TechInfoDepot:Tomato/Shibby/change log

From TechInfoDepot
Jump to navigationJump to search

[RELEASE] 109

  • Webmon Backup Script – look Administration -> Logging
  • Busybox: Fix tune2fs and revert e2label tool
  • EtherState: cosmetics changes – looks better
  • Ethernet State: fix when WAN is tagged – thx @Victek
  • Allow WNR3500Lv2 to upgrade from Web interface
  • Openssl: enable s_client
  • rp-pppoe: upgrade to 3.11
  • Dnsmasq upgrade to 2.67test3 – thx @Kevin
  • Added refresh timer to tools/system page – thx @Toastman
  • Add Time 0:01 and 23:59 to Scheduler
  • Backported new exportfs method (365-exportfs1 patch from WL500g) – thx @RMerlin
  • Extended MOTD with GUI – written by @Monter, modified by @Shibby – can be disabled in GUI Administration -> Admin Access -> SSH
  • IPTraffic bugfix – thx @RMerlin
  • StealthMode v0.5 – Sunset – thx @Monter – please run stealthMode via SSH/telcon for more information
  • Fix for dhcpv6 with prefix delegation – thx @Toastman
  • Remove radvd & libdaemon, use dnsmasq for IPv6 RA instead – thx @Kevin
  • Added ipset support – thx @RMerlin
  • Implement multithreaded kernel building to speed up firmware compile time – thx @RMerlin
  • Do not write out ‚no-dhcp-interface’ in dnsmasq.conf as is superfluousas no dhcp-range has been set – thx @Kevin

[RELEASE] 108

  • Fix vsftpd rights
  • Fix upnp GUI
  • Miniupnpd: fix permissions to use dotted mask. Return to dotted mask in config file.
  • Further optimize lzo compilation to help OpenVPN performance and This optimization gives us a 10% speed gain (thx RMerlin)
  • Miniupnpd: add custom configuration textarea to GUI
  • Fix reboot/logout/shutdown buttons from nas-ups page.
  • Make some images smaller
  • Add ebtables to all mini K26 builds.
  • HTTPS remote access should now works on builds without VPN included (libssl problem)
  • Fix default vlans for RG200E-CA

[RELEASE] 107

  • Preliminary ChinaNet RG200E-CA support (RT-N branch, only for routers with changed CFE)
  • StealthMode v0.3 (fixed turn on/off leds on RT-N16, add „leds guardian” to cru) (thx Monter)
  • Gives another nice performance boost, for less than 100KB tradeoff after LZMA compression ( thx RMerlin)
  • Ntfs-3g release 2013.1.13
  • Increase TC_HTB_NUMPRIO to 10 (thx Toastman)
  • Improvement in the appearance of the qos-classify ( thx Monter)
  • Preliminary FiberHome HG320 ID/support (RT-N branch)
  • Preliminary Catchtech CW-5358U ID/support ( RT-N branch)
  • Add new miniVPN buildtype for router with 4MB flash
  • Dnsmasq: update to 2.66TEST16 ( thx Kevin)
  • Make remote HTTPS more secure ( use RSA 2048 key, use router name as CN)
  • Miniupnpd: fix SIGUSR2 problem
  • fix showing opened ports in GUI
  • lanmask has to be present as bits
  • Transmission: update to 2.77
  • Busybox: revert dhcpc from BB 1.18.4 for now
  • Works release/renew
  • Remaining Lease Time is showing correct
  • TTB: we need unzip tool
  • Fix for excessive VPN logging „vpn server already running”
  • 3G Modem: fix switch3g script
  • Ethernet State: cosmetics changes

[RELEASE] 106

  • Busybox: full update to 1.20.2
  • Miniupnpd: update to 1.8 (20130207)
  • Stealthmode scripts for RT-N16 and RT-N66u only. Usage: /usr/sbin/stealthMode on|off
  • Grow up static dhcp entries from 140 to 250
  • Libevent: update to 2.0.21
  • robocfg update for new Ethernet ports state feature
  • Ethernet State Report with GUI
  • Fix OpenVPN depends in K24 builds

Note:

  • Robocfg is not perfect and it`s not fully support all routers with Tomato. On some gigabits routers, 1Gbit connections can be displayed as 10M. It`s a robocfg fault. You can disable speed info from GUI.
  • if ethernet ports are displayed in wrong order, you can enable „invert ports order” options.
  • if some of you don`t like Ethernet ports state, you can disable this feature in GUI.

