TRENDnet TEW-735AP

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
N300 High Power PoE Access Point
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
TRENDnet TEW-735AP V1.0R
FCC ID
Type
access point
CPU1
CPU1 Type
Lexra RLX4181
CPU1 Speed
390 MHz
Flash1 Chip
Macronix Model?
Flash1 Size
? MiB
RAM1 Size
? MiB
RAM1 Chip
Brand? Model?
ETH chip1
Ethernet Port Count
1-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types
none specified
PoE
802.3af, standard
Power
12 VDC, 1 A
Connector type
barrel
Serial Port (UART)
yes, 3.3V TTL

Additional chips
2.4GHz Power Amplifier IC;RFMD;RF5602;RF, 5602, BW4D;2;

Other

Default SSID: TRENDnet735_2.4GHz_XXXX
Default IP address: 192.168.10.100
the IP 192.168.10.100 is used by 13 additional devices
of which 13 are TRENDnet devices
Default login user: admin
Default login password: randomly generated
admin:randomly generated credentials used by 27 additional devices
of which 11 are TRENDnet devices

Manuf/OEM/ODM
Retail
FCC approval date 13 September 2013
Country of manuf Taiwan
Radio 1
Chip1
Realtek RTL8192CE
Wireless interface OUI
none specified
Antenna Connector Type
U.FL
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented TRENDnet device with specifications, see TRENDnet.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class


Overview

"7016A0510008" and "V-1.00" is silkscreened on the board in the FCC photos. The same text is found on the boards of the EnGenius EAP300 and EnGenius EAP150.

The Wi-Fi radio is using two RFMD RF5602 power amplifier ICs.

Default settings are per the FCC manual. They may not be 100% accurate.

The power adapter shown in the FCC external photos is a DVE DSA-12G-12 FUS 120120 (100-240VAC ~ 50/60Hz, 0.3A -> 12VDC, 1A).