Info derived from
boot log
|
Rescueing Boot for the ISL3893, version 0.5.1.0
Copyright (C) 1993-2002 Intersil Americas Inc. All Rights Reserved.
MAC Address: 00.13.f7.09.89.d6
Forcing soft reset from Bootloader▒
Rescueing Boot for the ISL3893, version 0.5.1.0
Copyright (C) 1993-2002 Intersil Americas Inc. All Rights Reserved.
MAC Address: 00.13.f7.09.89.d6
Boot: start searching for image... Found
Boot: Checking Image CRC32... Okay.
Disable PORT 0
NetMall System Boot
Copyright 2003 Accton, Inc.
CPU: Intersil ISL3893 Processor
POST Version: 0.00.08
Creation Date: 2004.09.07
Press <space> key three times to stop auto-boot...
0
Verifying product code......PASS
Boot Product Code!!!
Reg0x00 = 0xFFFF
Reg0x01 = 0x880F
Reg0x02 = 0x0000
Reg0x03 = 0x840F
Reg0x04 = 0x0000
Reg0x05 = 0x840F
Reg0x06 = 0x0000
Reg0x07 = 0x840F
Reg0x08 = 0x840F
Reg0x09 = 0x881F
Reg0x0A = 0x5802
Reg0x0B = 0x8001
Reg0x0C = 0x0000
Reg0x0D = 0x0000
Reg0x0E = 0xFA50
Reg0x0F = 0xFA50
Reg0x10 = 0x0040
Reg0x11 = 0xE320
Reg0x12 = 0x3600
Reg0x13 = 0x01D5
Reg0x14 = 0x01D4
Reg0x15 = 0x0101
Reg0x16 = 0x01D5
Reg0x17 = 0x01D5
Reg0x18 = 0x01D5
Reg0x19 = 0xFFD5
Reg0x1A = 0xFFD5
Reg0x1B = 0xFFD5
Reg0x1C = 0xFFD5
Reg0x1D = 0xFFD5
Reg0x1E = 0xFFD5
Reg0x1F = 0xFFD5
Reg0x20 = 0x81D5
Reg0x21 = 0xFFD5
Reg0x22 = 0xFFD5
OID_CTRL_SetFrequency: New channel is 3 !
OID_CTRL_SetSSID: Ne
Crash log handle begin:007C0048
w SSID is 'ISL3893_11G' !
wlanSetSSIDBrdCast: Hide real SSID!
OID_CTRL_SetNitroMode: set value = 1000
OID_CTRL_SetSTATimout: set value = 600
DHCPC:DHCP Client Started.
DHCPS:DHCP Server Started.
==========================================================================
WG4005D-17 project:
Command Line Interface. v.1.00.024 2004.1215
MVC version: V1.0.2.1
==========================================================================
cmd> ap_cfg_Init: ap_cfg.wireless_mode_admin = 2
ap_cfg_SetwirelessModeAdmin: admin = 2
OID_CTRL_SetSSID: New SSID is 'SMC' !
OID_CTRL_SetSSID: New SSID is 'SMC' !
wlanSetSSIDBrdCast: Show real SSID!
WLAN_IfStop: device state is 2 ,type is 1!
WLAN_IfStop: Device already running!
wlanReset: Device already running!
OID_CTRL_SetFrequency: New channel is 6 !
OID_CTRL_SetSSID: New SSID is 'SMC' !
OID_CTRL_SetSSID: New SSID is 'SMC' !
wlanSetSSIDBrdCast: Show real SSID!
OID_CTRL_SetNitroMode: set value = 1000
OID_CTRL_SetSTATimout: set value = 600
add listen port
Discovery >> Success to get if addr = 102a8c0
arp_rtrequest: bad gateway value
>> Discovery Serial NO = ...
>> Discovery Serial NO = S540006875 ...
Discovery >> Ready to be discovered
|
shell help
|
cmd> help
Command Line Interface v0.01
======================================================
rmem : Read memory.
Usage : rmem <Address> [Num of Words]
wmem : Write memory.
