TP-LINK TL-WR1043N v5.x

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bgn (N450)
450Mbps Wireless N Gigabit Router
Homepage
Downloads
Wikipedia
3rd Party Firmware
dd-wrt
OpenWrt
Tomato any flavor
Incompatible
Gargoyle
Status Unknown
Platform
BrandModelRev
TP-LINK TL-WR1043N v5.x
FCC ID
Board ID
2050500298
Type
wireless router
CPU1
Qualcomm Atheros QCA9563
CPU1 Type
MIPS 74Kc
CPU1 Speed
775 MHz
Flash1 Chip
Winbond W25Q128FVSG
Flash1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip
Zentel A3R12E40CBF-8E
ETH chip1
Qualcomm Atheros QCA9563
Switch
Qualcomm Atheros QCA8337N
Ethernet Port Count
1-WAN
4-1GbE-LAN
Wired Standard
IEEE 802.3i/3u/3ab

802dot11 OUI: C0:4A:00 (4 E, 4 W)
Ethernet OUI: C0:4A:00 (4 E, 4 W)

Stock bootloader
U-Boot 1.1.4 ap152
Stock FW OS
Linux 3.3.8
Expansion IF types
none specified
Power
9 VDC, 0.85 A
Connector type
barrel
Other

Default SSID: TP-LINK_XXXXXX (31 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 795 additional devices
of which 97 are TP-LINK devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1332 additional devices
of which 279 are TP-LINK devices

Manuf/OEM/ODM
3rd Party Firmware Support
DD-WRT • (List)
, OpenWrt • (List | Dev | DLs)
Retail
Availability (EU/US)
FCC approval date 02 November 2016
ASIN B002YLAUU8 Flag of the United States.svg
multiple uses
Country of manuf China
Radio 1
Chip1
Qualcomm Atheros QCA9563
Wireless interface OUI
C0:4A:00
Antenna Connector Type
Fixed
MIMO status
3x3:3
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 450 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
TP-LINK TL-WR1043N v5.xQualcomm AtherosQualcomm Atheros
TP-LINK TL-WR1043ND v1.xAtherosAtherosAtheros
TP-LINK TL-WR1043ND v2.xQualcomm AtherosQualcomm Atheros
TP-LINK TL-WR1043ND v3.xQualcomm AtherosQualcomm Atheros
TP-LINK TL-WR1043ND v4.xQualcomm AtherosQualcomm Atheros

For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

For a list of all currently documented TP-LINK device with specifications, see TP-LINK.

450 Mbps - 3SS 2.4GHz 802.11n (40MHz chan.) = N450 class

Overview

"2050500298" is silkscreened on the board.

FCC ID: TE7WR1043NV5 (2016-11-02)

Links of Interest

Flashing

Flashing dd-wrt

Supported by dd-wrt as of = tl-wr1043nv5 build 50313 20221003

On the DD-WRT Forum, Ticket 6300

Please insert instructions here

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
Support started version: 18.06.0
Current supported version: 23.05.0

Please insert instructions here

JTAG-Serial Info

Serial

Bootlog
U-Boot 1.1.4-g6ce9309a-dirty (Oct 26 2016 - 09:20:53)

ap152 - Dragonfly 1.0

DRAM:  64 MB
Top of RAM usable for U-Boot at: 84000000
Reserving 393k for U-Boot at: 83f9c000
Reserving 16448k for malloc() at: 82f8c000
Reserving 44 Bytes for Board Info at: 82f8bfd4
Reserving 36 Bytes for Global Data at: 82f8bfb0
Reserving 128k for boot params() at: 82f6bfb0
Stack Pointer at: 82f6bf98
Now running in RAM - U-Boot at: 83f9c000
Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x18
flash size 16MB, sector count = 256
Flash: 16 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ath_gmac_enet_initialize...
No valid address in Flash. Using fixed address
ath_gmac_enet_initialize: reset mask:c02200
athr_mgmt_init ::done
Dragonfly  ----> S17 PHY *
athrs17_reg_init: complete
SGMII in forced mode
athr_gmac_sgmii_setup SGMII done
: cfg1 0x80000000 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
eth0 up
eth0
Setting 0x181162c0 to 0x20402100
factory boot check integer ok.
factory boot load fs uboot len 131072 to addr 0x80010000.
Hit any key to stop autoboot:  0
## Starting application at 0x80010000 ...


