chipbrand = <!-- Brand? Leave blank if unknown -->
|fla2chipmodel = <!-- Model? Leave blank if unknown -->
|fla2chipmodelfull = <!-- Flash2 full chip info -->
|flash2size = <!-- Size of flash -->
|flash2maxsize = <!-- Maximum size firmware can be in bytes -->
|flash3type = <!-- Parallel,Serial(SPI),SPI NOR,NAND,Compact Flash, -->
|fla3_num = <!-- 1,2,3,4 -->
|fla3chipbrand = <!-- Brand? Leave blank if unknown -->
|fla3chipmodel = <!-- Model? Leave blank if unknown -->
|fla3chipmodelfull = <!-- Flash2 full chip info -->
|flash3size = <!-- Size of flash -->
|flash3maxsize = <!-- Maximum size firmware can be in bytes -->
|ram1type = <!-- DDR,DDR2,DDR3,DDR4, -->
|ram1type1 = <!-- SO-DIMM,SDRAM, -->
|ram1spd = <!-- 3400,3333,3300,3200,3100,3000,2800,2666,2600,2400,2133,2000,1866,1600,1066,1333,800 -->
|ram1size = <!-- Size of RAM -->
|ram1chipbrand = <!-- Brand? Leave blank if unknown -->
|ram1chipmodel = <!-- Model? Leave blank if unknown -->
|ram1chipmodelfull = <!-- RAM1 full chip info -->
|ram1_num = <!-- Number of Ram chips -->
|ram2type = <!-- DDR,DDR2,DDR3,DDR4, -->
|ram2type1 = <!-- SO-DIMM,SDRAM, -->
|ram2spd = <!-- 3400,3333,3300,3200,3100,3000,2800,2666,2600,2400,2133,2000,1866,1600,1066,1333,800 -->
|ram2size = <!-- Size of RAM -->
|ram2chipbrand = <!-- Brand? Leave blank if unknown -->
|ram2chipmodel = <!-- Model? Leave blank if unknown -->
|ram2chipmodelfull = <!-- RAM2 full chip info -->
|ram2_num = <!-- Number of Ram chips -->
|ram3type = <!-- DDR,DDR2,DDR3,DDR4, -->
|ram3type1 = <!-- SO-DIMM,SDRAM, -->
|ram3spd = <!-- 3400,3333,3300,3200,3100,3000,2800,2666,2600,2400,2133,2000,1866,1600,1066,1333,800 -->
|ram3size = <!-- Size of RAM -->
|ram3chipbrand = <!-- Brand? Leave blank if unknown -->
|ram3chipmodel = <!-- Model? Leave blank if unknown -->
|ram3chipmodelfull = <!-- RAM2 full chip info -->
|ram3_num = <!-- Number of Ram chips -->
|nvramsize = <!-- 32, 60, 64, etc... in kb, Leave blank for unknown -->
|eth_none = <!-- true, -->
|eth_cpu = <!-- true, -->
|ethchip1brand = <!-- Brand?, Leave blank if unknown -->
|ethchip1model = <!-- Model?, Leave blank if unknown -->
|ethchip1modelfull = <!-- Ethernet1 full chip info -->
|ethchip2brand = <!-- Brand?, Leave blank if unknown -->
|ethchip2model = <!-- Model?, Leave blank if unknown -->
|ethchip2modelfull = <!-- Ethernet2 full chip info -->
|ethchip3brand = <!-- Brand?, Leave blank if unknown -->
|ethchip3model = <!-- Model?, Leave blank if unknown -->
|ethchip3modelfull = <!-- Ethernet3 full chip info -->
|ethchip4brand = <!-- Brand?, Leave blank if unknown -->
|ethchip4model = <!-- Model?, Leave blank if unknown -->
|ethchip4modelfull = <!-- Ethernet4 full chip info -->
|ethchip5brand = <!-- Brand?, Leave blank if unknown -->
|ethchip5model = <!-- Model?, Leave blank if unknown -->
|ethchip5modelfull = <!-- Ethernet5 full chip info -->
|ethchip6brand = <!-- Brand?, Leave blank if unknown -->
|ethchip6model = <!-- Model?, Leave blank if unknown -->
|ethchip6modelfull = <!-- Ethernet6 full chip info -->
|ethchip7brand = <!-- Brand?, Leave blank if unknown -->
|ethchip7model = <!-- Model?, Leave blank if unknown -->