Usage : wmem <Address> <Data0> [Data1] ... [Data7]
rmi : read mii phy register.
Usage : rmi <phy addr> <reg>
wmi : write mii phy register.
Usage : wmi <phy addr> <reg> <Data>
time : Get current system time.
Usage : time
settime : Set system time.
Usage : settime <hh:mm:ss> [yy/mm/dd] [TZ(GMT +/- hour)]
help : List all commands.
Usage : help
mkdir : Make directories.
Usage : mkdir <dir>
create : Create files.
Usage : create <file>
cat : Concatenate files.
Usage : cat <file>
ls : List directory contents.
Usage : ls [dir]
rm : Remove files.
Usage : rm <file>
rmdir : Remove directories.
Usage : rmdir <DIRECTORY>
copy : Copy files.
Usage : copy <source> <destination>
nvclear : Clear all of the NVFS files.
Usage : nvclear
routeShow : Show Route.
Usage : routeShow
routeAdd : Add Route.
Usage : routeAdd <dest> <mask> <gateway>
routeDel : Del Route.
Usage : routeDel <dest> <mask> <gateway>
routeModify: Modify Route.
Usage : routeModify <index> <dest> <mask> <gateway>
defaultRouteSet: Set Route Status.
Usage : defaultRouteSet <mode : 1|2 = enable|disable>
defaultRouteGet: Get Route Status.
Usage : defaultRouteGet
mbufShow : Show Mbuf statistics.
Usage : mbufShow
ifShow : Dispaly network interface.
Usage : ifShow <ifname>
ifAllShow : Dispaly all network interface.
Usage : ifAllShow
taskShow : Show Task informations.
Usage : taskShow
semShow : Show Semaphore informations.
Usage : semShow
timerShow : Show Timer informations.
Usage : timerShow
memShow : Show memory pool informations.
Usage : memShow
msgqShow : Show message queue informations.
Usage : msgqShow
eventShow : Show event group informations.
Usage : eventShow
knlShow : Show kernel resource informations.
Usage : knlShow
ipConfig : Configure interface address and subnet mask.
Usage : ipConfig [ifname] [ip] [subnet mask]
ipStatus : Change IP status. 1 for Enabled, 2 for Disabled..
Usage : ipStatus [ifname] [status]
ipAdd : Add alias IP address..
Usage : ipAdd [ifname] [ip] [netmask]
ipDel : Delete alias IP address..
Usage : ipAdd [ifname] [ip] [netmask]
ethmib : Show/Reset ethernet port MIB counters.
Usage : ethmib [reset]
arpAdd : Add an ARP entry to ARP table..
Usage : arpAdd [ip] <Ethernet Address>
arpDel : Delete an ARP entry..
Usage : arpDel [ip]
arpGet : Get the hardware address of a specify IP..
Usage : arpGet [ip]
arpFlush : Flush ARP table..
Usage : arpFlush [ifname]
ping : Ping a host..
Usage : ping [ip] [ms]
dhcpcRelease: Release the IP address for the specified interface..
Usage : dhcpcRelease [ifname]
dhcpcRenew: Renew the IP address for the specified interface..
Usage : dhcpcRenew [ifname]
dhcpcLog : Show dhcpclog..
Usage : dhcpcLog
dhcpcLogTest: Test dhcpclog..
Usage : dhcpcLogTest [line_num]
dhcpsStart: Start DHCP Server..
Usage : dhcpsStart
dhcpsStop : Stop DHCP Server..
Usage : dhcpsStop
dhcpsAddIp: Add static IP to the DHCP server.
Usage : dhcpsAddIp [mac(00-00-00-00-00-00)] [ip(xxx.xxx.xxx.xxx)]
dhcpsDelIp: Delete static IP from the DHCP server.
Usage : dhcpsDelIp [ip(xxx.xxx.xxx.xxx)]
dhcpsBindingNum: Print binding number of the DHCP server.
Usage : dhcpsBindingNum
dhcpsShowStatic: Print static IP of the DHCP server.
Usage : dhcpsShowStatic
natShow : Show NAT link table information.