U-Boot 1.1.4-g6ce9309a-dirty (Oct 26 2016 - 09:24:21)

ap152 - Dragonfly 1.0

DRAM:  64 MB
Top of RAM usable for U-Boot at: 84000000
Reserving 122k for U-Boot at: 83fe0000
Reserving 16448k for malloc() at: 82fd0000
Reserving 44 Bytes for Board Info at: 82fcffd4
Reserving 36 Bytes for Global Data at: 82fcffb0
Reserving 128k for boot params() at: 82faffb0
Stack Pointer at: 82faff98
Now running in RAM - U-Boot at: 83fe0000
Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x18
flash size 16MB, sector count = 256
Flash: 16 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ath_gmac_enet_initialize...
No valid address in Flash. Using fixed address
ath_gmac_enet_initialize: reset mask:c02200
athr_mgmt_init ::done
Dragonfly  ----> S17 PHY *
athrs17_reg_init: complete
SGMII in forced mode
athr_gmac_sgmii_setup SGMII done
: cfg1 0x80000000 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
eth0 up
eth0
Setting 0x181162c0 to 0x20402100
Hit any key to stop autoboot:  0
## Booting image at 9f040000 ...
   Image Name:   MIPS OpenWrt Linux-3.3.8
   Created:      2016-10-25   3:58:50 UTC
   Image Type:   MIPS Linux Multi-File Image (lzma compressed)
   Data Size:    1083030 Bytes =  1 MB
   Load Address: 80060000
   Entry Point:  80060000
   Contents:
   Image 0:  1083022 Bytes =  1 MB
   Verifying Checksum at 0x9f040040 ...OK
   Uncompressing Multi-File Image ... OK
No initrd
## Transferring control to Linux (at address 80060000) ...
## Giving linux memsize in bytes, 67108864

Starting kernel ...

