Technicolor TC4400
From TechInfoDepot
Jump to navigationJump to search
Advanced DOCSIS 3.1 Cable Modem for multi-Gigabit data services | |
Homepage | |
---|---|
Platform | |
Brand • Model • Rev |
technicolor TC4400 XM6 |
Type |
cable modem |
CPU1 |
Broadcom BCM3390 |
CPU1 Speed |
1.5 GHz ( 2 cores ) |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
Broadcom BCM3390 |
Switch |
Broadcom BCM3390 |
Ethernet Port Count |
2-1GbE-LAN |
802dot11 OUI: none specified | |
Expansion IF types |
none specified |
Power |
12 VDC, 2 A |
Connector type |
barrel |
Flags |
DOCSIS 3.1 |
Other | |
Default IP address |
192.168.100.1 |
Default login user |
admin |
Default login password |
bEn2o#US9s |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Overview[edit]
2x2 OFDM(A) bonded channels in DOCSIS 3.1 mode
- 32x8 bonded channels in DOCSIS 3.0 mode
- The Technicolor TC4400 AM (REV 3.0.0, SW: SR70.12.19) has two accounts:
- Default admin account:
- username:
admin
- password:
bEn2o#US9s
- username:
- There is also a less-privileged user account:
- username:
user
- password:
Techni1789#
(On some versions it might be justpassword
) - Here are its restrictions, in comparison to the admin account:
- "Spectrum Analyzer" is hidden from the left sidebar
- The "CM Connection" has much less detail:
- "Configuration File" shows "Config file path hidden"
- The "Unerrored Codewords", "Corrected Codewords", and "Uncorrectable Codewords" columns of the "Downstream Channel Status" table are entirely hidden
- The "CM IP" addresses, durations and expiration dates are all hidden.
- The "CM Event Log" page is useless, as the "SNMP Event Log" table is hidden.
- username:
- Default admin account:
Links of Interest[edit]
![]() | This section is empty. You can help by adding to it. (January 2022) |
Flashing[edit]
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading[edit]
![]() | This section is empty. You can help by adding to it. (January 2022) |
Reverting[edit]
![]() | This section is empty. You can help by adding to it. (January 2022) |
JTAG-Serial Info[edit]
![]() | This section is empty. You can help by adding to it. (January 2022) |
USB Info[edit]
![]() | This section is empty. You can help by adding to it. (January 2022) |
vlan Info[edit]
![]() | This section is empty. You can help by adding to it. (January 2022) |
Pictures[edit]
![]() | This section is empty. You can help by adding to it. (January 2022) |
Notes[edit]
![]() | This section is empty. You can help by adding to it. (January 2022) |
Hardware Modification[edit]
![]() | This section is empty. You can help by adding to it. (January 2022) |