Usage : natShow
triggerPort: Set trigger port, when public port num is 0 will delete this entry..
Usage : triggerPort [index] [port] <protocol> [public port num] [start] [end] [protocol]....
triggerShow: Show trigger port information.
Usage : triggerShow
gethostbyname: gethostbyname.
Usage : gethostbyname
tftpc : TFTP client.
Usage : tftpc <GET|PUT> <host> <remotename> <localname>
tftps : Start TFTP server.
Usage : tftps [dir] [timeout]
update : Update runtime code (need to download image file "download" to /tmp).
Usage : update
setAccessHost: Add/delete access host.
Usage : setAccessHost [NET(xx.xx.xx.xx)] [MASK (xx.xx.xx.xx)] <index>
accessHostShow: Show access host information.
Usage : accessHostShow
ripStart : Enable RIP .
Usage : ripStart [version]
ripStop : Disable RIP .
Usage : ripStop
ripShow : Show RIP table .
Usage : ripShow
ripShow2 : Show RIP table 2 .
Usage : ripShow2
testMD5 : Test MD5.
Usage : testMD5
ripSet : Set RIP status ,receiveMode ,and sendMode.
Usage : ripSet [status(1|2 = Enable|Disable] [sendMode(1|2|3|4 = RipV1|RipV2|RipV1Compatible|Disable)] [receiveMode(1|2|3|4 = RipV1|RipV2|RipV1Compatible|Disable)]
ripDebug : Set RIP debug mode.
Usage : ripDebug mode(1|0 = enable|disable)
apstate : Show AP statistics.
Usage : apstate [0: stop|1: start]
netdbg : Switch network debug mode.
Usage : netdbg
neterrcnt : Show network error count.
Usage : neterrcnt
setmode : set bridge mode or routing mode.
Usage : setmode
setnitro : set Nitro mode.
Usage : setnitro
setnonerp : set protection mode.
Usage : setnonerp
wsBasic : set Basic Rate(1~14).
Usage : wsBasic
wsTxrate : set Tx Rate(1~13).
Usage : wsTxrate
wgTxrate : get Tx Rate.
Usage : wgTxrate
init6996 : initial ADM6996.
Usage : init6996
readreg : Read ADM6996 Reg.
Usage : ReadReg
clkhi : Set Clock HI .
Usage : clkhi
clklow : Set Clock Low.
Usage : clklow
URLHashTableShow: Show URL Hash Table.
Usage : URLHashTableShow
wsssid : set ssid.
Usage : wsssid ssid
wsossid : set override-ssid.
Usage : wsossid [ossid]
wgssid : get ssid.
Usage : wgssid
wsch : set channel.
Usage : wsch channel
wgch : get channel.
Usage : wgch
wsfreq : set channel-Freq.
Usage : wsfreq channel
wgstaall : get associated STA info.
Usage : wgstaall
wgstaone : get associated STA info by index.
Usage : wgstaone <index>
wgsta : get STA info by index.
Usage : wgsta <index>
wgrate : get rates.
Usage : wgrates
wsprofile : set profile.
Usage : set profile_num
wshowbss : show all bss.
Usage : wshowbss
wshowmib : show wireless mib.
Usage : wshowmib
wshowwep : show device wep.
Usage : wshowwep
wgbssmax : get bss num.
Usage : wgbssmax
wgstamax : get sta num.
Usage : wgstamax
wspreamble: set preamble.
Usage : wspreamble <preamble>
wsmaxpow : set RF output power by channel.
Usage : wsmaxpow <channel> <power>
wgmaxpow : Get RF output power by channel.
Usage : wgmaxpow
wsantdiv : Set antenna diversity.
Usage : wsantdiv <antenna diversity>
wgantdiv : Show antenna diversity.
Usage : wgantdiv
wgpsm : get power save mode.
Usage : wgpsm
wspsm : set power save mode.
Usage : wspsm <a(active),p(powersave),d(dynamic)>
wswds : set wds link.
Usage : wswds <>
wsrmwds : remove wds link.
Usage : wsrmwds <>
wsaddwds : add wds link.
