TRENDnet TEW-732BR

From TechInfoDepot
Jump to navigationJump to search
bgn
wireless router
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Gargoyle
Status Unknown
Platform
BrandModelRev
TRENDnet TEW-732BR V1.0R
FCC ID
Type
wireless router
CPU1
Atheros AR1321
CPU1 Speed
535 MHz
Flash1 Chip
GigaDevice 25Q64BSIG
Flash1 Size
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip
Nanya NT5TU32M16DG-AC
ETH chip1
Atheros AR1321
Ethernet Port Count
1-WAN
4-100MbE-LAN

802dot11 OUI: D8:EB:97 (10 E, 9 W)
Ethernet OUI: D8:EB:97 (10 E, 9 W)

Expansion IF types
none specified
Connector type
barrel
Serial Port (UART)
4-pin header
JTAG Port
14-pin header, unpopulated
Other

Default SSID: TRENDnet732-XXXX
Default IP address: 192.168.10.1
the IP 192.168.10.1 is used by 113 additional devices
of which 45 are TRENDnet devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1315 additional devices
of which 48 are TRENDnet devices

Manuf/OEM/ODM
3rd Party Firmware Support
OpenWrt • (List | Dev | DLs)
Retail
FCC approval date 27 February 2013
UPC 710931130089
(UPC DB, On eBay)
ASIN B00E37JFH0 Flag of the United States.svg
Country of manuf China
Radio 1
Chip1
Atheros AR1321
Wireless interface OUI
D8:EB:97
Antenna Connector Type
U.FL
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

For a list of all currently documented TRENDnet device with specifications, see TRENDnet.

N300 Wireless Router

This router sits upright like the ZyXEL NBG5715.

"Rev:A0-2" and "Made In China" is silkscreened on the board in the FCC photos.

The WiSoC used is an AR1321-AL1A.

Default settings are per the FCC manual. The XXXX in the default SSID pattern appears to be lower-case hex digits.

The FCC label, however, specifies the default SSID pattern as TRENDnet732XXXX.

(The board contain a 4-pin UART (serial) output, as well as a 14-pin output (possibly for JTAG?).
Headers are unpopulated, need to be soldered. Board also has silkscreen and holes for one USB)