TechInfoDepot:DD-WRT/v24 pre sp2 K2.4 Features

From TechInfoDepot
Jump to navigationJump to search

This consolidated chart is a WIP. If you spot something wrong or needed to be added, pm me. DarkShadow
Need verification of pound and tcpdump

Build Features

  Micro (1) Micro Plus (2)(7) Micro Plus ssh (2)(7) Mini (1) Mini Hotspot Kaid (2) Mini USB (2) USB Generic (1) Mini USB FTP (2) Nokaid (1) OpenVPN JFFS Small (2) STD (1) STD NoKaid (2) STD NoKaid NoHotspot NoStor (2) STD NoKaid USB (2) VOIP (1) VPN (1)(3) Big (2)(4) Mega (1)(4)
Access Restrictions
Anchor Free
Asterisk                                  
Bandwidth Monitoring
Chillispot                      
Connection Warning Notifier      
Dynamic DNS
EoIP Support        
ext2 Support                
ext3 Support                          
Hotspot System                      
HTTP Redirect
HTTPS Support for Web Mngt              
IPv6 (5)                    
JFFS2 (6)          
kaid                            
MMC / SD Support                  
NoCat                    
OpenVPN                            
[[Project:DD-WRT/Pound|Pound]                                  
PPTP / PPTP Client      
ProFTPd                            
  Micro (1) Micro Plus (2)(7) Micro Plus ssh (2)(7) Mini (1) Mini Hotspot Kaid (2) Mini USB (2) USB Generic (1) Mini USB FTP (2) Nokaid (1) OpenVPN JFFS Small (2) STD (1) STD NoKaid (2) STD NoKaid NoHotspot NoStor (2) STD NoKaid USB (2) VOIP (1) VPN (1)(3) Big (2)(4) Mega (1)(4)
QoS
radvd              
Repeater / mBSSID
RFlow                
Samba / CIFS client                    
Samba / File Sharing (2)                                
Security Log      
SIPatH / Milkfish                              
SMTP Redirect
SNMP                  
SPI Firewall / IPtables
Sputnik                  
SSHd    
Syslogd
tcpdump                                
Telnetd
(Tx) power adjust
UPnP
USB                        
Wake On LAN
Wifidog                      
WPA / WPA2 Per / Ent
Wiviz      

Notes


(1)Official dd-wrt builds by Brainslayer
(2)Eko specialized Builds (For Broadcom device only)
(3)Smaller VPN JFFS builds are available for 4MB units: downloads/others/eko
(4)Only on DD-WRT v24 (8MB+ flash required)
(5)Apparently, IPv6-related features DO NOT work by default in DD-WRT v24. See IPv6 on v24.
(6)Not available on VPN-builds for v24sp1 (see prerequisites for JFFS).
(7) CFE Compressor needed to run. See (http://www.dd-wrt.com/phpBB2/viewtopic.php?t=38844).

The files for v24 contain six versions:

filename description
dd-wrt.v24_<type>_asus.trx Web interface version for flashing. See Flash Your Asus WL-500G Deluxe
dd-wrt.v24_<type>_generic.bin Generic version for flashing via web interface on all supported devices (including Linksys WRT54G/GL/GS) and for flashing Siemens SE505 with boot tftp on 192.168.2.1
dd-wrt.v24_<type>_wrt54g.bin tftp versions for WRT54G. You CAN use this to flash via web interface but do so only AFTER you have done so using the mini version. These versions were just made specifically for TFTPing to those routers. (v5/v6 note: Since the WRT54G/GS v5-v6 uses a modified WAP54Gv3 once made 'linux ready', it will not accept these standard WRT54G/GS firmwares. You must use the 'generic' build for TFTPing to these units).
dd-wrt.v24_<type>_wrt54gs.bin tftp versions for WRT54GS. You CAN use this to flash via web interface but do so only AFTER you have done so using the mini version. These versions were just made specifically for TFTPing to those routers.
dd-wrt.v24_<type>_wrt54gsv4.bin tftp versions for WRTGSv4. You CAN use this to flash via web interface but do so only AFTER you have done so using the mini version. These versions were just made specifically for TFTPing to those routers.
dd-wrt.v24_<type>_wrtsl54gs.bin tftp versions for WRTSL54GS. You CAN use this to flash via web interface but do so only AFTER you have done so using the mini version. These versions were just made specifically for TFTPing to those routers.
dd-wrt.v24_<type>_moto.trx For initial Flash Your Motorola WR850G (Micro and Mini builds ONLY)

where <type> is a placeholder for mini, std, voip, etc. For upgrading from the original Linksys firmware, please use the mini version first and flash it from the web interface. After this first flash you can then upgrade to any distribution of your choice.