|ethchip7modelfull = <!-- Ethernet6 full chip info -->
|sw_cpu = <!-- true, -->
|switchbrand = <!-- Brand?, Leave blank if unknown -->
|switchmodel = <!-- Model?, Leave blank if unknown -->
|switchmodelfull = <!-- Switch1 full chip info -->
|switch2brand = <!-- Brand?, Leave blank if unknown -->
|switch2model = <!-- Model?, Leave blank if unknown -->
|switch2modelfull = <!-- Switch1 full chip info -->
|switch3brand = <!-- Brand?, Leave blank if unknown -->
|switch3model = <!-- Model?, Leave blank if unknown -->
|switch3modelfull = <!-- Switch1 full chip info -->
|cm_down_c =
|cm_up_c =
|docsisver =
|dsl_ports =
|voip_ports =
|wan_ports = <!-- 1, -->
|wan_speed = <!-- 10MbE,100MbE,1GbE, -->
|wan2_ports = <!-- 1, -->
|wan2_speed = <!-- 10MbE,100MbE,1GbE, -->
|totwan = <!-- total wan ports -->
|lan_ports = <!-- 4, -->
|lan_speed = <!-- 10MbE,100MbE,1GbE, -->
|lan2_ports = <!-- 4, -->
|lan2_speed = <!-- 10MbE,100MbE,1GbE, -->
|totlan = <!-- total lan ports -->
|ethstandard = <!-- IEEE 802.3?,IEEE 802.3,IEEE 802.3/3u,IEEE 802.3/3u/3ab,IEEE 802.3/3u/3x,IEEE 802.1x/3/3ab/3u/3x/3z -->
|portbasedvlan = <!-- Support for port based vlan tagging, Leave blank for unknown -->
|802.1qvlan = <!-- Support for 802.1q vlan tagging, Leave blank for unknown -->
|auto_mdix = <!-- mdix support -->
|sup_jumbo = <!-- Jumbo frames support -->
|ethoui = <!-- Leave blank for unknown -->
|oui = <!-- Wireless OUI -->
|bootwait = <!-- On or Off, Leave blank for unknown -->
|stock_bootloader = <!-- OEM Bootloader, BSP,CFE (128k),CFE,CFE (vender modified),U-Boot,U-Boot;3.3;Ralink,Redboot,ROME,RouterBOOT,Not Listed, Leave blank for unknown -->
|stock_bl_version = <!-- bootloader version -->
|stock_bl_dist = <!-- bootloader distro -->
|stock_os = <!-- OEM Operating System, Debian,eCos,ISOS,Linux,Nucleus RTOS,RouterOS,SlugOS,SuperTask!,ThreadX,μClinux,VxWorks,ZyNOS -->
|stock_os_kern = <!-- OEM Operating System kernel revision -->
|stock_os_sdk = <!-- OEM Operating System sdk revision -->
|stock_bootloader2 = <!-- OEM Bootloader, BSP,CFE (128k),CFE,CFE (vender modified),U-Boot,U-Boot;3.3;Ralink,Redboot,ROME,RouterBOOT,Not Listed, Leave blank for unknown -->
|stock_bl2_version = <!-- bootloader version -->
|stock_bl2_dist = <!-- bootloader distro -->
|stock_os2 = <!-- OEM Operating System, Debian,eCos,ISOS,Linux,Nucleus RTOS,RouterOS,SlugOS,SuperTask!,ThreadX,μClinux,VxWorks,ZyNOS -->
|stock_os2_kern = <!-- OEM Operating System kernel revision -->
|stock_os2_sdk = <!-- OEM Operating System sdk revision -->
|exp_if_types = <!-- Expansion Interface types, Leave blank for none -->
|exp_sim_num = <!-- Number of sim Slots, Leave blank for none -->
|exp_pcmcia_num = <!-- Number of pcmcia ports, Leave blank for none -->
|exp_expcard_num = <!-- Number of Expresscard ports, Leave blank for none -->
|exp_minipci_num = <!-- Number of Mini PCI Slots, Leave blank for none -->
|exp_minipcie_num = <!-- Number of Mini PCIexpress Slots, Leave blank for none -->
|exp_usb_num = <!-- Number of USB Ports, Leave blank for none -->
|exp_cf_num = <!-- Number Compact Flash Slots, Leave blank for none -->
|exp_sdmmc_num = <!-- Number SD/MMC Slots, Leave blank for none -->