[    0.000000] Linux version 3.3.8 (HQL@localhost.localdomain) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #2 Mon Oct 10 12:11:34 HKT 2016
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019750 (MIPS 74Kc)
[    0.000000] SoC: Qualcomm Atheros QCA956X rev 0
[    0.000000] Clocks: CPU:775.000MHz, DDR:650.000MHz, AHB:258.333MHz, Ref:25.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] User-defined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00004000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00004000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  console=ttyS0,115200 board=AP152 rootfstype=squashfs init=/etc/preinit mtdparts=spi0.0:128k(factory-uboot),128k(u-boot),1152k(uImage),14912k(rootfs),64k@0xff0000(ART) mem=64M rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 61260k/65536k available (2316k kernel code, 4276k reserved, 575k data, 180k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:83
[    0.000000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.060000] pid_max: default: 32768 minimum: 301
[    0.060000] Mount-cache hash table entries: 512
[    0.070000] Initialized recycle list for cpu 0.
[    0.070000] NET: Registered protocol family 16
[    0.080000] gpiochip_add: registered GPIOs 0 to 22 on device: ath79
[    0.080000] MIPS: machine is TP-LINK WR1043N v5 support
[    0.090000] ar724x-pci ar724x-pci.0: PCIe link is down
[    0.090000] registering PCI controller with io_map_base unset
[    0.300000] bio: create slab <bio-0> at 0
[    0.300000] PCI host bridge to bus 0000:00
[    0.310000] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
[    0.310000] pci_bus 0000:00: root bus resource [io  0x0001]
[    0.320000] Switching to clocksource MIPS
[    0.320000] NET: Registered protocol family 2
[    0.330000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.330000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.340000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.340000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.350000] TCP reno registered
[    0.350000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.360000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.360000] NET: Registered protocol family 1
[    0.380000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.380000] msgmni has been set to 119
[    0.390000] io scheduler noop registered
[    0.390000] io scheduler deadline registered (default)
[    0.400000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.420000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[    0.430000] console [ttyS0] enabled, bootconsole disabled
[    0.430000] console [ttyS0] enabled, bootconsole disabled
[    0.440000] m25p80 spi0.0: found w25q128, expected m25p80
[    0.450000] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    0.450000] 5 cmdlinepart partitions found on MTD device spi0.0
[    0.460000] Creating 5 MTD partitions on "spi0.0":
[    0.460000] 0x000000000000-0x000000020000 : "factory-uboot"
[    0.470000] 0x000000020000-0x000000040000 : "u-boot"
[    0.480000] 0x000000040000-0x000000160000 : "uImage"
[    0.480000] 0x000000160000-0x000000ff0000 : "rootfs"
[    0.490000] mtd: partition "rootfs" set to be root filesystem
[    0.500000] 0x000000ff0000-0x000001000000 : "ART"
[    0.500000] flash_chrdev : flash_chrdev_init
[    0.640000] ag71xx_mdio: probed
[    0.650000] eth0: Atheros AG71xx at 0xb9000000, irq 4
[    1.230000] eth0: Atheros AR8327 switch driver attached.
[    4.150000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316]
[    4.170000] TCP cubic registered
[    4.170000] NET: Registered protocol family 17
[    4.170000] Bridge firewalling registered
[    4.180000] 8021q: 802.1Q VLAN Support v1.8
[    4.180000] ### of_selftest(): No testcase data in device tree; not running tests
[    4.200000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[    4.200000] Freeing unused kernel memory: 180k freed
- preinit -
- regular preinit -
jffs2 not ready yet; using ramdisk
- init -
[    6.460000] liblog: module license 'unspecified' taints kernel.
[    6.460000] Disabling lock debugging due to kernel taint
[    6.730000] NET: Registered protocol family 10
[    6.870000] SCSI subsystem initialized
[    7.040000] Button Hotplug driver version 0.4.1
[    7.120000] PPP generic driver version 2.4.2
[    7.140000] tun: Universal TUN/TAP device driver, 1.6
[    7.140000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    7.220000] PPP MPPE Compression module registered
[    7.230000] NET: Registered protocol family 24
[    7.330000] L2TP core driver, V2.0
[    7.340000] L2TP netlink interface
[    7.420000] IPv6 over IPv4 tunneling driver
[    7.460000] GRE over IPv4 demultiplexor driver
[    7.500000] GRE over IPv4 tunneling driver
[    7.550000] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    7.670000] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.840000] nf_conntrack version 0.5.0 (960 buckets, 3840 max)
[    8.070000] PPPoL2TP kernel driver, V2.0
[    8.110000] PPTP driver version 0.8.5
[    8.470000] xt_time: kernel timezone is -0000
[    8.840000] nf_conntrack_rtsp v0.6.21 loading
[    8.850000] nf_nat_rtsp v0.6.21 loading
[    8.900000] Netfilter messages via NETLINK v0.30.
[    8.940000] ctnetlink v0.93: registering with nfnetlink.
[    9.200000] ssdk_plat_init start
[    9.200000] Register QCA PHY driver
[    9.320000] qca-ssdk module init succeeded!
[    9.470000] fuse init (API version 7.18)
reloadconfig() begin:
reloadconfig() end:
mergeconfigbycountry() begin
user has set country
mergeconfigbycountry() do nothing end
reload_profile() begin:
reload_profile() end:

Please press Enter to activate this console. [   12.190000] ADDRCONF(NETDEV_UP): eth0: link is not ready
GMT+08:00
Fri Jan  1 00:00:00 GMT 2016
[SWITCH DEBUG] Clear Port(0) PVID
[SWITCH DEBUG] Clear Port(1) PVID
[SWITCH DEBUG] Clear Port(2) PVID
[SWITCH DEBUG] Clear Port(3) PVID
[SWITCH DEBUG] Clear Port(4) PVID
[SWITCH DEBUG] Clear Port(5) PVID
[SWITCH DEBUG] Flush vlan entries.
[SWITCH DEBUG] Create VLAN VID=1
[SWITCH DEBUG] Add tagged port(0) to VLAN(1)
[SWITCH DEBUG] Add untagged port(1) to VLAN(1)
[SWITCH DEBUG] Add untagged port(2) to VLAN(1)
[SWITCH DEBUG] Add untagged port(3) to VLAN(1)
[SWITCH DEBUG] Add untagged port(4) to VLAN(1)
[SWITCH DEBUG] Set Port(0) PVID(1)
[SWITCH DEBUG] Set Port(0) ingress to secure
[SWITCH DEBUG] Set Port(1) PVID(1)
[SWITCH DEBUG] Set Port(1) ingress to secure
[SWITCH DEBUG] Set Port(2) PVID(1)
[SWITCH DEBUG] Set Port(2) ingress to secure
[SWITCH DEBUG] Set Port(3) PVID(1)
[SWITCH DEBUG] Set Port(3) ingress to secure
[SWITCH DEBUG] Set Port(4) PVID(1)
[SWITCH DEBUG] Set Port(4) ingress to secure
[SWITCH DEBUG] Create VLAN VID=4094
[SWITCH DEBUG] Add tagged port(0) to VLAN(4094)
[SWITCH DEBUG] Add untagged port(5) to VLAN(4094)
[SWITCH DEBUG] Set Port(0) PVID(4094)
[SWITCH DEBUG] Set Port(0) ingress to secure
[SWITCH DEBUG] Set Port(5) PVID(4094)
[SWITCH DEBUG] Set Port(5) ingress to secure
[SWITCH DEBUG] Set Port(0) PVID(0)
[   13.860000] device eth0 entered promiscuous mode
[   13.870000] ADDRCONF(NETDEV_UP): eth0.4094: link is not ready
[   14.210000] eth0: link up (1000Mbps/Full duplex)
[   14.230000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   14.230000] ADDRCONF(NETDEV_CHANGE): eth0.4094: link becomes ready
[   14.310000] ADDRCONF(NETDEV_UP): lo: link is not ready
[   14.320000] ADDRCONF(NETDEV_UP): ip6tnl0: link is not ready
[   14.330000] ADDRCONF(NETDEV_UP): sit0: link is not ready
[   14.330000] ADDRCONF(NETDEV_UP): gre0: link is not ready
[   14.340000] ADDRCONF(NETDEV_UP): bond0: link is not ready
[   15.240000] ar8216_read_status_2991: eth0.4094 carrier off!
[   15.360000] ADDRCONF(NETDEV_UP): eth0.4094: link is not ready
Loading defaults
Loading synflood protection
Adding custom chains
Loading zones
Loading forwardings
Loading rules
Loading redirects
Loading includes
Optimizing conntrack
Loading interfaces
Loading tpcmd
[   19.670000] device eth0 left promiscuous mode
[   19.670000] del ct event: 2 dev_name: eth0.4094
[   19.680000]  start clean up ct iterate..
[   19.690000] device eth0 entered promiscuous mode
[   19.710000] del ct event: 2 dev_name: eth0.1
[   19.710000]  start clean up ct iterate..
[   19.730000] device eth0.1 entered promiscuous mode
[   19.730000] br-lan: port 1(eth0.1) entered forwarding state
[   19.740000] br-lan: port 1(eth0.1) entered forwarding state
loading access_control
[   20.460000] ar8216_read_status_2991: eth0.1 carrier off!
[   20.470000] ar8216_read_status_2991: eth0.4094 carrier off!
[   20.470000] br-lan: port 1(eth0.1) entered disabled state
loading basic_security
[   23.990000]  start clean up ct iterate..
conntrack v1.0.0 (conntrack-tools): connection tracking table has been emptied.
[   24.290000]  start clean up ct iterate..
[   30.190000]  start clean up ct iterate..
Normal env generate
Flush nat forwarding chain
loading administration management
fw unload_local_mgnt
loading parental_control