[HOTFIX] 105.1

If some of you still have a problem with long boot time on Asus RT-N16 + v105 please try 105.1:

http://tomato.groov.pl/download/K26/testing/

Jeżeli ktoś z was wciąż boryka się z problemem długiego startu na routerze Asus RT-N16 +v105 proszę spróbować poprawionej wersji 105.1:

http://tomato.groov.pl/download/K26/testing/

Best Regards / Pozdrawiam

[RELEASE] 105

http://tomato.groov.pl/download/

  • Add TC-ATM overhead calculation for DSL – thx Tvlz
  • Revised QOS classification rules – thx Toastman
  • new L7 filter pattern for youtube – - thx Porter
  • Switchable QOS Pie Chart – thx Dinnn
  • OpenSSL update to 1.0.1c and:
  • enable OpenSSL assembler acceleration
  • enable 2 new openssl commands: version and speed
  • OpenVPN update to 2.3.0 (ipv6 support)
  • LZO update to 2.0.6
  • Transmission: update to 2.76
  • Re-enable TCP Vegas settings
  • Add IMQ based QOS ingress, incoming bandwidth pie chart – thx Tiomo
  • Column sorting fixes – thx Tony550
  • Add previous WAN IP to status overview – thx Victek
  • Correcting grammar errors – Big thanks for GhaladReam
  • Fix VLAN mapping ports for RT-N10U
  • Make some build smaller
  • TomatoAnon: generate a random clock (minutes) for interval update.
  • TTB: project integration and GUI
  • Fix long boot time on Asus RT-N16
  • xl2tpd: update to 1.3.1 + patches. Fix L2TP connections. Tested on Beeline-Russia by user @DollaR
  • Allow to redirect remote access ports (SSH & HTTP(s) ) to router if DMZ is enabled. Checkout new option in forward-dmz page.
  • TOR: update to 2.3.25

[RELEASE] 104

  • Revised/recompiled BCM driver K26RT-N backported from Asus GPL 3.0.0.4.220
  • Support 2nd radio (5GHz) using wl_high module for router Asus RT-N53, Linksys E2500 and E3200
  • VLAN mapping for Asus RT-N53
  • include TomatoAnon project (disabled by default)
  • revert (fully integrade tomato-RT branch with my branch (lot of teddy`s updates from april to august 2011) and add only some of commits like
  • rc: fix for E4200 mac address
  • BCM SDK: dirty dd-wrt fix for Belkin f7d4302 5GHz radio
  • USB: LED driver: support multiple devices
  • Build: fpkg: fix creating Belkin images

[RELEASE] 102

  • Add fully support for 3G modem ZTE MF195 (ttyACM0 device)
  • Transmission: update to 2.71
  • Remove limitation about 22 bits netmask
  • SD card support only for RT-N66u (save space)
  • Add support for Asus WL-330gE
  • Add support for Huawei E3131s-2 (module and usb_modeswitch data only)
  • Remove some extra themes from TOR-VPN builds (save space, image was too big for Netgear 3500L v1)
  • Compile/include mdadm tool only if RAID is set (save space)
  • Fix a bug in the Asus/Linksys Red Themes
  • NTFS-3G update fo 2012.1.15
  • fully integrade tomato-RT branch with my branch (lot of teddy`s updates from april to august 2011

[RELEASE] 101

  • IPv6 suppord fixed (sit.ko module depends)
  • Transmission fixed (libiconv depends issue)
  • RAID 0/1 support. Modules and mdadm tool available in extras. Mega-VPN and AIO have RAID modules and tool build-in
  • radvd update to 1.9.1 + libdaemon
  • Memory leak fixed (when IPv6 is enabled)
  • L2TP WAN connection fixed
  • VLAN mapping for Belkin routers
  • miniDLNA update to 1.0.25
  • AsusRed and LinksysRed themes bu @Nitro 2nd edition
  • Linksys E2500 Power LED fixed
  • Images for Belkin routers (K26)

[RELEASE] 100

  • Fix dnscrypt-proxy
  • Fix GPT support for hard disks
  • IPv6: Proof-of-Concept 6RD support
  • Move all IPSec modules to extras/ipsec/ directory
  • Two new themes by Nitro

[RELEASE] 099

  • Fix virtual wireless (MultiSSID)
  • Transmission: update to 2.61
  • IPP2P: update to 0.99.16
  • DNScrypt-proxy: update to 1.0
  • DDNS: fix HE.net Tunnel Broker messages
  • Add directory /tftpboot to root tree
  • Add e2label (TUNE2FS) tool to USBEXTRAS
  • Added IPSec support. All needed modules you can find in extras package. Builds Mega-VPN and AIO have build-in all needed modules. Please use strongswan from entware!
  • Increase countdown after reboot router
  • Add ZTE MF195 3G modem support (ZTE MF192 variant x T-Mobile/EE UK)
  • TOR: Grow up data dir field

[RELEASE] 097

  • Add PPTP VPN client runtime and GUI
  • Fix OpenVPN settings page when using username authentication
  • Fix overidden mac address not being saved.
  • Add configuration options for the WAN ICMP Rate limiting
  • Total/Free NVRAM on overview page
  • TOR: Integration and GUI
  • New „Max” builtype for router with 8MB flash and w/o USB support
  • Driver for CH341 USB-serial adapter available in extras
  • Transmission: update to 2.60
  • Add support for RT-N66 (ONLY) 64K nvram (Upgrading from a 32K nvram firmware will wipeout all your data.)