|exp_ide_num = <!-- Number of ide ports, Leave blank for none -->
|exp_ata_num = <!-- Number of ATA Ports, Leave blank for none -->
|exp_sata_num = <!-- Number of sata ports, Leave blank for none -->
|exp_esata_num = <!-- Number of esata ports, Leave blank for none -->
|exp_parallel = <!-- Number of parallel ports, Leave blank for none -->
|exp_sfp_num = <!-- Number of sfp ports, Leave blank for none -->
|exp_M.2 = <!-- Number of M.2 ports, Leave blank for none -->
|exp_hdmi_num =
|usb_hub = <!-- USB hub compatibility -->
|pwr_volt_type = <!-- VDC,VAC, or POE, -->
|pwr_vdc = <!-- DC Volts -->
|pwr_amp_dc = <!-- DC Amps -->
|pwr_vac = <!-- AC Volts -->
|pwr_ac_hz = <!-- AC Hertz -->
|pwr_amp_ac = <!-- AC Amps -->
|pwr_poe_type = <!-- Type of POE -->
|pwr_poe = <!-- POE Volts -->
|pwr_poe_amp = <!-- POE Amps -->
|pwr_conn = <!-- Connector Type -->
|pwr_barrel_outer = <!-- Outer barrel size in mm -->
|pwr_barrel_inner = <!-- Inner barrel size in mm -->
|pwr_barrel_len = <!-- Length of barrel -->
|pwr_pol = <!-- Connector polarity -->
|serial = <!-- Full Serial info -->
|jtag = <!-- Full JTAG info -->
|specialfeat = <!-- Features that don't fit any place else, Leave blank for none -->
|flags = <!-- flags, Leave blank for none -->
|addchip = <!-- Additional Chips -->
|802dot11_protocols = <!-- ie abgn+ac+ad+ax+be,none, -->
|defaulip = <!-- ???.???.???.???, default IP Address -->
|defaultlogin = <!-- default Login Name, Leave blank for unknown -->
|defaultpass = <!-- default Password, Leave blank for unknown -->
|defaultssid = <!-- default Wireless ID, Leave blank for unknown -->
|defaultssid_regex =
|default_ch = <!-- Defaults channel(s) Radio(s) are set to -->
|manuf = <!-- Manufacturer -->
|manuf_model = <!-- Manufacturer Model -->
|manuf_rev = <!-- Manufacturer Revision -->
|is_manuf = <!-- Yes, or No, -->
|tpfirmware = <!-- Third party firmware official support, AsusWRT-Merlin, CeroWrt, DD-WRT, DD-WRT (kong), DD-WRT (kongac), DD-WRT (kongarm), FreedomBox, FreshTomato-ARM, Gargoyle, LibreWrt, Oleg (wl500g), Oleg-ng (wl500g), OpenWrt, Tomato, Tomato RAF, Tomato (shibby), Tomato (Toastman), TomatoUSB, Wive-NG -->
|availability = <!-- Market availability -->
|eoldate = <!-- End of Life date -->
|fccapprovdate = <!-- FCCID approval date -->
|estreldate = <!-- Estimated release date -->
|estprice = <!-- Estimated retail price in US dollars -->
|upc = <!-- UPC number -->
|ean = <!-- EAN number -->
|dx_sku = <!-- DealExtreme sku -->
|newegg = <!-- newegg item number -->
|asin = <!-- ASIN number -->
|asin_country = <!-- ASIN country -->
|asin2 = <!-- ASIN number -->
|asin_country2 = <!-- ASIN country -->
|asin3 = <!-- ASIN number -->
|asin_country3 = <!-- ASIN country -->
|asin4 = <!-- ASIN number -->
|asin_country4 = <!-- ASIN country -->
|countrymanuf = <!-- Country device was manufactured in -->
|buttons = <!-- buttons available -->
|led = <!-- Led colors and descriptions -->
|dimensions = <!-- Size of device {{convert |length|x|widthordepth|x|height|in|mm}} -->
|weight = <!-- Weight of device {{convert|weight|oz|g}} -->
|rad1mod = <!-- Radio module name, optional link, Leave blank for none -->