 SSDK Init OK![   32.440000] enable:1
[   32.440000] bg task init successfull!
[   32.440000] host_helper_init start
[   32.450000] /proc/qca_switch/nf_athrs17_hnat is created
[   32.460000] /proc/qca_switch/nf_athrs17_hnat_wan_type is created
[   32.470000] /proc/qca_switch/nf_athrs17_hnat_ppp_id is created
[   32.470000] /proc/qca_switch/nf_athrs17_hnat_udp_thresh is created
[   32.480000] /proc/qca_switch/nf_athrs17_hnat_wan_ip is created
[   32.480000] /proc/qca_switch/nf_athrs17_hnat_ppp_peer_ip is created
[   32.490000] /proc/qca_switch/nf_athrs17_hnat_ppp_peer_mac is created
[   32.500000] /proc/qca_switch/nf_athrs17_hnat_wan_mac is created
[   32.500000] /proc/qca_switch/nf_athrs17_hnat_ppp_id2 is created
[   32.510000] /proc/qca_switch/nf_athrs17_hnat_ppp_peer_mac is created
[   32.520000] Adding ACL rules 15 - upnp_ssdp_add_acl_rules
[   32.540000] ACL is not yet enabled. Enabling...
[   32.550000] Adding ACL rules 7 - ipv6_snooping_solicted_node_add_acl_rules
[   32.600000] Adding ACL rules 11 - ipv6_snooping_sextuple0_group_add_acl_rules
[   32.650000] Adding ACL rules 13 - ipv6_snooping_quintruple0_1_group_add_acl_rules
[   32.700000] Hello, nat helper module for 1.1!
[   32.720000] register inet_notifier###

operate done.


 SSDK Init OK![   32.720000] enable:0
[   32.730000] unregister inet_notifier###
[   32.730000] /proc/qca_switch/nf_athrs17_hnat removed
[   34.710000] Goodbye, nat helper module!

operate done.