[RELEASE] 095

  • fix working PS3 with minidlna
  • fix [bwlimit] link on overview-devices page
  • fix „ug” bug with running shell scripts on RT-N66u
  • remove garbage from Router Name
  • enable USB Support by default
  • enable SD Card support for RT-N66u by default
  • samba security fix – „root” credential remote code execution
  • wl_mitigation disabled by default
  • VLAN:
  • experimental VLAN/VID mapping GUI (allows creating VLANs with 802.1Q tags larger than 15 via GUI)
  • allow DMZ-style forwarding to alternative LAN bridges
  • PPTP:
  • allow specify ‚custom’ config/settings
  • dnsmasq to answer DNS queries on pppX interfaces
  • MultiSSID: some minor fixes

[RELEASE] 093

  • Busybox:
  • add WHOIS tool
  • fix ash repetear bug
  • Dropbear: 2012.55 update
  • Dnsmasq: 2.61 update
  • Captive Portal: lot of fixes and improvements
  • new style of splash.html
  • selectable interface (br0/1/2/3)
  • fixed PATH in shell files (Thx for @baranek from openlinksys.info)
  • some of patched from dd-wrt
  • add to autostart
  • Add SNMP configuration options for custom port and remote access
  • Remove „CPU % usage” on Status Overview page
  • Transmission: update 2.52
  • New theme for „Dark Knight” RT-N66U ( by Dark_Shadow)
  • Fix menu highlights (Captive Portal and BW Limiter)
  • lot of changes in buildtypes (some removed, add new)
  • RT-N builds only:
  • WL 5.100.138.20 SDK: wl binaries, et/bcm57xx drivers, dnsmq module
  • Asus RT-N10U: fix USB led
  • Asus RT-N15U: fix USB led
  • Support Asus RT-N53 (no 5GHz support, 2,4GHz only)
  • WNR3500Lv2 – Fixed display Free NVRAM on Admin->Configuration page (thx @krisan)
  • Add new Linksys E-series routers support (thx @tvlz)

[RELEASE] 092

  • Fix GUI broken in 090 in build without VPN
  • Fix PPTP when used over WAN setup using PPPoE
  • Transmission: lot of changes in compilation process:
  • update to 2.51
  • remove gettext from depends
  • add libiconv + patches from openwrt
  • revert transmission-remote tool as optional (TR_EXTRAS). Included in Mega-VPN and AIO builds
  • add EVENT_NOEPOLL=1 to startup script
  • result = very stable transmsision and very fast GUI
  • BW Limiter: few fixes:
  • fix default class for br3
  • fix default classes (br1\br2\br3) when default class br0 is enabled
  • curl update from 7.21.1 to 7.25.0
  • libevent update from 2.0.11 to 2.0.18
  • OpenSSL update from 1.0.0d to 1.0.1-stable including all teddy`s patches/changes
  • 3G Modem: Add ttyUSB1 and ttyUSB3 to modem device list

[RELEASE] 090

  • added MultiSSID
  • added PPTP server
  • change blocklist update function to not using transmission-remote nomore
  • remove transmission-remote will save lot of space
  • remote TR_EXTRAS (transmission-create)
  • OpenVPN update to 2.2.2
  • BW Limiter: default classes for each LAN (br1/2/3)

[RELEASE] 088

  • dnscrypt-proxy integration with GUI (basic -> network)
  • UDPxy integration with GUI by Teaman (advanced -> firewall)
  • qos-graphs fixed
  • status-overview fixed (works autorefresh and show buttons)
  • increase max of bwlimit entries from 40 to 80
  • removed user-define imq settings (advanced -> firewall)
  • don`t disable USB 3G box when storage checkbox is not checked
  • ups monitor service improvements
  • two new buildtypes (BT and Mega without VPN)
  • remove CIFS and JFFS from BT-VPN - was too big for 8MB routers
  • Mega-VPN is now only for router with more than 8MB flash
  • add UPS feature to AIO

[RELEASE] 087

  • fix usb_modeswitch (libusb error). 3G support will works now
  • USB Speed improved. Old schema detection enabled.
  • miniDLNA update from 1.0.22 to 1.0.24
  • little cosmetics changes in Overview page. Able to show/hide each section
  • IP Traffic: when/if set to 'disabled', we 'really' mean it
  • fix VLAN support for WNR3500Lv2 and remove JFFS support for this router
  • remove JFFS and SNMP from BT-VPN build. Image was to big for routers with 8MB flash memory.
  • propably this is the last release of K24

[RELEASE] 085

  • ip6tables fixed - "account" and "lan access" error
  • fix Toggle Visibility on QoS pages
  • fix syslog service when custom path is enabled
  • WOL should now works on br1,2,3
  • cosmetics changes in status-overview about LAN section
  • Transmission update from 2.42 to 2.50

Build 084V removed.