|rad1modif = <!-- Radio Module Interface Type, Leave blank for none -->
|rad1chip1brand = <!-- Brand?, Leave blank if unknown -->
|rad1chip1model = <!-- Model?, Leave blank if unknown -->
|rad1chip1modelfull = <!-- radio1 chip1 full info -->
|rad1chip2brand = <!-- Brand?, Leave blank if unknown -->
|rad1chip2model = <!-- Model?, Leave blank if unknown -->
|rad1chip2modelfull = <!-- radio1 chip2 full info -->
|rad1chip3brand = <!-- Brand?, Leave blank if unknown -->
|rad1chip3model = <!-- Model?, Leave blank if unknown -->
|rad1chip3modelfull = <!-- radio1 chip3 full info -->
|rad1oui = <!-- Leave blank for unknown -->
|rad1_ant_conn = <!-- Leave blank for unknown -->
|rad1txchains = <!-- Number of transmit radio chains, Leave blank if unknown -->
|rad1rxchains = <!-- Number of receive radio chains, Leave blank if unknown -->
|rad1sstreams = <!-- Number of spatial data streams, Leave blank if unknown -->
|rad1stand = <!-- IEEE 802.11a/b/g/n/ac/ad/ax/be, Capable standards for thos radio -->
|rad1be = <!-- Maximum throughput rated at -->
|rad1ay = <!-- Maximum throughput rated at -->
|rad1ax = <!-- 574, 1148, 4804, Maximum throughput rated at -->
|rad1ad = <!-- ??? Maximum throughput rated at -->
|acqam1 = <!-- AC-qam -->
|rad1ac = <!-- 433, 867, 1300, 1733, Maximum throughput rated at -->
|nqam1 = <!-- 600, 800, 900, 1000, -->
|rad1n = <!-- 150, 300, 450, 600, Maximum throughput rated at -->
|rad1g = <!-- 54, 108, Maximum throughput rated at -->
|rad1b = <!-- 11, Maximum throughput rated at -->
|rad1a = <!-- 54, Maximum throughput rated at -->
|rad1freq = <!-- 2.4 or 5 or 6, Frequency band(s) of this radio -->
|rad1correv = <!-- core revision, Leave blank for none or unknown -->
|rad1cap = <!-- radio capabilities, Leave blank for none or unknown -->
|rad2mod = <!-- Radio module name, optional link, Leave blank for none -->
|rad2modif = <!-- Radio Module Interface Type, Leave blank for none -->
|rad2chip1brand = <!-- Brand?, Leave blank if unknown -->
|rad2chip1model = <!-- Model?, Leave blank if unknown -->
|rad2chip1modelfull = <!-- radio2 chip1 full info -->
|rad2chip2brand = <!-- Brand?, Leave blank if unknown -->
|rad2chip2model = <!-- Model?, Leave blank if unknown -->
|rad2chip2modelfull = <!-- radio2 chip2 full info -->
|rad2chip3brand = <!-- Brand?, Leave blank if unknown -->
|rad2chip3model = <!-- Model?, Leave blank if unknown -->
|rad2chip3modelfull = <!-- radio2 chip3 full info -->
|rad2oui = <!-- Leave blank for unknown -->
|rad2_ant_conn = <!-- Leave blank for unknown -->
|rad2txchains = <!-- Number of transmit radio chains, Leave blank if unknown -->
|rad2rxchains = <!-- Number of receive radio chains, Leave blank if unknown -->
|rad2sstreams = <!-- Number of spatial data streams, Leave blank if unknown -->
|rad2stand = <!-- IEEE 802.11a/b/g/n/ac/ad/ax/be, Capable standards for thos radio -->
|rad2be = <!-- Maximum throughput rated at -->
|rad2ay = <!-- Maximum throughput rated at -->
|rad2ax = <!-- 574, 1148, 4804, Maximum throughput rated at -->
|rad2ad = <!-- ??? Maximum throughput rated at -->
|acqam2 = <!-- AC-qam -->
|rad2ac = <!-- 433, 867, 1300, 1733, Maximum throughput rated at -->