[   39.550000] ****Address of trace_timer :832fe610
[   40.110000] ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, WRITE_EEPROM, TX_DATA_SWAP, RX_DATA_SWAP, 11D)
[   40.220000] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
[   40.350000] ath_dfs: Version 2.0.0
[   40.350000] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
[   40.400000] ath_spectral: Version 2.0.0
[   40.400000] Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved
[   40.410000] SPECTRAL module built on Oct 25 2016 11:22:49
[   40.550000] ath_tx99: Version 2.0
[   40.550000] Copyright (c) 2010 Atheros Communications, Inc, All Rights Reserved
[   40.810000] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
[   43.490000] __ath_attach: Set global_scn[0]
[   43.490000] *** All the minfree values should be <= ATH_TXBUF-32, otherwise default value will be used instead ***
[   43.500000] ACBKMinfree = 48
[   43.500000] ACBEMinfree = 32
[   43.510000] ACVIMinfree = 16
[   43.510000] ACVOMinfree = 0
[   43.510000] CABMinfree = 48
[   43.520000] UAPSDMinfree = 0
[   43.520000] ATH_TXBUF=540
[   43.530000] Enterprise mode: 0x03bda000
[   43.540000]
[   43.540000] ART Version : -48.0.0
[   43.540000] SW Image Version : -48.0.0.0.0
[   43.550000] Board Revision :
[   43.550000] ar9300_attach: nf_2_nom -110 nf_2_max -60 nf_2_min -125
[   43.560000] SPECTRAL : get_capability not registered
[   43.560000] HAL_CAP_PHYDIAG : Capable
[   43.570000] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 231)
[   43.580000] SPECTRAL : get_capability not registered
[   43.580000] HAL_CAP_RADAR   : Capable
[   43.580000] SPECTRAL : Need to fix the capablity check for SPECTRAL
[   43.580000]  (spectral_attach : 236)
[   43.590000] SPECTRAL : get_capability not registered
[   43.600000] HAL_CAP_SPECTRAL_SCAN : Capable
[   43.600000] SPECTRAL : get_tsf64 not registered
[   43.610000] spectral_init_netlink 65 NULL SKB
[   43.610000] SPECTRAL : No ADVANCED SPECTRAL SUPPORT
[   43.620000] SPECTRAL :----- module attached
[   43.620000] Green-AP : Green-AP : Attached
[   43.620000]
[   43.630000] ath_get_caps[6169] rx chainmask mismatch actual 7 sc_chainmak 0
[   43.640000] ath_get_caps[6144] tx chainmask mismatch actual 7 sc_chainmak 0
[   43.650000] band steering initialized for direct attach hardware
[   43.660000] ieee80211_bsteering_attach: Band steering initialized
[   43.660000] ath_attach_dfs[12687] dfsdomain 1
[   43.680000] SPECTRAL : module already attached
[   43.680000] osif_wrap_attach:296 osif wrap attached
[   43.690000] osif_wrap_devt_init:916 osif wrap dev table init done
[   43.700000] ath_tx_paprd_init sc 824e0000 PAPRD disabled in HAL
[   43.700000] wifi0: Atheros 956X: mem=0xb8100000, irq=47
[   43.710000] ath_pci: SmartAntenna-DRT-0.1 (Atheros/multi-bss)
[   44.510000] ath_attach_dfs[12687] dfsdomain 1
[   44.630000] wlan_vap_create : enter. devhandle=0x82650380, opmode=IEEE80211_M_HOSTAP, flags=0x3
[   44.640000] wlan_vap_create : exit. devhandle=0x82650380, opmode=IEEE80211_M_HOSTAP, flags=0x3.
[   44.650000] VAP device ath0 created osifp: (8318b380) os_if: (824f8000)
[   44.680000] Set freq vap 0 stop send + 824f8000
[   44.680000] Set freq vap 0 stop send -824f8000
[   44.820000] Set wait done --824f8000
[   44.850000] WARNING: Fragmentation with HT mode NOT ALLOWED!!
[   44.870000] Set freq vap 0 stop send + 824f8000
[   44.870000] Set freq vap 0 stop send -824f8000
[   45.010000] Set wait done --824f8000
[   45.110000]
[   45.110000]  DES SSID SET=
[   45.120000]
[   45.120000]  DES SSID SET=TP-LINK_1ED0
@@@@@@@@@@psk-mixed/tkip+aes
[   45.450000]  ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1
[   45.460000]  DEVICE IS DOWN ifname=ath0
[   45.470000]  DEVICE IS DOWN ifname=ath0
[   45.740000] device ath0 entered promiscuous mode
[   45.930000] br-lan: port 2(ath0) entered forwarding state
[   45.930000] br-lan: port 2(ath0) entered forwarding state
[   45.950000] 8021q: adding VLAN 0 to HW filter on device ath0
[   46.650000] fast-classifier: starting up
[   46.650000] fast-classifier: registered
phyport start .......
SETUP port (5) duplex: 1000 full autoneg: on!
loading qos
http://192.168.0.1/webpages/wan_error.html
192.168.0.1
http://192.168.0.1/webpages/wan_error.html
192.168.0.1
 3200 root      1772 S    /usr/sbin/crond -c /etc/crontabs -l 5


Pictures

User Images