Usage : wsaddwds
wsdelwds : del wds link.
Usage : wsdelwds
wggetwds : get wds link.
Usage : wggetwds
wgwdslink : get wdslink on/off.
Usage : wgwdslink
wswdslink : set wdslink on/off.
Usage : wswdslink
wgscaninterval: get scan interval .
Usage : wgscaninterval
wsscaninterval: set scan interval .
Usage : wsscaninterval <interval>
wgallwds : all wds on air .
Usage : wgallwds
setdevstate: set wlan state.
Usage : setdevstate <h,s,r>
wds_init : Init wds.
Usage : wds_init
wpagetmode: get wpa mode.
Usage : wpagetmode
wpasetmode: set wpa mode.
Usage : wpasetmode [0:disable][1:enable_manual][2:enable_passphrase]
wpagetmkey: get manual key.
Usage : wpagetmkey
wpasetmkey: set manual key.
Usage : wpasetmkey <manual key>
wpagetakey: set pass-phrase str.
Usage : wpagetakey
wpasetakey: set pass-phrase str.
Usage : wpasetakey <ascii key>
wpashowc : show all wpa client.
Usage : wpashowc
wpagetgkupdate: get wpa group key update times.
Usage : wpagetgkupdate
wpasetgkupdate: set wpa group key update times.
Usage : wpasetgkupdate <count>
wpasetnomicerror: set wpa no mic error value.
Usage : wpasetnomicerror [0:handle mic error][1:do not handle mic error]
memCheck : check dynamic memory pool.
Usage : memCheck
crashlogprint: Print crash logs.
Usage : crashlogprinf
delshiparea: Delete Shipping Area Setting.
Usage : delshiparea
r6996s : Read ADM6996 serial register.
Usage : r6996s [address]
r6996E : Read ADM6996 EEPROM register.
Usage : r6996E [address]
w6996E : Write ADM6996 EEPROM register.
Usage : w6996E [address] [data]
wr6996E : Write and Read ADM6996 EEPROM register.
Usage : wr6996E [address] [data]
radiusget : get radius info.
Usage : radiusget <index>
radiusset : set radius info.
Usage : radiusset <index> <ip> <port> <secret> <nas id>
dot1xmodeset: set dot1x mode.
Usage : dot1xmodeset <mode>
dot1xidleset: set dot1x idle session timeout.
Usage : dot1xidleset <timeout value>
dot1xreauthset: set dot1x re-authentication period.
Usage : dot1xreauthset <period time>
dot1xquietset: set dot1x quiet period.
Usage : dot1xquietset <period time>
dot1xsummary: get dot1x setting summary.
Usage : dot1xsummary
dot1xshowauth: show dot1x auth pool.
Usage : dot1xshowauth
|
files
|
cmd> ls
D nv
D dev
D tmp
D etc
4 File(s) 0 bytes
cmd> ls /etc
F 22 resolv.conf
1 File(s) 22 bytes
cmd> ls /tmp
F 16384 eventlog
F 16384 dhcpclog
F 524288 download
3 File(s) 557056 bytes
cmd> ls /nv
F 20 mode_cfg
F 85 download_cfg
F 1539 user
F 428 ddns_dyndns
F 212 ddns_tzo
F 196 ddns_noip
F 140 ddns_dyncom
F 16 time_zone_cfg
F 72 sntpc_cfg
F 12 usr_time
F 224 ip_cfg
F 44 dns_relay_cfg
F 1132 pppoecfg
F 72 dhcpc_cfg
F 43 nat_cfg
F 320 nat_cfg_masq
F 920 nat_cfg_rd
F 3150 nat_cfg_vs
F 72 nat_cfg_dmz
F 1900 nat_cfg_trg
F 328 route_cfg
F 284 dhcps
F 152 dhcpsblk
F 3810 dhcpsstls
F 28 firewall_cfg
F 4 ip_defense_cfg
F 204 ip_filter_cfg
F 8 http_cfg
