SerComm VD625/Serial info

From TechInfoDepot
Jump to navigationJump to search


Serial Bootlog:
Linux version 3.4.11-rt19 (root@ubuntu) (gcc version 4.6.2 
 (Buildroot 2011.11) ) #1 SMP PREEMPT Thu May 19 02:26:05 CST 2016
963168MBV3 prom init

CPU revision is: 0002a080 (Broadcom BMIPS4350)
Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
Brought up 2 CPUs

Base: 4.16_02 / 4.1602-1.0.38-116.118
CFE version 1.0.38-116.118 for BCM963268 (32bit,SP,BE)
Build Date: Fri Jan 29 14:08:03 CST 2016 (adam@localhost)

Chip ID: BCM63168D0, MIPS: 400MHz, DDR: 400MHz, Bus: 200MHz
Main Thread: TP0
Memory Test Passed
Total Memory: 134217728 bytes (128MB)
Boot Address: 0xb8000000

NAND ECC BCH-4, page size 0x800 bytes, spare size used 64 bytes
NAND flash device: , id 0xc8da block 128KB size 262144KB
Board IP address                  : 192.168.1.1:ffffff00  
Host IP address                   : 192.168.1.100  
Gateway IP address                :   
Run from flash/host/tftp (f/h/c)  : f  
Default host run file name        : vmlinux  
Default host flash file name      : bcm963xx_fs_kernel  
Boot delay (0-9 seconds)          : 1  
Default host ramdisk file name    :   
Default ramdisk store address     :   
Board Id (0-29)                   : 963168MBV3  
Number of MAC Addresses (1-32)    : 16  
Base MAC Address                  : b4:a5:ef:73:b5:c8  
PSI Size (1-64) KBytes            : 24  
Enable Backup PSI [0|1]           : 0  
System Log Size (0-256) KBytes    : 0  
Auxillary File System Size Percent: 0  
Main Thread Number [0|1]          : 0  
WLan Feature                      : 0x00  
Voice Board Configuration (0-19)  : LE9672  

External switch id = 53125