|nqam2 = <!-- 600, 800, 900, 1000, -->
|rad2n = <!-- 150, 300, 450, 600, Maximum throughput rated at -->
|rad2g = <!-- 54, 108, Maximum throughput rated at -->
|rad2b = <!-- 11, Maximum throughput rated at -->
|rad2a = <!-- 54, Maximum throughput rated at -->
|rad2freq = <!-- 2.4 or 5 or 6, Frequency band(s) of this radio -->
|rad2correv = <!-- core revision, Leave blank for none or unknown -->
|rad2cap = <!-- radio capabilities, Leave blank for none or unknown -->
|rad3mod = <!-- Radio module name, optional link, Leave blank for none -->
|rad3modif = <!-- Radio Module Interface Type, Leave blank for none -->
|rad3chip1brand = <!-- Brand?, Leave blank if unknown -->
|rad3chip1model = <!-- Model?, Leave blank if unknown -->
|rad3chip1modelfull = <!-- radio3 chip1 full info -->
|rad3chip2brand = <!-- Brand?, Leave blank if unknown -->
|rad3chip2model = <!-- Model?, Leave blank if unknown -->
|rad3chip2modelfull = <!-- radio3 chip2 full info -->
|rad3chip3brand = <!-- Brand?, Leave blank if unknown -->
|rad3chip3model = <!-- Model?, Leave blank if unknown -->
|rad3chip3modelfull = <!-- radio3 chip3 full info -->
|rad3oui = <!-- Leave blank for unknown -->
|rad3_ant_conn = <!-- Leave blank for unknown -->
|rad3txchains = <!-- Number of transmit radio chains, Leave blank if unknown -->
|rad3rxchains = <!-- Number of receive radio chains, Leave blank if unknown -->
|rad3sstreams = <!-- Number of spatial data streams, Leave blank if unknown -->
|rad3stand = <!-- IEEE 802.11a/b/g/n/ac/ad/ax/be, Capable standards for thos radio -->
|rad3be = <!-- Maximum throughput rated at -->
|rad3ay = <!-- Maximum throughput rated at -->
|rad3ax = <!-- 574, 1148, 4804, Maximum throughput rated at -->
|rad3ad = <!-- ???, Maximum throughput rated at -->
|acqam3 = <!-- AC-qam -->
|rad3ac = <!-- 433, 867, 1300, 1733, Maximum throughput rated at -->
|nqam3 = <!-- 600, 800, 900, 1000, -->
|rad3n = <!-- 150, 300, 450, 600, Maximum throughput rated at -->
|rad3g = <!-- 54, 108, Maximum throughput rated at -->
|rad3b = <!-- 11, Maximum throughput rated at -->
|rad3a = <!-- 54, Maximum throughput rated at -->
|rad3freq = <!-- 2.4 or 5 or 6, Frequency band(s) of this radio -->
|rad3correv = <!-- core revision, Leave blank for none or unknown -->
|rad3cap = <!-- radio capabilities, Leave blank for none or unknown -->
|rad4mod = <!-- Radio module name, optional link, Leave blank for none -->
|rad4modif = <!-- Radio Module Interface Type, Leave blank for none -->
|rad4chip1brand = <!-- Brand?, Leave blank if unknown -->
|rad4chip1model = <!-- Model?, Leave blank if unknown -->
|rad4chip1modelfull = <!-- radio4 chip1 full info -->
|rad4chip2brand = <!-- Brand?, Leave blank if unknown -->
|rad4chip2model = <!-- Model?, Leave blank if unknown -->
|rad4chip2modelfull = <!-- radio4 chip2 full info -->
|rad4chip3brand = <!-- Brand?, Leave blank if unknown -->
|rad4chip3model = <!-- Model?, Leave blank if unknown -->
|rad4chip3modelfull = <!-- radio4 chip3 full info -->
|rad4oui = <!-- Leave blank for unknown -->
|rad4_ant_conn = <!-- Leave blank for unknown -->
|rad4txchains = <!-- Number of transmit radio chains, Leave blank if unknown -->