F 32 access_host_cfg
F 620 pptpcfg
F 272 ethftr_cfg
F 196 mail_cfg
F 608 usr_dot1x_cfg
F 32 admin_cfg
F 136 bpa_login_cfg
F 48 ip_bootup
F 4 usr_wan_ping
F 1204 urlblocking_cfg
F 4 usr_country_cfg
F 588 ap_cfg
F 244 wdslink_cfg
F 4 usr_filter
F 760 usr_schrule
F 780 usr_accessctrl
F 1200 usr_blocking
F 120 dstiprule_cfg
F 260 cnnctrl_cfg
F 260 assctrl_cfg
F 12 alldmz_cfg
F 58 upnp_cfg
F 32 usrsvs_cfg
F 96 usr_sandbox_cfg
F 4 usr_wizard_cfg
F 40 cso_cfg
F 28 usr_syslog_cfg
F 4 usr_ddnsp
56 File(s) 23061 bytes
cmd> ls /dev
F 0 flash0
F 0 uart0
2 File(s) 0 bytes
|
semShow
|
cmd> semShow
Semaphore Table List
-------------------------------------------------------
Name Type Count TasksWaitting
=======================================================
0. MFS_SEM FIFO 1 0
1. netSem FIFO 0 1
2. netTime FIFO 1 0
3. splSem FIFO 1 0
4. hosttbl FIFO 1 0
5. mblksem PRIORITY 1 0
6. mclsem PRIORITY 1 0
7. FLSH FIFO 1 0
8. sio_Rx0 FIFO 0 0
9. sio_RT0 FIFO 1 0
10. NVRAM FIFO 1 0
11. modecfg FIFO 1 0
12. CrashLo FIFO 1 0
13. eventLo FIFO 1 0
14. downloa FIFO 1 0
15. user_cf FIFO 1 0
16. ddns_dy FIFO 1 0
17. ddns_tz FIFO 1 0
18. ddns_no FIFO 1 0
19. ddns_dy FIFO 1 0
20. time_zo FIFO 1 0
21. sntpc_c FIFO 1 0
22. usrtime FIFO 1 0
23. ip_cfg FIFO 1 0
24. dns_rel FIFO 1 0
25. pppoe_c FIFO 1 0
26. dhcpc_c FIFO 1 0
27. dhcpcLo FIFO 1 0
28. DhcpcSe FIFO 1 0
29. dhcpcMu FIFO 1 0
30. dhcpcEv FIFO 1 0
31. dhcp_ti FIFO 1 0
32. leaseSe FIFO 1 0
33. nat_cfg FIFO 1 0
34. port_ma FIFO 1 0
35. route_c FIFO 1 0
36. dhcps_c FIFO 1 0
37. ip_fire FIFO 1 0
38. ip_defe FIFO 1 0
39. ip_filt FIFO 1 0
40. http_cf FIFO 1 0
41. access_ FIFO 1 0
42. pptp_cf FIFO 1 0
43. ethftr_ FIFO 1 0
44. mail_cf FIFO 1 0
45. usr_dot FIFO 1 0
46. admin_c FIFO 1 0
47. bpa_log FIFO 1 0
48. ip_boot FIFO 1 0
49. usr_wan FIFO 1 0
-------------------------------------------------------
|
ifShow
|
cmd> ifShow
lo (unit number 0):
Flags: (0x8069) UP LOOPBACK MULTICAST ARP RUNNING
Type: SOFTWARE_LOOPBACK
Internet address: 127.0.0.1
Netmask 0xff000000 Subnetmask 0xff000000
Metric is 0
Maximum Transfer Unit size is 1536
0 packets received; 0 packets sent
0 multicast packets received
0 multicast packets sent
0 input errors; 0 output errors
0 collisions; 0 dropped
adm (unit number 0):
Flags: (0x9963) UP BROADCAST MULTICAST PROMISCUOUS ARP RUNNING
Type: ETHERNET_CSMACD
Internet address: 192.168.2.1
Broadcast address: 192.168.2.255
Netmask 0xffffff00 Subnetmask 0xffffff00
Ethernet address is 00:13:f7:09:89:d6
Metric is 0
Maximum Transfer Unit size is 1500
0 packets received; 2 packets sent
0 multicast packets received
2 multicast packets sent
0 input errors; 0 output errors
0 collisions; 0 dropped
adm (unit number 1):
Flags: (0x8963) UP BROADCAST MULTICAST PROMISCUOUS ARP RUNNING
Type: ETHERNET_CSMACD
Netmask 0xe52de004 Subnetmask 0xa000360
Ethernet address is 00:13:f7:09:89:d7
Metric is 0
Maximum Transfer Unit size is 1500
0 packets received; 10 packets sent
0 multicast packets received
0 multicast packets sent
0 input errors; 0 output errors
0 collisions; 0 dropped
adm (unit number 2):
Flags: (0x8963) UP BROADCAST MULTICAST PROMISCUOUS ARP RUNNING
Type: ETHERNET_CSMACD
Netmask 0xe52de004 Subnetmask 0xa000360
Ethernet address is 00:13:f7:09:89:d6
Metric is 0
Maximum Transfer Unit size is 1500
0 packets received; 2 packets sent
0 multicast packets received
2 multicast packets sent
0 input errors; 0 output errors
0 collisions; 0 dropped
|
memShow
cmd> memShow
Memory Pool List
--------------------------------------------------------------------------
Name StartAddr Size MinAlloc Available Type TasksWaiting
===========================================================================
0. KenMem 0x3AB7EC 1835008 48 549688 FIFO 0
1. FileMem 0x56B86C 1179648 48 144 FIFO 0
2. SysMem 0x68B8EC 1197844 48 961976 FIFO 0
---------------------------------------------------------------------------
knlShow
|
cmd> knlShow
Task Table List
-------------------------------------------------
Name Priority Status
=================================================
0. KnlTask 0 QUEUE_SUSPEND
1. tNetTas 50 SEMAPHORE_SUSPEND
2. tNvTask 100 SLEEP_SUSPEND
3. ddns 100 QUEUE_SUSPEND
4. tSntpc 100 SLEEP_SUSPEND
5. tDnsPro 99 SEMAPHORE_SUSPEND
6. tDhcpcT 100 QUEUE_SUSPEND
7. tDhcpsT 100 QUEUE_SUSPEND
8. tHttpD 99 SEMAPHORE_SUSPEND
9. tHtpTsk 99 QUEUE_SUSPEND
10. clitask 5 READY
11. MailD 100 SLEEP_SUSPEND
12. tFpi 100 SLEEP_SUSPEND
13. tDot1x 100 SLEEP_SUSPEND
14. tDiscov 100 SEMAPHORE_SUSPEND
-------------------------------------------------
Memory Pool List
--------------------------------------------------------------------------
Name StartAddr Size MinAlloc Available Type TasksWaiting
===========================================================================
0. KenMem 0x3AB7EC 1835008 48 549688 FIFO 0
1. FileMem 0x56B86C 1179648 48 144 FIFO 0
2. SysMem 0x68B8EC 1197844 48 961976 FIFO 0
---------------------------------------------------------------------------
Semaphore Table List
-------------------------------------------------------
Name Type Count TasksWaitting
=======================================================
0. MFS_SEM FIFO 1 0
1. netSem FIFO 0 0
2. netTime FIFO 1 0
3. splSem FIFO 1 0
4. hosttbl FIFO 1 0
5. mblksem PRIORITY 1 0
6. mclsem PRIORITY 1 0
7. FLSH FIFO 1 0
8. sio_Rx0 FIFO 0 0
9. sio_RT0 FIFO 1 0
10. NVRAM FIFO 1 0
11. modecfg FIFO 1 0
12. CrashLo FIFO 1 0
13. eventLo FIFO 1 0
14. downloa FIFO 1 0
15. user_cf FIFO 1 0
16. ddns_dy FIFO 1 0
17. ddns_tz FIFO 1 0
18. ddns_no FIFO 1 0
19. ddns_dy FIFO 1 0
20. time_zo FIFO 1 0
21. sntpc_c FIFO 1 0
22. usrtime FIFO 1 0
23. ip_cfg FIFO 1 0
24. dns_rel FIFO 1 0
25. pppoe_c FIFO 1 0
26. dhcpc_c FIFO 1 0