|rad4rxchains = <!-- Number of receive radio chains, Leave blank if unknown -->
|rad4sstreams = <!-- Number of spatial data streams, Leave blank if unknown -->
|rad4stand = <!-- IEEE 802.11a/b/g/n/ac/ad/ax/be, Capable standards for thos radio -->
|rad4be = <!-- Maximum throughput rated at -->
|rad4ay = <!-- Maximum throughput rated at -->
|rad4ax = <!-- 574, 1148, 4804, Maximum throughput rated at -->
|rad4ad = <!-- ???, Maximum throughput rated at -->
|acqam4 = <!-- AC-qam -->
|rad4ac = <!-- 433, 867, 1300, 1733, Maximum throughput rated at -->
|nqam4 = <!-- 600, 800, 900, 1000 -->
|rad4n = <!-- 150, 300, 450, 600, Maximum throughput rated at -->
|rad4g = <!-- 54, 108, Maximum throughput rated at -->
|rad4b = <!-- 11, Maximum throughput rated at -->
|rad4a = <!-- 54, Maximum throughput rated at -->
|rad4freq = <!-- 2.4 or 5 or 6, Frequency band(s) of this radio -->
|rad4correv = <!-- core revision, Leave blank for none or unknown -->
|rad4cap = <!-- radio capabilities, Leave blank for none or unknown -->
}}{{TIDTOC|embedded}}
==Overview==
{{Empty section|{{subst:DATE}}|section=}}
==Links of Interest==
{{Empty section|{{subst:DATE}}|section=}}
==Flashing==
{{Flashnotice}}
==Upgrading==
{{Empty section|{{subst:DATE}}|section=}}
==Reverting==
{{Empty section|{{subst:DATE}}|section=}}
==JTAG-Serial Info==
{{Empty section|{{subst:DATE}}|section=}}
<!-- ===JTAG===
====JTAG Pinouts====
{{Empty section|{{subst:DATE}}|section=}}
====JTAG Recovery====
{{Empty section|{{subst:DATE}}|section=}}
===Serial===
====Serial Pinouts====
{{Empty section|{{subst:DATE}}|section=}}
====Serial Recovery====
{{Empty section|{{subst:DATE}}|section=}}
{{/Serial info}} -->
==USB Info==
{{Empty section|{{subst:DATE}}|section=}}
==vlan Info==
{{Empty section|{{subst:DATE}}|section=}}
==Pictures==
{{Empty section|{{subst:DATE}}|section=}}
<!-- <center>'''Retail Images'''
<gallery>
File:File.png|
File:File.png|
File:File.png|
File:File.png|
File:File.png|
File:File.png|
File:File.png|
File:File.png|
File:File.png|
File:File.png|
</gallery></center>[[Has images::retail| ]][[Has images::external| ]][[Has images::packaging| ]] -->[[Category:Retail Photo's Needed]]
<!-- <center>'''User Images'''
<gallery>
File:File.png|
File:File.png|
File:File.png|
File:File.png|
File:File.png|
File:File.png|
File:File.png|
File:File.png|
File:File.png|
File:File.png|
</gallery></center>[[Has images::internal| ]][[Has images::external| ]][[Has images::label| ]][[Has images::power adapter| ]] -->[[Category:User Photo's Needed]]
<!-- <center>'''FCCID {{fccid|fccidnumber}}'''
<gallery>
File:File.png|
File:File.png|
File:File.png|
File:File.png|
File:File.png|
File:File.png|
File:File.png|
File:File.png|
File:File.png|
File:File.png|
</gallery></center>[[Has images::fcc| ]] -->[[Category:FCC Photo's Needed]]
==Notes==
{{Empty section|{{subst:DATE}}|section=}}
<!-- Firmware Specific Notes Here, Device Specific Above -->
==Hardware Modification==
{{Empty section|{{subst:DATE}}|section=}}
==See also==
{{Empty section|{{subst:DATE}}|section=}}
[[Category:English Documentation]]
[[Category:New Entry]]
See also