27. dhcpcLo FIFO 1 0
28. DhcpcSe FIFO 1 0
29. dhcpcMu FIFO 1 0
30. dhcpcEv FIFO 1 0
31. dhcp_ti FIFO 1 0
32. leaseSe FIFO 1 0
33. nat_cfg FIFO 1 0
34. port_ma FIFO 1 0
35. route_c FIFO 1 0
36. dhcps_c FIFO 1 0
37. ip_fire FIFO 1 0
38. ip_defe FIFO 1 0
39. ip_filt FIFO 1 0
40. http_cf FIFO 1 0
41. access_ FIFO 1 0
42. pptp_cf FIFO 1 0
43. ethftr_ FIFO 1 0
44. mail_cf FIFO 1 0
45. usr_dot FIFO 1 0
46. admin_c FIFO 1 0
47. bpa_log FIFO 1 0
48. ip_boot FIFO 1 0
49. usr_wan FIFO 1 0
-------------------------------------------------------
Timer Table List
-------------------------------------------------------
Name Status InitialTime Expirations
=======================================================
0. t0 Enable 98 0
1. t1 Disable 19 1
2. t2 Enable 49 0
3. tsysClk Enable 1 0
4. t3 Enable 98 0
5. t4 Enable 5880 0
6. t5 Disable 1 1
7. t6 Enable 6272 0
8. t7 Enable 58800 0
9. SelTime Enable 5 0
10. SelTime Enable 2 0
-------------------------------------------------------
Message queue List
--------------------------------------------------------------------------
Name StartAddr Size Available Suspend TasksWaiting
===========================================================================
0. KnlQueu 0x68EA00 10 10 FIFO 1
1. netq 0x68EADC 100 99 FIFO 0
2. ddnsd 0x6965A8 10 10 FIFO 1
3. sntpc 0x699EF0 1 1 FIFO 0
4. dnsprox 0x69C2D4 10 10 FIFO 0
5. dhcpEve 0x69F288 10 10 FIFO 1
6. dhcpsEv 0x6A4CDC 10 10 FIFO 1
7. httpdq 0x6A76AC 10 10 FIFO 0
8. httpd 0x6A7808 10 10 FIFO 1
9. maild 0x6AE474 10 10 FIFO 0
---------------------------------------------------------------------------
Event Group List
--------------------------------------------
Name Flag tasksWaiting
=============================================
-----------------------------------------------
|
timerShow
cmd> timerShow
Timer Table List
-------------------------------------------------------
Name Status InitialTime Expirations
=======================================================
0. t0 Enable 98 0
1. t1 Disable 19 1
2. t2 Enable 49 0
3. tsysClk Enable 1 0
4. t3 Enable 98 0
5. t4 Enable 5880 0
6. t5 Enable 1 0
7. t6 Enable 6272 0
8. t7 Enable 58800 0
9. SelTime Enable 5 0
10. SelTime Enable 2 0
-------------------------------------------------------
taskShow
cmd> taskShow
Task Table List
-------------------------------------------------
Name Priority Status
=================================================
0. KnlTask 0 QUEUE_SUSPEND
1. tNetTas 50 READY
2. tNvTask 100 SLEEP_SUSPEND
3. ddns 100 QUEUE_SUSPEND
4. tSntpc 100 READY
5. tDnsPro 99 SEMAPHORE_SUSPEND
6. tDhcpcT 100 QUEUE_SUSPEND
7. tDhcpsT 100 QUEUE_SUSPEND
8. tHttpD 99 SEMAPHORE_SUSPEND
9. tHtpTsk 99 QUEUE_SUSPEND
10. clitask 5 READY
11. MailD 100 READY
12. tFpi 100 READY
13. tDot1x 100 SLEEP_SUSPEND
14. tDiscov 100 SEMAPHORE_SUSPEND
-------------------------------------------------